• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.637-642
• /
• 2002

Generally, the use of robots in manufacturing industry has been increased during the past decade. GMA(Gas Metal Are) welding is an actively growing area and many new procedures have been developed for use with high strength alloys. One of the basic requirement for welding applications is to study relationships between process parameters and bead geometry. The objective of this paper is to develop a new approach involving the use of neural network and multiple regression methods in the prediction of bead geometry for GMA welding process and to develop an intelligent system that enables the prediction of bead geometry using Rapid Prototyping(RP) in order to employ the robotic GMA welding processes. This system developed using MATLAB/SIMULINK, could be effectively implemented not only for estimating bead geometry, but also employed to monitor and control the bead geometry in real time.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.84-89
• /
• 2007

This research was done on the basis of assumption that there is a relationship between welding parameters and geometry of the back-bead being a gap in arc welding. Multiple regression analysis was used as method for predicting the geometry of the back-bead. The analysis data and the verification data were used for the formation of multiple regression analysis. The method was used to perform the prediction of the back-bead.

• 한국생산제조학회지
• /
• 제20권1호
• /
• pp.74-80
• /
• 2011

In this study, a variety of welding experiments were carried out to optimize root-pass welding process using GMA process. Based on the experimental results, optimal welding conditions were selected after analyzing correlation between welding parameters and back-bead geometry. Then, effectiveness of empirical models developed was compared and analyzed, and optimized empirical models were finally developed for predicting back-bead by analyzing the main effect of each factor which affects back-bead geometry and their influence on interaction. Also, functions proper for expressing the surface of back-bead were selected using diverse quadratic functions, and back-bead geometry was visualized using empirical models developed and quadratic functions.

• Journal of Welding and Joining
• /
• 제23권4호
• /
• pp.41-47
• /
• 2005

Generally, the use of robots in manufacturing industry has been increased during the past decade. GMA(Gas Metal Arc) welding process is an actively Vowing area, and many new procedures have been developed for use with high strength alloys. One of the basic requirement for the automatic welding applications is to investigate relationships between process parameters and bead geometry. The objective of this paper is to develop a new approach involving the use of neural network and multiple regression methods in the prediction of bead geometry for GMA welding process and to develop an intelligent system that visualize bead geometry in order to employ the robotic GMA welding processes. Examples of the simulation for GMA welding process are supplied to demonstrate and verify the proposed system developed using MATLAB. The developed system could be effectively implemented not oかy for estimating bead geometry, but also employed to monitor and control the bead geometry in real time.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.81-87
• /
• 2007

It is important to investigate the relationship between weld process parameters and weld bead geometry for adaptive arc robot welding. However, it is difficult to predict an exact back-bead owing to gap in process of butt welding. In this paper, the quantitative prediction system to specify the relationship external weld conditions and weld bead geometry was developed to get suitable back-bead in butt welding which is widely applied on industrial field. Multiple regression analysis and artificial neural network were used as the research methods. And, the results of two prediction methods were compared and analyzed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.445-446
• /
• 2010

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.169-171
• /
• 2003

In this paper, the prediction for the optimized bead geometry such as bead width, height, penetration and bead area in the Gas Metal Arc (GMA) welding with Taguchi method is presented. An orthogonal array, and the Signal-to-Noise (S/N) ratio employed to investigate the welding quality characteristics together in the selection of process parameters in the GMA welding process, to analyze the effect of each process parameter on the bead geometry and to finally determine the process parameters with the optimal bead geometry. Experimental results fi-om this research show that the Taguchi method provides an effective tool to enhance the accuracy of the optimized bead geometry.

• 한국산학기술학회논문지
• /
• 제9권4호
• /
• pp.871-877
• /
• 2008

Adaptive 아크 로봇 용접을 위한 용접 공정 변수와 용접 부 형상 사이에 상관관계를 조사하는 것은 중요한 일이다. 하지만 맞대기 용접의 공정에 있어 갭으로 인해 정확한 이면비드를 예측하는 것은 어려운 일이다. 본 연구에서는, 먼저 맞대기 용접을 통해 외부 용접 조건과 용접 비드 형상사이 상관관계가 규명되었고, 이를 응용하여 적절한 이면비드를 얻기 위한 개발이 이루어졌고, 이 연구결과는 산업 전 분야에 폭넓게 사용될 수도 있다. 다중회귀분석법이 공정변수 예측을 위한 연구방법으로 적용되었다. 예측방법의 결과들 또한 비교 및 분석이 이루어졌다.

• 한국공작기계학회논문집
• /
• 제17권5호
• /
• pp.30-35
• /
• 2008

As the quality of a weld feint is strongly influenced by process parameters during the welding process, an intelligent algorithms that can predict the bead geometry and shape to accomplish the desired mechanical properties of the weldment should be developed. This paper focuses on the development of mathematical models fur the selection of process parameters and the prediction of bead geometry(bead width, bead height and penetration) in robotic GMA(Gas Metal Arc) welding. Factorial design can be employed as a guide for optimization of process parameters. Three factors were incorporated into the factorial model: arc current, welding voltage and welding speed. A sensitivity analysis has been conducted and compared the relative impact of three process parameters on bead geometry in order to verify the measurement errors on the values of the uncertainty in estimated parameters. The results obtained show that developed mathematical models can be applied to estimate the effectiveness of process parameters for a given bead geometry, and a change of process parameters affects the bead width and bead height more strongly than penetration relatively.

• Journal of Welding and Joining
• /
• 제15권3호
• /
• pp.118-127
• /
• 1997

With the trend towards welding automation and robotization, mathematical models for studying the influence of various variables on the weld bead geometry in gas metal arc (GMA) welding process are required. Partial penetration, single-pass bead-on-plate welds using the GMA welding process were fabricated in 12mm mild steel plates employed four different process variables. Experimental results has been designed to investigate the analytical and empirical formulae, and develop mathematical equations for understanding the relationship between process variables and weld bead geometry. The relationships can be usefully employed not only for open loop process control, but also for adaptive control provided that dynamic sensing of process output is performed.