• 자원리싸이클링
• /
• 제15권3호
• /
• pp.38-45
• /
• 2006

슬러지 층에 열을 가함으로서 내부증발압, 여액 점도 저하에 따른 유동성 증대 그리고 기공형성 용이성을 통하여 슬러지의 탈수율을 향상시킬 수 있는 열 필터프레스 탈수 기술을 개발하였다. 크기 $470{\times}470mm$인 PP재질의 맨브레인 플레이트 사이에 열수가열판을 장착하여 온도 $95^{\circ}C$, 압력 $1.2kg_f/cm^2$의 열 수를 공급한다. 그리고 슬러지는 최초 슬러지의 $5kg_f/cm^2$의 공급압력에 의해 1 차 탈수가 이루어지며, 맨브레인의 압착력 $15kg_f/cm^2$에 의해 2차적 탈수 공정으로 이루어진다. 갈수기와 우수기때의 슬러지의 초기 함수율 및 유기물 함량을 고려하여 열 탈수 특성을 평가한 결과 우수기의 슬러지는 케이크의 함수율이 약 35 wt%이며, 탈수 속도는 $4DSkg/m^2{\cdot}hr$로 매우 탈수성 우수하였으며, 갈수기 때의 슬러지 또한 함수율이 50 wt%, 탈수속도가 $1.5kg/m^2{\cdot}hr$이상으로 기계식 탈수의 탈수율(함수율 70 wt%, 탈수속도 $0.9kg/m^2{\cdot}hr$)에 비하여 우수하였다. 이를 바탕으로 열 필터프레스 탈수장치의 추가 소요 에너지를 평가한 결과 고형물(DS) 1 kg처리하는데 소요되는 에너지는 약 300kJ로 평가되었다. 이는 탈수케이크를 재차 건조하는 시스템과 의 에너지 투입비를 분석해 본 결과 열 탈수장치의 에너지 소요량은 약 1/3정도로 감소된 것으로 분석되었다. 본 기술은 기존의 필터프레스에 비하여 탈수 속도가 빠르고 저 함수율 탈수 케이크 생산이 용이할 뿐만 아니라 건조장치에 비하여 에너지 소모량이 적어 경제성이 우수한 시스템으로 파악되었다.

• 한국약용작물학회지
• /
• 제22권2호
• /
• pp.140-146
• /
• 2014

This study was carried out to investigate the difference of the content of soil chemical components and growth characteristics in six years old ginseng affected by application of decomposing plant residues in paddy-converted field. The results show that aerial parts of ginseng are no difference between press cake (PC) 200 kg/10a and control but subterranean parts of ginseng PC 200 kg/10a, especially quantity related root fresh weight and tap root diameter, are statically about 1.6 times heavier and about 1.2 times thicker than the ginseng control. Furthermore, the survival rate of PC 200 kg/10a is 67.1% rise significantly compare with the control 50.7%. But compared with the PC 200 kg/10a and the PC 400 kg/10a, ginseng root growth and survival rate of PC 400 kg/10a get worse and that increase physiological disorder occurrence rate than PC 200 kg/10a. Even though there are no significant differences between the ginseng of decomposing plant residues except press cake treatment and the ginseng of control in growth characteristics, it does tend to increase the survival rate and decrease the physiological disorder occurrence rate in most fertilizer treatment except for RSC 2 ton/10a, RSC 4 ton/10a and RH 4 kL/10a. Noted that EC is highly increased and exceeded 1.7 ds/m in RSC 2 ton/10a, RSC 4 ton/10a and RH 4kL/10a. It would be caused physiological disorder in many ways and affected ginseng growth characteristics, survival rate.

• 한국식품과학회지
• /
• 제25권1호
• /
• pp.28-32
• /
• 1993

들깨종자의 압착착유에 미치는 온도와 압력의 영향을 살펴보기 위해 생들깨와 볶은들깨의 기름의 추출율 및 압착케이크의 부피변형율을 각각의 온도, 압력 및 압착시간에서 관찰하였다. 본 실험을 위해 들깨종자의 수분함량은 2.5%로 조절하였고 온도는 30, 40, 50 및 $60^{\circ}C$가 사용되었고 압력은 10, 30, 50 및 70 MPa을 적용하였으며 압착시간은 5, 7, 9 및 11분을 적용하였다. 온도, 압력 그리고 압착시간이 증가할수록 기름의 추출율 및 압착케이크의 부피변형율은 증가를 하였다. 생들깨와 볶은들깨의 최대 추출율은 $60^{\circ}C$, 70 MPa, 11분에서 각각 85.59% 및 85.30%이었다. 추출된 기름의 점도는 지수함수적인 온도의존성을 보여주었으며, 점도가 낮을수록 즉, 온도가 높을수록 기름의 추출율은 증가하였다. 압착요인과 기름의 추출율 및 압착케이크의 부피변형율과의 상관관계 분석에서 압착요인의 효과는 압력, 온도, 온도${\times}$압력 그리고 압착시간 순으로 감소하였다. 온도(T), 압력(P) 그리고 압착시간(D)과 기름의 추출율(Y)과의 관계는 생들깨는 $Y=7.95+36.85P+1.12T^2-0.55TP-5.08P^2(r^2=0.97\;p<0.01)$였으며, 볶은들깨는 $Y=4.50T+39.23P+0.83T^2-1.71P-5.07P^2(r^2=0.99,\;p<0.01)$이었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권5호
• /
• pp.1098-1107
• /
• 2001

This study is to develop the pretreatment for the excess and digested sludge by elector-coagulation and dewatering. Electrocoagulation is applied to excess and digested sludge before transferring to the pistion type for dewatering. Piston type filter press as a laboratory scale plant was used to estimate the dewaterability. MMD of excess sludge was increased from initial diameter of particles ($34.16{\mu}m$) to the 87%($64.01{\mu}m$) after electrocoagulation. Al electrode is more effective than Fe electrode for the dewaterabiltity of excess sludge Electrodewatering after electrocoagulation as pretreatment makes the water content of sludge cake 50~60 wt%.

• 한국환경과학회지
• /
• 제13권7호
• /
• pp.681-687
• /
• 2004

This study was focused on the manufacturing method of a dewatering aid, which would reduce the water content of the sludge cake by enhancing the dewaterability of sewage sludge. The pretreatment technology for sludge by using radiation and among diverse discarded resources were starfish selected as the material to manufacture the dewatering aid. Starfish went through the process of washing, drying, and pulverizing. The starfish powder made in this process was applied to the digested sludge generated at the sewage treatment plant of D City, and its effects were investigated. The starfish powder that was 300 ${\mu}m$ in particle size was added to the irradiated digested sludge. After the application of the condensation process, the sludge with the starfish powder added was dewatered using the belt press and centrifuge, which were the traditional pressure dewatering devices. As the result, it reduced the water content of the sludge 20% higher than the dewatered cake with no dewatering aid added and irradiation. When the powder was added, it contributed to less use of the coagulant added. The more irradiation dose, the lower water content did the dewatered cake have and the more coagulant was needed for condensation, which seems to be a disadvantage that can be compensated for by the starfish dewatering aid. A small-scaled treatment of the study to a radiation technology and dewatering aid using a discarded resource confirmed the potential of dewaterability. Based on the results saying that the dewatering aid and radiation technology can improve dewatering effects using the traditional dewatering devices, this pretreatment technology will be expected to be applied to sewage treatment plants.

• Membrane and Water Treatment
• /
• 제6권2호
• /
• pp.161-172
• /
• 2015

Forward osmosis (FO) is an emerging membrane technology with potential applications in desalination and wastewater reclamation. The osmotic pressure gradient across the FO membrane is used to generate water flux. In this study, flux performance and foulant deposition on the FO membrane were systematically investigated with a co-current cross-flow membrane system. Sodium alginate (SA), bovine serum albumin (BSA) and tannic acid (TA) were used as model foulants. Organics adsorbed on the membrane were peeled off via oscillation and characterized by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). When an initial flux of $8.42L/m^2h$ was applied, both flux reduction and foulant deposition were slight for the feed solution containing BSA and TA. In comparison, flux reduction and foulant deposition were much more severe for the feed solution containing SA, as a distinct SA cake-layer was formed on the membrane surface and played a crucial role in membrane fouling. In addition, as the initial SA concentration increased in FS, the thickness of the cake-layer increased remarkably, and the membrane fouling became more severe.

• 펄프종이기술
• /
• 제40권2호
• /
• pp.65-72
• /
• 2008

This work evaluated the extractability of tobacco stem biomass for the papermaking type Reconstituted Tobacco Sheet(RTS). The effects of the soaking conditions on the hydration of stem biomass and the effects of the hydrated state on the mechanical extraction were investigated. In order to simulate the mechanical expression process of a papermaking type RTS mill, for example, the screw press process, the novel mechanical pressing analyzer was developed for this study. The hydration of stem biomass by soaking process was greatly affected by the soaking time and the soaking temperature. The longer soaking time and the higher soaking temperature resulted in the higher hydrated stem biomass. Since the higher hydrated stem had more combined water in the inner structure and resulted in the more flexible structure, the higher hydrated stem leaded to the more compressed filter cake and the higher water contents in the filter cake after the mechanical pressing. The pilot pulping experiments showed the difference in hydration and extractability between burley and bright tobacco stem. The bulkier structure of the burley stem resulted in the faster hydration by pilot pulping and leaded to the larger reduction in water soluble components. And the hydration process showed the major influence on the separation efficiency of water soluble components.

• 유기물자원화
• /
• 제22권3호
• /
• pp.23-32
• /
• 2014

최근 들어 유기성폐기물의 혐기소화를 이용한 처리(에너지화)가 증가하고 있다. 이에 따라서 혐기소화 후 발생하는 혐기소화폐액의 처리방안에 대한 연구도 증가하고 있다. 그러나, 혐기소화폐액의 특성상 문제로 고액분리에 매우 어려움이 있다.이에 본 연구에서는 CST와 TTF를 이용하여 혐기소화폐액에 대한 응집에 따른 고액분리 특성을 파악하였다. 또한 이러한 문제를 해결하기 위하여 실험실수준의 멤브레인 필터프레스를 제작하고, 혐기소화폐액에 적용하였다. 고분자 응집제는 7192PLUS와 1T60가 가장 적합한 것으로 확인되었으며, 최소 7192PLUS (200 mg/L), 1T60 (100 mg/L)이상의 투입이 필요하였다. 탈수효율을 평가하기 위하여 탈수케이크의 함수율과 탈리여액의 입자성 고형물을 이용하였다. 결과적으로, 멤브레인 필터프스를 이용하여 고액분리 시 입자성 고형물의 제거효율은 97.4%로 높게 나타났으며, 탈수케이크의 함수율은 65%이하로 나타났다.

• 한국연초학회지
• /
• 제28권1호
• /
• pp.36-42
• /
• 2006

The papermaking process for a reconstituted tobacco sheet (RECON) has been preferred more because of the various merits such as a wide range of Recon products with better quality. The screw press is one of the very important process in RECON making process which divides the mixed raw materials into the soluble material and the insoluble material and could greatly affect the productivity and product quality. In this study, the characteristics of the screw press process in a Recon making mill were evaluated for two different RECON products. Three different efficiency index were proposed for the more detailed analysis of the screw press process. The result showed that the difference in the raw material might result in the difference in the efficiency and the properties of the extracts and the filter cake, especially in the HWS. The washing technique which applied in this experiment showed the amount of residual HWS in the fiber portion were not much changed by the each steps of the screw press.

• 대한환경공학회지
• /
• 제35권1호
• /
• pp.23-30
• /
• 2013

슬러지 처분비용은 하수처리장 운영에 있어서 중요한 경제적 요소이다. 더욱이, 2013년부터 유기성 폐기물의 해양투기가 금지되면서 대부분의 슬러지가 육상 처리 되어야 하기 때문에 슬러지의 발생량을 줄이는 것이 시급한 상황이다. 본 연구에서는, 초음파와 전기장 처리에 의한 하수슬러지의 탈수성 향상을 확인하고자 하였다. 슬러지는 pilot-scale의 전처리 장치로 초음파와 전기장 단독처리 그리고 초음파 및 전기장 병합처리 되었으며, 처리 후 lab-scale 필터프레스 장치로 탈수되었다. 실험한 초음파 에너지 밀도 범위는 225~1,200 kJ/L였고 전기장 처리장치는 4.5~24 kJ/L였다. 초음파 단독처리와 초음파 및 전기장 병합처리 된 슬러지의 탈수 cake 함수율은 에너지 밀도 1,200 kJ/L일 때, 처리하지 않은 슬러지보다 각각 10~12% 감소하였으며 이 때 슬러지 함수율은 65~66%였다. 초음파 및 전기장 병합처리가 초음파 단독처리보다 탈수된 슬러지 cake의 함수율을 낮추는데 효과적이었으나, 전기장 단독처리의 경우 에너지 밀도가 낮아 함수율의 변화는 거의 없었다.