• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권1호
• /
• pp.26-30
• /
• 2002

A droplet fractionation method was previously developed to concentrate a dilute nonfoaming protein solution. In that earlier study with invertase, it was demonstrated that droplets created by ultrasonic energy waves could be enriched up to 8 times that of the initial dilute invertase solution. In this study, a mixture of bromelain (a foaming protein) and invertase (a nonfoaming protein) is investigated as a preliminary step to determine if droplet fractionation can also be used to separate a non-foaming protein from foaming proteins. The foaming mixture containing bromelain is first removed by bubbling the binary mixture with air. After the foam is removed, the protein rich air-water interfacial layer is skimmed off (prior to droplet fractionation) so as not to interfere with the subsequent droplet production from the remaining bulk liquid, rich in non-foaming protein. Finally, sonic energy waves are then applied to this residual bulk liquid to recover droplets containing the non-foaming protein, presumed to be invertase. The primary control variable used in this droplet fractionation process is the pH, which ranged for separate experiments between 2 and 9. It was observed that the maximum overall protein partition coefficients of 5 and 4 were achieved at pH 2 and 4, respectively, for the initial foaming experiment followed by the post foaming droplet fractionation experiment.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1995년도 광학 및 양자전자학 워크샵 논문집
• /
• pp.185-189
• /
• 1995

A high-power Nb:glass laser system(Simmyung I) has been contructed and tested. In this system, we used a Nb:YLF laser as a master oscillator, a 4-pass amplifier for pre-amplification, 5 stages of rod amplifiers, and spatial filtering and image reaying usits. The system has demonstrated in excess of 80J(2TW) with 40 psec(FWHM) pulse duration. Output energy, gain and spatial were measured at each amplification stage. With this laser system a preliminary X-ray generation experiment was performed. Pinhole images, X-ray diode signals and X-ray speriment were obtained for the irradiated target of copper. Detailed descriptions of the system performance and the X-tay generation experiment are presented.

• 한국기계가공학회지
• /
• 제13권4호
• /
• pp.56-68
• /
• 2014

This paper presents an experiment on the modeling, analysis, prediction and optimization of machining parameters used during the turning process of the low-carbon steel known as ST40. The parameters used to develop the model are the cutting speed, the feed rate, and the depth of the cut. The experiments were carried out under various conditions, with three level of parameters and two different treatments for each level (with and without a lubricant), to determine the effects of the parameters on the surface roughness and electric current consumption. These effects were investigated using response surface methodology (RSM). A second-order model is used to predict the values of the surface roughness and the electric current consumption from the results of experiments which collected preliminary data. The results of the experiment and the predictions of the surface roughness and electric current consumption under both treatments were found to be nearly identical. This result shows that the feed rate is the main factor that influences the surface roughness and electric current consumption.

• Water Engineering Research
• /
• 제7권1호
• /
• pp.21-28
• /
• 2006

The scouring process is complex and subject to many factors. Recently, experiments for real-time bridge scour monitoring have been active as means for a more reliable scour prediction. Riverbed materials are an important factor in bridge scouring; therefore, an accurate estimation of riverbed material is critical in predicting a scour. As a part of this approach, an ultrasonic sensor, which can not only detect river bottom during floods but can also be installed lose to the underwater structures, was developed. This sensor is able to map the river bottom using an ultrasonic waves with the characteristics of the returning wave, reflected from an object or bottom ground. The reflected wave is unique according to the situations, or materials below. Therefore, it would be possible to identify the consisting materials of a riverbed if we could reveal each characteristic in the received signals. In this study, a preliminary experiment was performed in the laboratory to identify and classify received signals, which is unique to each material. The analysis of this experiment gives the graph, which makes it possible to identify materials of the river bottom through the ultrasonic signals. The proposed graph was verified through a comparison with the actual field data measured in river.

• 대한원격탐사학회지
• /
• 제22권4호
• /
• pp.255-264
• /
• 2006

2002년 3월에 발사 된 GRACE (Gravity Recovery and Climate Experiment)는 미국과 독일 합작으로 개발된 최초의 지구중력장 측정 전용 위성으로 동일한 궤도를 비행하는 두 개의 위성 사이 거리 변화를 측정하여 지구 중력장을 추정하는 사업이다. 위성 발사 후 이전 보다 수 십배 정확한 지구중력장 모델을 생성하였으며, 지구중력장 변화도 30일마다 추정하고 있다. GRACE 위성의 핵심 관측기인 위성간 거리 측정기의 원리에 대해 소개하고, 운용 결과 및 성능에 대해 소개 하였다. 발사 전 성능 분석 단계에서 고려되지 못했던 거리측정기 오차 요인에 대해 분석하고, 향후 연구 방향을 제시 하였다.

• 수산해양교육연구
• /
• 제23권4호
• /
• pp.734-744
• /
• 2011

This study has examined the effect of music Rope-skipping on body composition and health related blood components of middle school students. The experiment has been performed for 12 weeks, varying the exercise intense depending on preliminary stage, elementary and intermediate stage and conclusion is as follows based on the change in body composition, blood components related to health before and after the experiment. All males and females showed decreased, but there were no statistically different in body fat mass and body fat percentage. Fat-free mass of males showed decreased and females had an increased, but there were no statistically different. Regarding body-mass index of males and females were on the decreased, but there were no statistically different. As for hematocrit of males and females statistically grew by about 4.53%(p<.05). The number of erythrocyte and leukocyte in males and females showed increased, but there were no statistically difference. Concerning hemoglobin of males and females showed a increased(p<.01). The number of thrombocyte of males and females were on the increased, but there were no statistically different. Cholesterol in males and females were on the decreased, but it was not statistically different. Blood glucose of males and females were on the decreased(p<.05).

• 공업화학
• /
• 제32권5호
• /
• pp.574-580
• /
• 2021

최고 품질의 클렌징 제품 개발을 위해서 계면활성제 혼합물 조성의 최적화를 시도하였다. 사전실험을 통해 세정력, 기포형성력, 오염률에서 각각 우수한 특성을 나타내는 계면활성제 3종 sodium cocoyl alaninate (SCoA), cocamidopropyl betaine (CPB), decyl glucoside (DG)을 선정하였다. 계면활성제 혼합물의 심플렉스 중심 설계 배열에 따른 실험을 수행하고, 실험에서 얻어진 데이터를 가지고 회귀분석을 실시하였다. 통계적으로 유의미한 반응 표면 모델식을 구하고, 세 개의 반응변수의 동시 최적화 과정을 통해 계면활성제 혼합물의 최적 조성은 SCoA (0.22), CPB (0.78), DG (0.00)으로 구해졌다.

• 로봇학회논문지
• /
• 제14권3호
• /
• pp.191-195
• /
• 2019

This paper presents a rope modeling and verification for the robotic platform of the wall cleaning robot (ROPE RIDE). ROPE RIDE has the characteristics of climbing up and down using a rope fixed on the roof like traditional workers. In order to perform a stable operation with a wall cleaning robot, it is necessary to estimate the position of the robot in a vertical direction. However, due to the high coefficient of extension and nonlinearity of the climbing rope, it is difficult to predict the behavior of the rope. Thus, in this paper, the mathematical modeling of the rope was carried out through the preliminary experiment. Extensive experiments using different types of rope were used to determine the parameters of the constitutive equation of climbing ropes. The validity of the determined parameters of various ropes was verified through the experiment results.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.873-881
• /
• 2002

In this paper, a on-line estimation method of the radial immersion angle using cutting force is presented. The ratio of cutting forces in feed and cross-feed directions acting on the single tooth at the immersion angle is a function of the immersion angle and the ratio of radial to tangential cutting force. It is found that the ratio of radial to tangential cutting force is not affected by cutting conditions and axial rake angle, which implies that the ratio determined by one preliminary experiment can be used regardless of the cutting conditions for a given tool and workpiece material. Using the measured cutting force during machining and predetermined ratio, the radial immersion ratio is estimated in process. Various experimental results show that the proposed method works within 5% error range.

• Journal of Korean Vacuum Science & Technology
• /
• 제4권4호
• /
• pp.112-121
• /
• 2000

The paper investigates electrical discharge properties in neon gas mixed with xenon. The breakdown temperature T$\sub$b/ and voltage V$\sub$b/ are obtained in terms of the gas mixture ratio X. It is shown that the breakdown voltage decreases, reaches the minimum value at X=0.02 and then increases again, as the mixture ratio X increases from zero to unity. Therefore, mixing the neon gas with a few percent of xenon is the most beneficial to reduce the breakdown voltage. Plasma density at breakdown in neon gas mixed with xenon is described in terms of the gas mixture ratio. The optimum value of mixture ratio for highest plasma density is found to be Xm=0.03. A preliminary experiment of AC-PDP is carried out for neon gas mixed with a few percent of xenon to verify some of the theoretical models. The experimental data agree qualitatively well with theoretical predictions.