• Structural Engineering and Mechanics
• /
• 제19권5호
• /
• pp.567-580
• /
• 2005

Numerous tests on concrete structure members under local pressure demonstrated that the compressive strength of concrete at the loaded surface is increased by the confinement effect provided by the enveloping concrete. Even though most design codes propose specific criteria for preventing bearing failure, they do not take into consideration size effect which is an important phenomenon in the fracture mechanics of concrete/reinforced concrete. In this paper, six series of square prism concrete blocks with three different depths (size range = 1:4) and two different height/depth ratios of 2 and 3 are tested under concentrated load. Ultimate loads obtained from the test results are analysed by means of the modified size effect law (MSEL). Then, a prediction formula, which considers effect of both depth and height on size effect, is proposed. The developed formula is compared with experimental data existing in the literature. It is concluded that the observed size effect is in good agreement with the MSEL.

• Journal of Advanced Research in Ocean Engineering
• /
• 제4권4호
• /
• pp.204-216
• /
• 2018

A ship repeatedly face free surface under rough sea conditions owing to relative motion with wave encounter. The impact pressure is transferred to the hull structure and causes structural damage. In this study, the bow flare slamming load of a container ship is estimated using computations fluid dynamics (CFD) and prescript formula according to various classifications. It is found that the bow flare slamming load calculated by the formulas of the common structural rule and ABS tends to be similar to the CFD results.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.158-159
• /
• 2021

When the porous concrete is exposed to the external environment, the internal relative humidity changes from time to time due to the inflow and outflow of moisture. This change in moisture is affected by temperature. The temperature and humidity of concrete is dominant in the carbonation rate, the largest cause of deterioration of concrete. In this study, actual weather data were used as boundary conditions. A carbonization model of concrete temperature and humidity and calcium hydroxide was constructed to perform long-term analysis. There is a slight error in the carbonation formula of the Japanese Academy of Architecture applying the Kishtani coefficient, a representative experimental formula related to carbonization, and the analysis result values. However, considering that it behaves very similarly, it is thought that a fairly reliable numerical analysis model has been established. A slight error is believed to be due to the fact that the amount of residual calcium hydroxide in the carbonated site has not yet been clearly identified.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.129-130
• /
• 2023

The compressive strength of concrete is greatly affected by the temperature inside the concrete at the initial age immediately after pouring. In the KCI Concrete Standard Specification, only the temperature correction strength (Tn) according to the curing temperature is applied in the mixing strength calculation formula, and mSn is not considered. The formula based on the Chrino model of the blast furnace slag concrete was calculated, and the strength of the structural concrete and the strength of the water cured specimen in the same mixture were compared with the predicted strength. As a result, the error between the predicted strength and the measured strength was greater in the structural concrete than in the concrete specimen.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.33.2-33.2
• /
• 2008

Korea Astronomy and Space Science Institute (KASI) is developing an empirical model for Korean Space Weather Prediction Center (KSWPC). This model predicts the geomagnetic storm strength (Dst minimum) by using only CME parameters, such as the source location (L), speed (V), earthward direction (D), and magnetic field orientation of an overlaying potential field at CME source region. To derive an empirical formula, we considered that (1) the direction parameter has best correlation with the storm strength (2) west $15^{\circ}$ offset from the central meridian gives best correlation between the source location and the storm strength (3) consideration of two groups of CMEs according to their magnetic field orientation (southward or northward) provide better forecast. In this talk, we introduce current status of the empirical storm prediction model development.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.160-160
• /
• 2008

In practical etching process, etch ant is sprayed on the metal-deposited panel through nozzles collectively connected to the manifold and that panel is usually composed of many PCB(printed circuit board)'s. The etching uniformity, the difference between individual PCB's on the same panel, has become one of most important features of etching process. In this paper, the prediction of nozzle trajectory has been performed by the combination of algebraic formula and numerical simulation. With the pre-determined geometrical factors of nozzle distribution, the trajectories of individual nozzles were predicted with the change of process operational factors such as panel speed, nozzle swing frequency and so on. As results, two dimensional distribution of impulsive force of etchant spray which could be considered as a key factor determining the etching performance have been successfully obtained. Though only qualitative prediction of etching uniformity have been predicted by the process developed in this study, the expansion to the quantitative prediction of etching uniformity is expected to be apparent by this study.

• 한국음향학회지
• /
• 제34권1호
• /
• pp.52-59
• /
• 2015

국내 철도의 환경 소음 예측을 위해서 기존에는 총합 소음도의 거리별 경험식에 기초한 모델을 이용하였던 바, 교량 주변 소음도를 계산하는 데에도 거리만의 함수를 이용하였다. 그러나 콘크리트교에서는 수음점의 거리뿐만 아니라 위치에 따라서도 소음도가 변화한다. 본 논문에서는 철도 콘크리트교에서 교량 상판에 의한 회절 및 지면 효과를 고려한 소음전파 예측모델을 도출하였으며, 이때 ISO 9613-2의 소음 전파 모델을 이용하였다. 고속철도 콘크리트 교 주변 소음도에 대한 예측값을 실제 측정결과와 비교하였으며, 그 결과 본 예측 모델이 비교적 작은 오차를 냄을 확인하였다.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.647-663
• /
• 2023

The investigation of the disc cutter wear prediction has an important guiding role in TBM equipment selection, project planning, and cost forecasting, especially when tunneling in a long-distance rock formations with high strength and high abrasivity. In this study, a comprehensive database of disc cutter wear data, geological properties, and tunneling parameters is obtained from a 1326 m excavated metro tunnel project in leptynite in Shenzhen, China. The failure forms and wear consumption of disc cutters on site are analyzed with emphasis. The results showed that 81% of disc cutters fail due to uniform wear, and other cutters are replaced owing to abnormal wear, especially flat wear of the cutter rings. In addition, it is found that there is a reasonable direct proportional relationship between the uniform wear rate (WR) and the installation radius (R), and the coefficient depends on geological characteristics and tunneling parameters. Thus, a preliminary prediction formula of the uniform wear rate, based on the installation radius of the cutterhead, was established. The correlation between some important geological properties (K_V and UCS) along with some tunneling parameters (F_n and p) and wear rate was discussed using regression analysis methods, and several prediction models for uniform wear rate were developed. Compared with a single variable, the multivariable model shows better prediction ability, and 89% of WR can be accurately estimated. The prediction model has reliability and provides a practical tool for wear prediction of disc cutter under similar hard rock projects with similar geological conditions.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.483-493
• /
• 2013

콘크리트 구조물의 대형화에 따라 고강도를 갖는 재료가 최근에 많이 사용되고 있는 추세이다. 고강도 재료의 사용은 역학적 성질 또는 내구성에 있어서는 장점이 있으나 구조물의 연성 거동에는 불리한 것으로 알려져 있다. 철근콘크리트 부재는 강도뿐만 아니라 적절한 연성이 확보되도록 설계가 되어야 하기 때문에 철근콘크리트 보의 연성을 적절하게 평가할 수 있어야 한다. 본 연구에서는 고강도 재료를 사용한 철근콘크리트 보부재의 곡률연성지수의 예측식을 제시하고자 하였다. 이를 위하여 고강도 콘크리트 및 철근을 사용한 직사각형 단면 RC 보의 모멘트-곡률 관계를 해석적 방법으로 계산하여 다양한 철근 배치 조건하에서 콘크리트 및 철근의 강도가 부재의 휨거동 및 곡률연성지수에 미치는 영향을 분석하였고, 단철근 및 복철근 보에 모두 적용할 수 있는 극한상태에서의 압축철근의 응력을 고려한 새로운 곡률연성지수 예측식을 도출하였다. 제안한 곡률연성지수 예측식은 기존의 식과 비교분석하였으며, 단철근 및 복철근 보에서 예측식에 의해 계산된 곡률연성지수는 수치해석에 의해 얻은 곡률연성지수 값을 오차 범위 9% 내에서 예측하는 것으로 나타났다.

• 대한환경공학회지
• /
• 제28권11호
• /
• pp.1198-1206
• /
• 2006

본 연구는 국내 도시개발 및 택지개발에서 많이 사용되고 있는 국립환경과학원식('99)에 대한 평가 및 검증을 수행하였다. 국립환경과학원식(NIER('99))은 두 변수 사이의 일차적인 관계가 얼마나 강한 정도를 제시하기 위해 결정계수($R^2$)와 표본 Pearson 상관계수(r)를 실측치와 예측치를 토대로 층별로 평가한 결과 1층 92.4%(r=0.96), 3층 38.7%(r=0.66), 5층 42$(r=0.65), 7층 7.5%(r=0.27), 10층 28.4%(r=0.53), 13층 35.6%(r=0.60), 15층 52.7%(r=0.73) 등의 결과를 보였다 선형 회귀를 통해 반응 변수(Y)와 예측 변수(X) 사이의 선형 관계를 조사하여 모형화하고 검증하기 위한 결과 1층을 제외한 모든 층에서 종속변수를 설명할 수 있는 기여율이 60% 이하로 회귀모형의 설명력이 상당히 떨어지는 것이 1.5 m 이상 높이에서 예측식 수립이 필요할 것으로 판단된다. 또한 등분산성을 토대로 잔차(residual) 대 적합지(fitted value)를 선택하여 예측식을 검증한 결과 1층의 경우 이상적 분포로 적합치에서 잔차들이 -5와 5 사이에 분포되어 있지만 1층을 제외한 나머지 층에 대해서는 이분산 혹은 비선형 분포로 잔차들이 -5에서 5사이에 분포되고 있는 것을 확인 할 수 있었다.