• 한국식품영양학회지
• /
• 제12권2호
• /
• pp.170-176
• /
• 1999

Optimum preparation conditions of Korean traditional sweet rice drink 'malt-Sikye' were 1hour of rice soaking time 30min of malt extraction time 60$^{\circ}C$ of malt extraction tem-perature 60$^{\circ}C$ of saccharification temperature 1hour of agitation interval 5hour of saccharification time 5.5 of pH 4% of malt concentration and 20% of rice content. The malt-Sikhy contained to 17.1% of total sugar 11.2% of reducing sugar o.34mg/ml of protein and 4.7${\mu}$mol/ml of amino acid. The most abundant sugar found in malt-Sikhye was maltose. The commercial amylolytic enzymes were not effec-tive in preparation malt-Sikye.

• 한국식품조리과학회지
• /
• 제11권3호
• /
• pp.220-225
• /
• 1995

This study was attempted to standardize preparation methods of Korean foods; Chigae (Stew) such as Deonjang chigae (soybean stew) and Kimchi chigae (Kimchi stew). We followed cooking methods by using cookbooks, food service operation recipes, materials distributed by commercial food restaurants from their own experimental kitchens, and home recipes. Before this recipes were standardized, we thoroughly analyzed and modified them. The total yield and portions were determined together with material weights and procedures. And we evaluated food made by standardized recipes for acceptability, by taste panels from Sookmyung Women＇s University. It concluded that yield volune for doenjang chigae and kimchi chigae after cooking for 10 persons was 3 kg, optimum service temperature was 7$0^{\circ}C$, preparation time was 50 minutes, service volumes by one person was 300 g. This presentantion for the above on food materials and material weights, preparation methods as well as cautions and references are attached in this research paper.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.328-334
• /
• 2008

The effects of catalyst preparation on the reaction route and the mechanism of biphenol (BP) hydrogenation, which consists of a long series-reaction, were studied. Pd/C catalysts were prepared by incipient wetness method and precipitation and deposition method. The reaction behaviors of the prepared catalysts and a commercial catalyst along with the final product distributions were very different. The choice of the catalyst preparation conditions during precipitation and deposition including the temperature, pH, precursor addition rate, and reducing agent also had significant effects. The reaction behaviors of the catalysts were interpreted in terms of catalyst particle size, metal distribution, and support acidities.

• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.372-381
• /
• 2015

본 연구에서는 $Ni/Al_2O_3$ 촉매를 사용한 에틸렌글리콜의 수증기 개질반응에서 제조 방법에 따른 영향을 알아보았다. 촉매들은 건식 함침법, 습식 함침법 그리고 공침법을 사용하여 제조하였다. 공침법을 사용하여 촉매 제조시 침전제를 KOH, $K_2CO_3$, $NH_4OH$를 각각 사용하여 침전제에 따른 영향 또한 알아보았다. 제조한 촉매들은 질소 물리흡착, 유도결합 플라즈마 질량분석법(ICP-AES), X선 회절법(XRD), 수소 승온 환원법(TPR), 수소 화학흡착, 승온 산화법(TPO), 주사전자현미경(SEM), 열분석법(TGA)을 사용하여 촉매의 물리화학적인 특성을 분석하였다. 773 K에서 환원한 촉매의 경우 KOH 혹은 $K_2CO_3$를 침전제로 사용하여 공침법으로 제조한 촉매가 가장 높은 활성을 보였다. 촉매 제조 방법은 Ni의 입자크기, Ni 산화물의 환원도, 반응에서의 활성과 안정성, 반응 중 탄소 침적의 형태 등에 영향을 끼치는 것을 확인할 수 있었다. KOH를 침전제로 사용하여 공침법으로 제조한 촉매의 경우 환원온도를 773~1173 K까지 증가시켰을 때, Ni 입자크기의 증가에도 불구하고 Ni 산화물의 환원도가 증가하므로 반응활성이 증가하는 것으로 나타났다.

• 대한화학회지
• /
• 제15권5호
• /
• pp.223-228
• /
• 1971

In the electrolytic preparation of persulphate from sulphate solution, the current efficiency decrease with temperature increase at the platinum anode. But in case of electrodeposited lead peroxide anode, the current efficiency increase with temperature of the solution. The reason seems to be that the ozone formation is faster in platinum anode than in lead peroxide as temperature increase.

• Carbon letters
• /
• 제2권3_4호
• /
• pp.176-181
• /
• 2001

A series of activated carbons were prepared from coconut shells and coal-tar pitch binder by physical activation with steam in this study. The effect of variable processes such as activation temperature, activation time and ratio of mixing was investigated for optimizing those preparation parameters. The activation processes were carried out continuously. The nitrogen adsorption isotherms at 77 K on pellet-shaped activated carbons show the same trend of Type I by IUPAC classification. The average pore sizes were about 19-21${\AA}$. The specific surface areas ($S_{BET}$) of pellet typed ACs increased with increasing the activation temperature and time. Specific surface area of AC treated for 90 min at temperature $900^{\circ}C$ was 1082 $m^2/g$. The methylene blue numbers continuously increased with increasing the activation temperature and time. On the other hand, iodine numbers highly increased till activation time of 60 min, but the rate of increase of iodine numbers decreased after that time. This indicates that new micropores were created and the existing micropores turned into mesopores and macropores because of increased reactivity of carbon surface and $H_2O$.

• 한국세라믹학회지
• /
• 제36권7호
• /
• pp.698-704
• /
• 1999

Li rich Li1+xMn2-xO4(x=0.07) spinel powders were prepared by an oxalate precipitation of wet chemical methods at temperature lower than $600^{\circ}C$. The FTIR results showed that the powders prepared at $600^{\circ}C$ had high degree of crystal quality comparing with the spinel powders prepared by solid state reaction at 75$0^{\circ}C$ which was the lowest synthesis temperature of the solid state reaction method. The particle size of powders prepared by the oxalate precipitation at $600^{\circ}C$ was smaller than 0.2${\mu}{\textrm}{m}$ and the specific surface area was 11.01 m2/g A heat treatment over 90$0^{\circ}C$ formed second phase in the precipitates. It was shown that there were phase transitions at temperatures. T1,T2 and T2. The transitions involved weight loss and gain during heating and cooling. The low temperature synthesis below $600^{\circ}C$ avoided the second phase formation and the prepared powders showed improved compositional and physical properties for secondary lithium battery applications.

• 한국응용과학기술학회지
• /
• 제24권1호
• /
• pp.67-73
• /
• 2007

Methane combustion over perovskite catalysts was investigated. For the preparation of catalysts, Co, Mn, Fe, and Ni were used as B-site components of the perovskite catalysts $(ABO_3)$ and La was used as A-site component. The effect of calcination temperature on methane combustion and perovskite structure was also investigated. The structure of perovskites, surface area, and adsorbed oxygen species were tested with XRD, BET apparatus, and $O_2-TPD$, respectively. The formation of perovskite structure was affected by the calcination temperature. The catalyst desorbing oxygen at a lower temperature showed better activity for the methane combustion, therefore, the oxygen species desorbing at lower temperatures is responsible for the methane combustion.

• 한국수소및신에너지학회논문집
• /
• 제2권1호
• /
• pp.57-67
• /
• 1990

This study is proposed to investigate the effect of electrode preparation method for Alkaline Fuel Cell using NaOH as an electrolyte on the Fuel Cell performance. The materials used for the preparation of electrode are Pt and Ag on Vulcan XC-72. Surface area of Vulcan XC-72 have different values according to the pretreatment conditions and the dispersion of Pt is dependent on the impregnation Particle size of Pt impregnated on unpretreated carbon was observed to be $20{\sim}40{\AA}$ and that on pretreated carbon in $N_2$ stream at $950^{\circ}C$ was found to be finely dispersed less then $15{\AA}$. The electrode performance was affected by the particle size of metals and operating temperature. It was revealed from this study that the optimum particle size about $30{\AA}$ and optimum temperature range is between $90{\sim}100^{\circ}C$.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.17-22
• /
• 2004

폐 처리된 Ba, Sr 페라이트를 사용하여 GHz 대역용 전파흡수체를 개발하였다. 도전 손실재인 카본의 첨가에 따른 전파흡수능의 변화와 시편의 뚜께 그리고 시편 제작시 제작온도 변화에 따른 전파흡수능의 변화를 조사하였다. 이와 같은 실험을 통하여 CHz 대역용 Ba, Sr 페라이트 전파흡수체를 개발하는데 있어 카본의 첨가가 매우 유효함을 알았으며, 시편의 제작온도 또한 우수한 전파흡수체를 개발하는데 있어 반드시 고려되어야 함을 밝혔다. 이와 같은 실험을 실시하여 20dB 이상의 전파흡수체를 개발 할 수 있었다.