• 한국해양공학회지
• /
• 제17권6호
• /
• pp.65-71
• /
• 2003

Since the preflex beam is fabricated through welding, the pre-compressive stresses that should occur over the concrete pier are diminished by the welding residual stresses. Therefore welding residual stresses must be relieved during the fabrication. Therefore, the analysis and examination of the accurate welding residual stress distribution characteristics are necessary. In this study, accurate distribution of welding residual stress of the preflex beam is analyzed by the finite element method, using 2 dimensional and 3 dimensional elements. Further, the thermo-mechanical behavior of the preflex beam is also studied. After the finite element analysis, real distribution of welding residual stress is measured using the sectioning method, and then is compared with the simulation results. The distribution of welding residual stress by finite analysis agreed well with the experimental results.

• Journal of Welding and Joining
• /
• 제22권2호
• /
• pp.33-37
• /
• 2004

Since the preflex beam is fabricated by welding, the pre-compressive stresses that should occur over the concrete pier are diminished by the welding residual stresses. For this reason distribution of welding residual stresses must be analyzed accurately and welding residual stresses should be relieved during the fabrication. In this study strain history, displacement of beam and re-distributed welding residual stresses by different loading conditions are measured and compared to choose more appropriate preflex condition.

• 한국해양공학회지
• /
• 제18권2호
• /
• pp.52-57
• /
• 2004

Preflex beam is a method of construction designed to hold the pre-compressive stresses over the concrete pier by the preflexion load. During the fabrication of the girder, welding causes residual stresses. The welding residual stresses must be relieved in order to generate the accurate compressive pre-stresses. In this study, to determine the thermal distribution characteristics on the girder by welding, both three-dimensional finite element analysis and two-dimensional finite element analysis, in a quasi-steady state, is carried out. After comparing each result between the three-dimensional analysis and the two-dimensional analysis, finite element analysis is carried out against the actual girder, and the welding thermal distribution characteristic over the preflex beam is analyzed. It is possible to provide the input data for the analysis of the welding residual stresses.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1997년도 추계 학술논문발표회 논문집
• /
• pp.145-150
• /
• 1997

In this thesis, the field test by truck load and the structural analysis were performed on a preflex beam bridge to investigate the load carrying capacity. From the field test and the structural analysis results, K(corrective factor) and $P_n$(load carrying capacity) of the preflex beam bridges were studied, and these factors were applied to the load carrying capacity assessment of the preflex bridges.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.323-328
• /
• 2002

Since the pre flex beam is fabricated by welding, the precompressive stresses that should occur over the concrete pier are diminished by the welding residual stresses. Therefore the welding residual stresses must be relieved during the fabrication. So the analysis and examination of the accurate welding residual stress distribution characteristic are necessary. On this study, accurate distribution of welding residual stress of preflex beam is analyzed by finite element method.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.329-334
• /
• 2002

Preflex beam is a method of construction to hold the Pre-compressive stresses over the concrete pier by the Preflexion load. During the fabrication of the girder, welding causes the welding residual stresses. The welding residual stresses must be relieved to generate the accurate compressive pre-stresses that is designed. On this study, to find out the thermal distribution characteristics on the girder by welding, both the three-dimensional finite element analysis and the two-dimensional finite element analysis in a quasi-steady state is carried out. After comparing with each result between the three-dimensional analysis and the two-dimensional analysis, finite element analysis is carried out against the actual girder and analyze welding thermal distribution characteristic over the preflex beam and obtain the input data for the analysis of the welding residual stresses.

• 한국강구조학회 논문집
• /
• 제9권4호통권33호
• /
• pp.697-705
• /
• 1997

기존 프리플렉스 합성형 교량의 당면한 문제점은 하부 플랜지의 콘크리트 인장균열발생을 여하히 제어할 수 있느냐 하는 점이다. 본 논문에서는 이와 같은 문제점을 해결하기 위해 하부 플랜지 콘크리트부에 정적량의 PC강재를 도입하여 콘크리트에 압축력을 추가로 도입하므로써 프리플렉스 합성형이 전단면 압축(Full Prestressing)상태로 거동하도록 하는데 목표를 두고 검토하였다. 또한 이 과정에서 기존의 프리플렉스 합성형의 장점을 저해하지 않는 형고 및 단면의 유지 또는 개선과 경제성을 잃지 않도록 하였다. 여기서 개발한 새로운 개념의 합성형을 리프리스트레스트 프리플렉스 합성형(Represtressed Preflexional Composite Beam : 이하 RPF 합성형)이라 하고 해석, 설계, 시공의 전과정에 걸처서 작성된 유한요소해석프로그램(D.A.R.P.)을 이용하여 그 출력을 실물모형실험을 통해 비교, 검증하므로써 기존 프리플렉스 합성형의 문제점을 개선하면서도 경제성을 지는 거동특성을 확인할 수 있었다.

• 한국강구조학회 논문집
• /
• 제13권4호
• /
• pp.433-441
• /
• 2001

본 논문은 지점의 재 상승 및 하강을 이용한 3경간 연속 프리플렉스 합성형의 기본 개념을 소개하고 매개변수의 해석으로부터 각 변수가 위험단면의 응력에 미치는 영향을 검토하였다. 또한 기존 공법에 의한 단면을 본 논문의 공법에 적용하고 비교 분석하여 프리스트레싱 효과를 제시하였다. 본 논문의 지점 재 상승 및 하강을 이용한 3 경간 연속 프리플렉스 합성형의 제작 공법은 기존의 연속화 공법보다 경제적인 단면은 물론 동일한 단면을 사용할 경우에는 보다 안전한 응력 상대를 얻을 수 있었다.

• 콘크리트학회지
• /
• 제15권4호
• /
• pp.55-59
• /
• 2003

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.312-312
• /
• 2003