• 제목/요약/키워드: Preparation conditions

검색결과 1,697건 처리시간 0.03초

음이온성 Poly(bis[4-(3-aminophenoxy)phenyl]sulfone pyromellite)Imide Derivatives 한외여과막의 투과특성 (Influence of Ion Exchange Capacity on the Performance of Ultrafiltration Membrane Prepared from Anion Charged Poly(bis[4-(3-aminophenoxy)phenyl]sulfone pyromellite)imide Derivatives)

  • Jong-Young Jeon
    • 멤브레인
    • /
    • 제14권1호
    • /
    • pp.26-36
    • /
    • 2004
  • 상전환 방법으로 제조된 음이온 성 Poly(his[4-(3-aminophenoxy)phenyl]sulfone pyromellite)imide(ACPI) 한외여과막의 순수 투과유속과 용질 배재도 측정치로 투과성능을 연구하였다. ACPI 한외여과막의 투과성능은 캐스팅 용액의 조성과 막 제조 및 측정조건에 영향을 받았다. Bovine serum albumin (BSA) 용액을 pH 2.5-9.0 상태에서 ACPI 한외여과 막의 상대투과유속과 membrane filtration index (MFI) 측정한 결과 BSA의 등전점에서 멀어 질수록 상대투과유속은 증가하고 막 오염정도를 나타내는 MFI는 감소하였다. 또한, 친수성인 ACPI 한외여과막의 이온교환용량(IEC)이 증가할수록 상대투과유속은 증가하고, MFI는 감소하였다.

Determination of Corticosteroids in Moisturizers by LC-MS/MS

  • Park, Sumin;Choi, Gye Young;Lee, Seon-Ah;Kim, Hyun Jeong;Yum, Hye Yung;Paeng, Ki-Jung
    • Mass Spectrometry Letters
    • /
    • 제7권1호
    • /
    • pp.26-29
    • /
    • 2016
  • Simultaneous determination of three corticosteroids (clobetasol propionate, betamethasone dipropionate, fluticasone propionate) in moisturizers was performed by using liquid chromatography (LC) coupled with tandem mass spectrometry (MS/MS). Sample preparation was conducted by the liquid-liquid extraction (LLE). Moisturizers include emulsifying agent and it forms micelles. In order to improve the extraction efficiency of corticosteroids trapped in micelle, newly developed-optimized extraction conditions which can remove the matrix effect from moisturizers was applied with various pH conditions in LLE extraction stage of sample preparation. Thus, the addition of 10 μL of 1 M HCl into moisturizers sample before extraction could improve the extraction efficiency. For the quantitative analysis, SRM table that contained specific transition of all of target corticosteroids was created. The developed method was validated for linearity, accuracy, precision, limit of detection (LOD), limit of quantization (LOQ) and recovery. Over the 0.99 r2 value was obtained in calibration standard range. Effective accuracy and precision were also obtained. LODs were below 31 ng/mL and LOQs were estimated below 94 ng/mL for all corticosteroids tested.

청국장${\cdot}$양파 첨가 피자 제조 : 1. 반응표면분석을 이용한 피자크러스트 제조의 최적화 (1. The development of Pizza with Chungkukjang and Onion : Optimization of Pizza Crust Preparation Using Response Surface Methodology)

  • 성채란;김창순
    • 한국식품조리과학회지
    • /
    • 제23권4호통권100호
    • /
    • pp.481-491
    • /
    • 2007
  • This study was conducted to develop pizza crust with additions of Chungkukjang and onion. The stickiness of the pizza dough containing fresh Chungkukjang (C), heated Chungkukjang (HC), and fresh Chungkukjang with added dough-improver (CI), was measured to evaluate the dough properties. The optimum conditions for pizza crust preparation relating to the processing suitability and sensory quality were established using response surface methodology (RSM). When HC and CI were used in dough making, dough stickiness was reduced to 37% and 51%, respectively. Therefore, the dough-improver(2%) offered the pizza dough better rheological properties when C was used without heat treatment. On the other hand, processing suitability such as the spreadability and overall acceptability, which included the smell and taste of the pizza, were impaired as the amount of CI increased. However, the use of fresh ground onion in the pizza dough compensated for these impairments. The optimum conditions for pizza crust making as determined by RSM were 25.1% onion, 7.1% Chungkukjang, and 52.3 min of fermentation time.

Preparation, characterization of activated carbon fiber from luffa and its application in CVFCW for rainwater treatment

  • Ahmed, Sanjrani Manzoor;Zhou, Boxun;Zhao, Heng;Zheng, You Ping;Wang, Yue;Xia, Shibin
    • Membrane and Water Treatment
    • /
    • 제11권2호
    • /
    • pp.151-158
    • /
    • 2020
  • ACF preparation from different materials has been attached with great attention during these years. This study was conducted to prepare activated carbon fiber (ACF) from luffa through the processes i.e pre-treatment, pre-oxidation and carbonization activation. Besides, this study also characterizes the ACF and its effect, i.e effect of pre-oxidation time and temperature also activation time and temperature on the compressive strength of ACF were investigated. The results from SEM, BET, FTIR and XRD show that the ACF is very efficient. The products under the optimum conditions had a specific surface area of 478.441 m2 /g with an average pore diameter of 3.783nm, and a pore volume of 0.193 cm3 /g. The surface of the luffa fiber is degummed and exposed, which is beneficial to the subsequent process and the increase of product properties. The compressive strength of HP-ACF was prepared under the optimum conditions, which can reach 0.2461 MPa. ACF is rich in micro-pores and has a good application prospect in the field of environmental protection.

Comparison of optimal temperature and time conditions for highest a-glucosidase inhibitory activity from various of Korea mulberry teas

  • Ju, Wan-Taek;Kim, Hyun-Bok;Sung, Gyoo-Byung;Kim, Yong-Soon
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제33권1호
    • /
    • pp.31-35
    • /
    • 2016
  • The influence of commonly used steeping times and temperatures about mulberry tea on a-glucosidase inhibitory activity were studied. The effects of product and preparation variables on the in-cup chemical composition of mulberry tea extracts is of interest because the appearance and taste characteristics and the possible health effects of a tea liquor arise from the chemical components extracted from the leaf during mulberry tea preparation. A comprehensive study was therefore undertaken to determine the contributions of product and provide a basic data for development of high quality mulberry tea products against diabetes. Specific eight mulberry tea were collected from each region of Korea (A-I) and when it was extracted on 85℃ for 2min, a-glucosidase activity was best for 98-102%. According to various temperature and time extraction methods, this study was carried out to optimize teamaking conditions for maximal DNJ extraction from Korean mulberry tea and and it would be of particular interest for people who drink mulberry tea to control blood glucose levels.

Preparation of PVDF/PEI double-layer composite hollow fiber membranes for enhancing tensile strength of PVDF membranes

  • Yuan, Jun-Gui;Shi, Bao-Li;Ji, Ling-Yun
    • Membrane and Water Treatment
    • /
    • 제5권2호
    • /
    • pp.109-122
    • /
    • 2014
  • Polyvinylidene fluoride (PVDF) hollow fiber membrane is widely used for water treatment. However, the weak mechanical strength of PVDF limits its application. To enhance its tensile strength, a double-layer composite hollow fiber membrane, with PVDF and polyetherimide as the external and inner layers, respectively, was successfully prepared through phase inversion technique. The effects of additive content, air gap distance, N,N-dimethyl-acetamide content in the inner core liquid, and the temperature of external coagulation bath on the membrane structure, permeation flux, rejection, tensile strength, and porosity were determined. Experimental results showed that the optimum preparation conditions for the double-layer composite hollow fiber membrane were as follows: PEG-400 and PEG-600, 5 wt%; air gap distance, 10 cm; inner core liquid and the external coagulation bath should be water; and temperature of the external coagulation bath, 40 C. A single layer PVDF hollow fiber membrane (without PEI layer) was also prepared under optimum conditions. The double-layer composite membrane remarkably improved the tensile strength compared with the single-layer PVDF hollow fiber membrane. The permeation flux, rejection, and porosity were also slightly enhanced. High-tensile strength hollow fiber PVDF ultrafiltration membrane can be fabricated using the proposed technique.

Effect of Preparation Conditions on the Hydrogenation Activity and Metal Dispersion of Pt/C and Pd/C Catalysts

  • Jhung, Sung-Hwa;Lee, Jin-Ho;Lee, Jong-Min;Lee, Ji-Hye;Hong, Do-Young;Kim, Myong-Woon;Chang, Jong-San
    • Bulletin of the Korean Chemical Society
    • /
    • 제26권4호
    • /
    • pp.563-568
    • /
    • 2005
  • The Pt/C and Pd/C catalysts were prepared from conventional chloride precursors by adsorption or precipitation-deposition methods. Their activities for hydrogenation reactions of cyclohexene and acetophenone were compared with those of commercial catalysts. The Pt/C and Pd/C catalysts obtained from the adsorption procedure reveal higher hydrogenation activity than commercial catalysts and the catalysts prepared by the precipitation-deposition method. Their improved performances are attributed to the decreased metal crystallite sizes of Pt or Pd formed on the active carbon support upon the adsorption of the precursors probably due to the same negative charges of the chloride precursor and the carbon support. Under the preparation conditions studied, the reduction of the supported catalysts using borohydrides in liquid phase is superior to a gas phase reduction by using hydrogen in the viewpoint of particle size, hydrogenation activity and convenience.

Alumina Supported Ammonium Dihydrogenphosphate (NH4H2PO4/Al2O3): Preparation, Characterization and Its Application as Catalyst in the Synthesis of 1,2,4,5-Tetrasubstituted Imidazoles

  • Emrani, Anahita;Davoodnia, Abolghasem;Tavakoli-Hoseini, Niloofar
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권7호
    • /
    • pp.2385-2390
    • /
    • 2011
  • Preparation of ammonium dihydrogenphosphate supported on alumina ($NH_4H_2PO_4/Al_2O_3$) and its primary application as a solid acid supported heterogeneous catalyst to the synthesis of 1,2,4,5-tetrasubstituted imidazoles by a one-pot, four-component condensation of benzil, aromatic aldehydes, primary amines, and ammonium acetate under thermal solvent-free conditions were described. The results showed that the novel catalyst has high activity and the desired products were obtained in high yields. Furthermore, the products could be separated simply from the catalyst, and the catalyst could be recycled and reused with only slight reduction in its catalytic activity. Characterization of the catalyst was performed by FT-IR spectroscopy, the $N_2$ adsorption/desorption analysis (BET), thermal analysis (TG/DTG), and X-ray diffraction (XRD) techniques.

MgO 증착 변수에 따른 AC-PDP의 수명 특성 연구 (A Study on the Lifetime Characteristics of AC-PDP as a Parameter of MgO Preparation)

  • 최민석;김영락;최윤창;박차수;김동현;이호준;박정후
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 C
    • /
    • pp.1631-1635
    • /
    • 2002
  • In order to be good display, the ac PDP lifetime should be guaranteed over 30000 hours. Therefore, to satisfy these demands, it is need to find out main factors in ac PDP affecting the lifetime. In this paper, the characteristics of lifetime as a parameter of the MgO deposition rate conditions is investigated. MgO protective layers is fabricated by E-beam. Before measuring the lifetime we have carefully peformed high temperature evacuation and aging procedure, which is essential for providing the initial condition of our experiment. If MgO deposition rate increased, MgO film becomes dense and an adhesive power of MgO film gets better and because occurrence rate of the MgO cluster decreases, lifetime of MgO will be improved. As a result, ac PDP lifetime can be improved due to the improvement of MgO by MgO preparation conditions.

  • PDF

Optimization of Shark (Squatina oculata) Cartilage Hydrolysis for the Preparation of Chondroitin Sulfate

  • Jo, Jin-Ho;Do, Jeong-Ryong;Kim, Young-Moung;Kim, Dong-Soo;Lee, Taek-Kyun;Kim, Seon-Bong;Cho, Seung-Mock;Kang, Suk-Nam;Park, Douck-Choun
    • Food Science and Biotechnology
    • /
    • 제14권5호
    • /
    • pp.651-655
    • /
    • 2005
  • Enzymatic hydrolysis of shark (Squatina oculata) cartilage (SC) was optimized by response surface methodology (RSM) for chondroitin sulfate (CS) preparation. Among 11 commercial proteases, Maxazyme NNP showed highest productivity (CS yield per enzyme cost) of CS. Optimal hydrolysis conditions determined by RSM were 1.63% and 2.87 hr for enzyme concentration and hydrolysis time ($r^2\;=\;0.9527$, p<0.0l), respectively and highest yield of hydrolysate under the conditions was 42.3%. The yield ($43.1{\pm}2.1%$) and CS content ($24.8{\pm}0.1%$) of hydrolysate at optimal condition verified statistical optimization of SC enzymatic hydrolysis was valid.