• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.127-132
• /
• 2011

In this study, calculation results of sediments yield prediction models were compared with the amount of dredging data for the Inje, Gangwon mountain region of Korea. MSDPM and LADMP were used as a sediments prediction model which was calibrated and modified to calculate the sediments yield of Korean mountain region. Both sediments yield prediction models were modified by using Threshold Maximum Rainfall Intensity and Total Minimum Rainfall Intensity and correction coefficient. After comparing with the amount of dredging, it was found that results of MSDPM is more accurate than the results of LADMP. Difference of results of MSDPM and the amount of dredging is 27.6% and difference of results of LADMP and the amount of dredging is 50.6%. Both sediments yield prediction models which were calibrated in this study can be used to calculate the sediments yield for the Korean mountain region.

• Journal of Korean Society of Forest Science
• /
• v.90 no.2
• /
• pp.176-183
• /
• 2001

Loblolly pine (Pinus taeda L.) is the most economically important timber producing species in the southern United States. Much attention has been given to predicting diameter distributions for the solution of multiple-product yield estimates. The three-parameter Weibull diameter distribution yield prediction systems were developed for loblolly pine plantations. A parameter recovery procedure for the Weibull distribution function based on four percentile equations was applied to develop diameter distribution yield prediction models. Four percentiles (0th, 25th, 50th, 95th) of the cumulative diameter distribution were predicted as a function of quadratic mean diameter. Individual tree height prediction equations were developed for the calculation of yields by diameter class. By using individual tree content prediction equations, expected yield by diameter class can be computed. To reduce rounding-off errors, the Weibull cumulative upper bound limit difference procedure applied in this study shows slightly better results compared with upper and lower bound procedure applied in the past studies. To evaluate this system, the predicted diameter distributions were tested against the observed diameter distributions using the Kolmogorov-Smirnov two sample test at the ${\alpha}$=0.05 level to check if any significant differences existed. Statistically, no significant differences were detected based on the data from 516 evaluation data sets. This diameter distribution yield prediction system will be useful in loblolly pine stand structure modeling, in updating forest inventories, and in evaluating investment opportunities.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.58-61
• /
• 1998

Anisotropy is closely related to the formability of sheet metal and should be considered carefully for more realistic analysis of actual sheet metal forming operations. In order to better describe anisotropic plastic properties of aluminum alloy sheets, a planar anisotropic yield function which accounts for the anisotropy of uniaxial yield stresses and strain rate ratios simultaneously was proposed recently[1]. This yield function was used in the finite element simulations of cup drawing tests for an aluminum alloy 2008-T4. Isotropic hardening with a fixed initial back stress based on experimental tensile and compressive test results was assumed in the simulation. The computation results were in very good agreement with the experimental results. It was shown that the initial back stress as well as the yield surface shape have a large influence on the prediction of the cup height profile.

• Journal of Biosystems Engineering
• /
• v.30 no.6 s.113
• /
• pp.360-365
• /
• 2005

Precision agriculture attempts to improve cropping efficiency by variable application of crop treatments such as fertilizers and pesticides, within field on a point-by-point basis. Therefore, a more complete understanding of the relationships between yield and soil properties is of critical importance in precision agriculture. In this study, the functional relationships between measured soil properties and rice yield were investigated. A supervised back-propagation neural network model was employed to relate soil chemical properties and rice yields on a point-by point basis, within individual site-years. As a results, a positive correlation was found between practical yields and predicted yields in 1999, 2000, 2001, and 2002 are 0.916, 0.879, 0.800 and 0.789, respectively. The results showed that significant overfitting for yields with only the soil chemical properties occurred so that more of environmental factors, such as climatological data, variety, cultivation method etc., would be required to predict the yield more accurately.

• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.253-258
• /
• 1998

The part I was for developing regression models to predict the moisture content, protein content and viscosity of brown and milled rice using Near Infrared(NIR) Reflectance analyzer. The purpose of this study(part II) is to measure fundamental data required for the prediction of rice quality, and to develop regression models to predict the protein content of brown and milled rice, brown rice yield from undried paddy powder by using Near Infrared(NIR) Reflectance analyzer. The results of this study were summarized as follows : The predicted values of protein contents obtained from the undried paddy powder were well correlated to the measured values from brown and milled rice. The predicted yields of brown rice from undried paddy powder were not well correlated to the lab measured values from dried paddy. Continuous study in wavelength selection and of constituent relationship is necessary for practical application.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1998.06b
• /
• pp.171-177
• /
• 1998

The part Ⅰ was for developing regression models to predict the moisture content, protein content and viscosity of brown and milled rice using Near Unfrared (NIR) Reflectance analyzer. The purpose of this study(part Ⅱ) is to measure fundamental data required for the prediction of rice quality , and to develop regression models to predict the protein content of brown and milled rice, brown rice yield from undreid paddy powder by using Near Infrared (NIR) Reflectance analyzer. The results of this study were summarized as follows . The predicted values of protein contents obtained from the undried paddy powder were will correlated to the measured values from brown and milled rice. The predicted yields of brown rice from undried paddy powder were not well correlated to be lab measured values from dried paddy. Continuous study in wavelength selection and of constituent relationship is necessary for practical application.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.98-105
• /
• 1999

As the IC(Integrated Circuit) has been densified and complicated, it is required to thorough process control to improve yield. Experts, for this purpose, focused on the process analysis automation, which is came from the strict data management in semiconductor manufacturing. In this paper, we presents the process analysis system that can analyze causes, for a output after processes. Also, the plasma etching process that highly affects yield among semiconductor process is modeled to predict a output before the process. To approach this problem, we use adaptively trained neural networks that exhibit superior accuracy over statistical techniques. And in comparison with methods in other paper, a method that history of trend for input data is considered is shown to offer advantage in both learning and prediction capability. This research regards CD(Critical Dimension) that is considerable in high integrated circuit as output variable of the prediction model.

• IE interfaces
• /
• v.22 no.3
• /
• pp.252-262
• /
• 2009

It is crucial to prevent low yields in the semiconductor industry. Since many factors affect variation in yield and they are deeply related, preventing low yield is difficult. There have been substantial researches in the field of yield prediction. Many researchers had used the statistical methods. Many studies have shown that artificial neural network (ANN) achieved better performance than traditional statistical methods. However, despite ANN's superior performance some problems such as over-fitting and poor explanatory power arise. In order to overcome these limitations, a relatively new machine learning technique, support vector machine (SVM), is introduced to classify the yield. SVM is simple enough to be analyzed mathematically, and it leads to high performances in practical applications. This study presents a new efficient classification methodology, Stepwise-SVM (SSVM), for detecting high and low yields. SSVM is step-by-step adjustment of parameters to be precisely the classification for actual high and low yield lot. The objective of this paper is to examine the feasibility of SVM and SSVM in the yield classification. The experimental results show that SVM and SSVM provides a promising alternative to yield classification for the field data.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.1
• /
• pp.47-55
• /
• 2021

The objective of this study was to access the effect of climate and soil factors on alfalfa dry matter yield (DMY) by the contribution through constructing the yield prediction model in a general linear model considering climate and soil physical variables. The processes of constructing the yield prediction model for alfalfa was performed in sequence of data collection of alfalfa yield, meteorological and soil, preparation, statistical analysis, and model construction. The alfalfa yield prediction model used a multiple regression analysis to select the climate variables which are quantitative data and a general linear model considering the selected climate variables and soil physical variables which are qualitative data. As a result, the growth degree days(GDD) and growing days(GD), and the clay content(CC) were selected as the climate and soil physical variables that affect alfalfa DMY, respectively. The contributions of climate and soil factors affecting alfalfa DMY were 32% (GDD, 21%, GD 11%) and 63%, respectively. Therefore, this study indicates that the soil factor more contributes to alfalfa DMY than climate factor. However, for examming the correct contribution, the factors such as other climate and soil factors, and the cultivation technology factors which were not treated in this study should be considered as a factor in the model for future study.

• Computers and Concrete
• /
• v.29 no.6
• /
• pp.433-444
• /
• 2022

Concrete's compressive strength is widely studied in order to understand many qualities and the grade of the concrete mixture. Conventional civil engineering tests involve time and resources consuming laboratory operations which results in the deterioration of concrete samples. Proposing efficient non-destructive models for the prediction of concrete compressive strength will certainly yield advancements in concrete studies. In this study, the efficiency of using radial basis function neural network (RBFNN) which is not common in this field, is studied for the concrete compressive strength prediction. Complementary studies with back propagation neural network (BPNN), which is commonly used in this field, have also been carried out in order to verify the efficiency of RBFNN for compressive strength prediction. A total of 13 input parameters, including novel ones such as cement's and fly ash's compositional information, have been employed in the prediction models with RBFNN and BPNN since all these parameters are known to influence concrete strength. Three different train: test ratios were tested with both models, while different hidden neurons, epochs, and spread values were introduced to determine the optimum parameters for yielding the best prediction results. Prediction results obtained by RBFNN are observed to yield satisfactory high correlation coefficients and satisfactory low mean square error values when compared to the results in the previous studies, indicating the efficiency of the proposed model.