• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.175-181
• /
• 1994

In order to accelerate the rate of consolidation settlement and to gain a required shear strength for a given soft clay deposit, the preloading technique combined with a vertical drainage system has been widely applied. In this study, the theory of axisymmetric concolidation, which considers the variation of compressibility and permeability during the consolidation process, has been developed. Smear and well resistance effects are also considered. Furthermore, several back-analysis schemes such as simplex method, BFGS method, and ADS have been adopted in the axisymmetric consolidation program(AXICON). The measured data in the first stage of consolidation are utilized to predict the subsequent consolidation behavior.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2007년도 추계학술대회 및 제23회 정기총회
• /
• pp.176-178
• /
• 2007

부산신항 북컨테이너터미널 민차부두 1단계 공사에 적용된 안벽기초는 하부 대섬도 연약점토층 개량을 위한 SCP(Sand Compaction Pile) 개량층과 그 상부에 약 6m정도의 사석층으로 구성되어 있다. 안벽은 케이슨식으로 상부의 크레인 풍의 공용하중 작용시에 발생이 예상되는 안벽기초의 과도한 지반침하 방지를 위해 근고블럭에 의한 Preloading 공법이 적용되었다. 따라서, 프리로딩에 의한 하부기초지반의 침하관리가 중요 공사관리 포인트가 된다. 그러나, SCP층이나 사석총에 대한 침하량 예측은 반경험적 방법에 의존하기 때문에 실제와 상당한 차이가 발생하게 된다 본 연구에서는 사석층의 진동다짐에 의한 시공 특성을 반영하기 위해 굴착치환구간의 사석층에 대한 실측값을 이용하여 Terzaghi 변형식의 침하계수 a를 재산정하여 SCP개량구간에 적용함으로써 보다 합리적인 안벽기초의 침하량을 분석하였고 이를 사석층의 여성고 산정에 이용하였다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (1)
• /
• pp.253-255
• /
• 2003

오늘날 많은 가전제품들은 다양화. 쌍방성, 효율성, 개방성등 정보화 시대의 주요 특징들과 접목되어 생산되고 있으며, 이중 모바일 제품군(Low End)은 각광받는 주류 제품이라 할 수 있다. 그러나 대부분의 모바일 제품들은 그 특성상 파일 시스템을 지원하지 못하고 있기에, 본 논문에서 모바일 제품의 운영체제로서 파일 시스템이 지원되지 않는 실시간 운영체제(RTOS- Real Time Operation System)를 선택하여 가상머쉰(VM-Virtual Machine)을 설계 및 구현하였다. 위의 지원을 위해 자바 클래스 파일을 C 언어 형태로 변환하여 VM 과 직접적으로 링크하는 방법인 프리링킹(Prelinking), 프리로딩(Preloading) 혹은 로마이징(ROMizing)이라고 알려져 있는 기법을 도입하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1256-1263
• /
• 2010

Suction Drain Method is soft ground improvement technique, in which a vacuum pressure can be directly applied to the Vertical Drain Board to promote consolidation and strengthening the soft ground. This method does not require a surcharge load, different to embankment or Preloading Method. In this study, ground improvement efficiency of suction drain method was estimated when duplex loading pressure with vacuum and pressure. During suction drain method process, surface settlement and pore pressure were monitored, and cone resistance test as well as water content were also measured after the completion of Suction Drain Method treatment.

• 한국정밀공학회지
• /
• 제24권8호통권197호
• /
• pp.89-96
• /
• 2007

In this paper, a new air bearing stage with magnetic preload and a linear motor has been developed for the small precision machine systems. The new air bearing stage is unique in the sense that permanent magnets attached bottom of the iron core of table are used not only for preloading air bearings in vertical direction but also for generating thrust force by current of the coil at base. The characteristics of air bearings using porous pads were analyzed with numerical method, and the magnetic circuit model was derived for linear motor for calculating required preload force and thrust force. A prototype of single axis miniature stage with size of $120(W){\times}120(L){\times}50(H)\;mm^3$ was designed and fabricated and examined its performances, vertical stiffness, load capacity, thrust force and positioning resolution.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.763-768
• /
• 2000

The purpose of this paper is to predict the flexural strengthening of reinforced concrete beams by the external bonding of carbon fiber reinforced plate(CFRP) to the tension face of the beam. Used computational equation is derived by relation of stress an strain. This equation is applied to four-nondamage beam and tow-preloading beam. Six scale beams were tested to evaluate the strength enhancement provided by the CFRP. And describes the strength enhancement provided to the flexural capacity of reinforced concrete beam by the external bonding of CFRP. An inelastic section analysis procedure was developed that accurately predicts the load displacement response of the retrofitted beams.

• 한국지반공학회논문집
• /
• 제17권5호
• /
• pp.83-96
• /
• 2001

선행압밀공법에서 지반으로부터 배출되는 물을 신속히 배수시키기 위해 연약지반상에 수평배수층을 설치한다. 종전의 연구에 의하면(예, Giroud(1981), 한국도로공사(1998)), 배수층의 통수능은 성토하중의 성토기간 또는 압밀속도의 영향을 받으며, 성토기간이 짧을 때에는 과다한 배수능이 요구된다. 이 논문에서는 선행압밀공법에 적용 가능한 새로운 압밀해석방법을 사용하여 소요통수능을 재검토하고 새로운 실용공식을 제안하였다. 전반적인 압밀침하량이 5%이내에서 지연될 때에는 소요통수능은 성토기간의 영향을 받지 않는다는 것을 알게 되었다. 또한 소요통수량은 압축지수, 압밀계수 및 수평배수층의 배수거리의 제곱에 비례한다는 것도 밝혀졌다.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.955-963
• /
• 2005

This research investigates dynamic characteristics of a linear motion (LM) guide through a experimental result and theoretical analysis. The stiffness in the LM guide is determined by the preloading due to the minus clearance between the ball bearing and the contact surface and it can be derived by Hertzian contact theory and the nonlinear motion of equation. The vibration analysis is performed using Lagrange equations and its result agrees with the experiment result. Using the sensitivity analysis on design parameters such as the contact angles of ball bearings and the eccentricity of mass center, the variation of the natural frequencies can be predicted.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1992년도 가을학술발표회 논문집
• /
• pp.121-130
• /
• 1992

Assessement of comsolidation characteristics of soft soil is very important in the project of soft soil improvement. In the design step, the consolidation characteristics of soil is determined by the laboratory tests (typically oedometer test), generally. But there is big differences between the condition of laboratory test and the condition of field(in situ). the differences results in the considerable difference between the predicted and measured consolidation behavior. This article analyzed the consolidation data of the "SOFT SOIL IMPROVEMENT PROJECT of the 2nd Namdong Industrial Complex at Inchon". The project was improving the road way net work in the 2nd Namdong Industrial Complex by preloading and sand pile method. Field instrumentation was performed at 10 points which consist of pneumatic piezometers, magnetic probe extensometers, inclinometers and electronic dipmeter. The results showed that there is big difference in the laboratory predicted consolidation behavior and field consolidadion behavior. Also there was big difference in the settlement behavior and pore pressure behavior. This article investigated the above factors by comparing the settlement, pore pressure and strength at different conditions.onditions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.501-507
• /
• 1996

The final objectives of this study are to present the theoretical formula for reasonable structural analysis and practical codes on the repair/strengthening of damaged reinforced concrete structrues. For that purpose, in last year, preliminary experiments for flexure and shear of beam structure using carbon sheet and steel plate were performed, and in sequence, in this year, using aramid fiber sheet and steel plate more extensive experiment were performed. Repair for the performance of flexure and shear was focused on, and main variables were selected considering aplicablilty for practical field, such as, spacing of anchor bolt, lapping, jacking up, preloading level, and fiber difection as well as length of repairing plate and thickness. so new results from various angles are to be presented.