• Journal of Positioning, Navigation, and Timing
• /
• 제4권4호
• /
• pp.181-186
• /
• 2015

A High-degree Cubature Kalman Filter (CKF) is proposed to deal with the Strapdown Inertial Navigation System (SDINS) alignment problem. In-flight Alignment (IFA) is an effective method to compensate for attitude errors of the navigation system. While providing precise attitude error compensation, however, the external source aided alignment often creates a nonlinear filtering problem caused by a large misalignment angle. Introduced recently, Cubature Kalman Filter is a suitable technique for various nonlinear problems. In this paper, a higher degree CKF is applied to this accuracy-is-everything SDINS IFA problem. The simulation results show that the proposed technique outperformed a traditional nonlinear filter in terms of precision and alignment time.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.258-263
• /
• 2005

The nearest variety of the industrial world requires using the high precision and resolution positioning technology to do a semi-conductor, information field , and measurement field. It is especially important for the positioning technology that makes up a proper controller, is affected by the minimal heat and vibration, and can control a structurally generated non-linear friction factor to determine the efficiency of the system. The paper is to analyze the vibration characteristic according to the speed of linear motor and grasp the dynamic characteristic through the modal test and show the verification of the experimental result and design parameters by using FEM(Finite Element Method). Also, it shows the optimum standard analyzed the acceleration patterns of the moving part that lead to the vibration source in linear motor. It presents the analyzed dynamic of linear motor in compliance with a change of the non-linear factor.

• 한국생산제조학회지
• /
• 제19권3호
• /
• pp.394-401
• /
• 2010

In this article, we investigate a robust friction compensation scheme for the purpose of accomplishing precision positioning performance a servo mechanical system with nonlinear dynamic friction. To estimate the friction state and tackle robustness problem for uncertainty, a RFNN and reconstructed error compensator as well as a robust friction state observer are developed. The asymptotic stability of the series of friction compensation methodologies are verified from the Lyapunov's stability theory. Some simulations and experiments on a servo mechanical system were carried out to evaluate the effectiveness of the proposed control scheme.

• Journal of Ship and Ocean Technology
• /
• 제11권1호
• /
• pp.36-46
• /
• 2007

The maintenance of a ship is essential for safe navigation and hence regular surveys are prescribed according to the rule of classification societies. A hull inspection is generally performed by professional divers, but it takes a long time and the efficiency is low in terms of time and cost. In this research, a ROV(Remotely Operated Vehicle) named as SNU-ROV(Seoul National University-ROV) is developed to replace the conventional inspection method. In this system, the ROV is intended to be used for inspecting ship and harbor because harbor inspection is merging as a safety measure against any possible terror actions. In order to increase the efficiency of inspection, the ROV must be able to measure the exact position of damages. SNU-ROV has a positioning system based on LBL(Long Base Line). In shallow water such as harbor, however, LBL has bad DOP(Dilution of Precision) in the depth direction due to the limited depth. Thus LBL only can not locate the exact depth position. To solve the DOP problem, a pressure sensor is introduced to LBL and a complementary filter is attached by using indirect feedback Kalman filter. Thus developed positioning system is verified by simulation and experiment in towing tank.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 Handout for 2000 Inter. Machine Tool Technical Seminar
• /
• pp.109-115
• /
• 2000

The spindle unit is core parts in high precision machine tools. Diverse static, dynamic and thermal charateristics of spindle unit are needed for special purpose of machine tools. Compromise between those charateristics will be done in concept design phase. High static stiffness at spindle nose may be very important performance for heavy cutting work. High dynamic stiffness is also useful to high precision and high speed machine tools. Improvement of thermal charateristics in spindle lead to high reliability of positioning accuracy. For high speed spindle structure, the design parameter such as, bearing span, diameter, bearing type and arrangement, preload, cooling and lubrication method should be in harmony.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권4호
• /
• pp.399-408
• /
• 2023

In this paper, we propose a solution that enables continuous indoor/outdoor positioning of smartphone users through the integration of Pedestrian Dead Reckoning (PDR) and GPS/WiFi signals. Considering that accurate step detection affects the accuracy of PDR, we propose a Deep Neural Network (DNN)-based technology to distinguish between walking and non-walking signals such as walking in place. Furthermore, in order to integrate PDR with GPS and WiFi signals, a technique is used to select a proper measurement by distinguishing between indoor/outdoor environments based on GPS Dilution of Precision (DOP) information. In addition, we propose a technology to adaptively change the measurement error covariance matrix by detecting measurement outliers that mainly occur in the indoor/outdoor transition section through a residual-based χ² test. It is verified through experiments on a testbed that these technologies significantly improve the performance of PDR and PDR/GPS/WiFi fingerprinting-based integrated pedestrian navigation.

• 로봇학회논문지
• /
• 제12권3호
• /
• pp.350-355
• /
• 2017

UWB (Ultra Wide Band) refers to a system with a bandwidth of over 500 MHz or a bandwidth of 20% of the center frequency. It is robust against channel fading and has a wide signal bandwidth. Using the IR-UWB based ranging system, it is possible to obtain decimeter-level ranging accuracy. Furthermore, IR-UWB system enables acquisition over glass or cement with high resolution. In recent years, IR-UWB-based ranging chipsets have become cheap and popular, and it has become possible to implement positioning systems of several tens of centimeters. The system can be configured as one-way ranging (OWR) positioning system for fast ranging and TWR (two-way ranging) positioning system for cheap and robust ranging. On the other hand, the ranging based positioning system has a limitation on the number of terminals for localization because it takes time to perform a communication procedure to perform ranging. To overcome this problem, code multiplexing and channel multiplexing are performed. However, errors occur in measurement due to interference between channels and code, multipath, and so on. The measurement filtering is used to reduce the measurement error, but more fundamentally, techniques for removing these measurements should be studied. First, the TWR based positioning was analyzed from a stochastic point of view and the effects of outlier measurements were summarized. The positioning algorithm for analytically identifying and removing single outlier is summarized and extended to three dimensions. Through the simulation, we have verified the algorithm to detect and remove single outliers.

• 한국측량학회지
• /
• 제37권3호
• /
• pp.101-108
• /
• 2019

최근 컴퓨터 처리 속도의 향상과 영상 처리 기술의 발달로 인해 카메라에서 획득하는 정보를 기존의 GNSS(Global Navigation Satellite System), 추측 항법 기반의 측위 기술과 결합하여 안정적인 위치를 결정하기 위한 연구가 활발히 진행 중이다. 기존 연구에서는 단안 카메라를 이용한 연구가 주로 수행되었으나 이 경우 관심 객체의 절대좌표가 구축이 되어 있어야 한다는 한계점이 있다. 이러한 한계를 극복하기 위해 본 연구에서는 스테레오 영상으로부터 삼각측량법을 적용하여 카메라와 관심 객체간 거리를 추정하는 비전 기반 측위 보조 알고리즘을 개발하고 성능 분석을 수행하였다. 또한, 추정된 거리와 카메라 영상 획득 간격을 이용해 상대적인 속도를 계산하고 이를 기존에 개발된 GNSS/이동체 내부 센서 기반 측위 알고리즘과 결합하여 통합 측위 알고리즘을 구현하였다. 실제 주행 자료를 기반으로 통합측위 알고리즘에 대한 성능을 분석한 결과 기존에 개발된 GNSS/이동체 내부 센서 기반 측위 알고리즘에 비해 속도 정보를 항법해 보정에 활용하였을 때 약 4%의 미미한 위치 정확도 향상 효과를 확인하였다. 이는 영상으로부터 추정된 속도 정보의 정밀도가 낮고, 터널 등을 지날 때는 영상으로부터 적절한 정보를 추출할 수 없다는 한계가 있어 이를 보완한 추가 연구가 필요하다고 판단된다.

• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.788-797
• /
• 2011

This paper analyzes the accuracy on the approach and landing of aircraft to an airport through comparison with airbase Precision Approach Radar and aircraft track data of DGPS equipped in aircraft. The proposed analysis result could be a basis for verifying the possibility that DGPS can be utilized in Airbase precision approach and landing. Position identification capability of widely used commercial DGPS is fairly accurate on latitude and longitude, while there is a slight error for being used in an airbase accurate approach and landing of Category I precision when it comes to altitude. Thus, we tested accuracy by analyzing actual flight track data of high performance aircraft to verify the accuracy of the airbase approach and landing using DGPS. Through the research, we developed instrumentation to compare PAR track data with DGPS track data, which can be used in reducing the number of PAR verification Flight utilizing it as a system measuring PAR accuracy at PAR installation phase.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.29-37
• /
• 1999

This paper involves the "on-line" measurement of burrs using a capacitance sensor. A non-contact capacitance gauging sensor is attached to an ultra precision milling machine which was used as a positioning system The setup is used to measure burr profiles along machined workpiece edges. Experimental procedures and results as well as the basic theoretical principles of the capacitance sensor and specifications of related equipment are presented. The proposed scheme is shown to be accurate easy to setup and with minor modifications readily applicable to automatic deburring processes.processes.