• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.80-85
• /
• 2012

The ultrasonic cutting method is which cutting by applying high frequency vibrational energy into specific area at constant pressure. Ultrasonic cutting is consisted of power supply, transducer, booster and cutting tool. Precise designing is required since each part's shape, length and mass can affect driving frequency and vibration mode. This paper focused to cutting tool design, its length L was set by calculating vibration equation. And the value of the shape parameter a was diversified as the integral multiple and the result of 40,189Hz the analysis of Modal was shown in the length 30mm of the result of performance b in the 11th mode Also by performing harmonic response analysis, the frequency response result was 40,189Hz, which was similar to modal analysis result.

• 한국공작기계학회논문집
• /
• 제15권2호
• /
• pp.73-80
• /
• 2006

This paper describes a analysis on the chip thickness model required for cutting force simulation in ball-end milling. In milling, cutting forces are obtained by multiplying chip area to specific cutting forces in each cutting instance. Specific cutting forces are one of the important factors for cutting force predication and have unique value according to workpiece materials. Chip area in two dimensional cutting is simply calculated using depth of cut and feed, but not simply obtained in three dimensional cutting such as milling due to complex cutting mechanics. In ball-end milling, machining is almost performed in the ball part of the cutter and tool radius is varied along contact point of the cutter and workpiece. In result, the cutting speed and the effective helix angle are changed according to length from the tool tip. In this study, for chip thickness model analysis, tool and chip geometry are analyzed and then the definition of chip thickness and estimation method are described. The resulted of analysis are verified by compared with geometrical simulation and other research. The proposed chip thickness model is more precise.

• 한국건설관리학회논문집
• /
• 제24권5호
• /
• pp.52-62
• /
• 2023

본 연구의 목적은 정착 길이, 표준 후크 및 이음 길이와 같은 관련 규정을 준수하면서 슬래브 철근의 정확한 절단 길이를 산출하는 자동화된 알고리즘을 제안하는 것이다. 제안된 알고리즘은 일반적으로 외주를 통해 수작업으로 진행하던 기존 철근 물량 산출 프로세스를 개선하는 것을 목표로 한다. 입찰 단계부터 정확한 철근 수량 데이터를 BBS(Bar Bending Schedule) 수준으로 제공함으로써 물량 산출의 불확실성을 제거하고 외부 의존도를 낮출 수 있다. 또한, 알고리즘을 통해 정확한 물량을 조기에 산출하는 경우 건설사는 경쟁력 있고 최적화된 입찰을 미리 준비할 수 있어 계약 협상 시 이익률을 높일 수 있다. 제안된 알고리즘은 견적, 예산, BBS 생성 등 다양한 프로세스에서 중복되는 업무를 간소화할 뿐만 아니라 계약 후 구조 도면 변경에도 유연하게 대처할 수 있다. 특히, 제안된 알고리즘을 BIM과 결합하는 경우 시공 초기 단계에서 BIM을 적용할 때 발생하는 기술적 문제를 해결할 수 있으며, REVIT 기반 패밀리 파일로 구축된 알고리즘의 수식과 형상 코드는 실무에서 상당한 시간과 인력 절감에 기여한다.

• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.46-53
• /
• 1996

Micro drilling is one of the most important machining types and its necessity becomes more and more increasing in the whole field of industry. Micro drilling, however, has few the case of practical application, because it requests high techniques : manufacturing micro drill, treating chip, producting precise hole shape and progressing machining effeciency. Micro drilling has a technical problem: drill breakage from the lack of drill rigdity and the interuption of chip. It is, therefore, essential to select the proper cutting conditions and the step fed for the method solving the lack of rigidity and the interruption of chip. Especially, step feed is very efficient to avoid the breakage of drill, but bring about reducing of cutting efficiency. The study on step feed must be requested more than the present in the near future. The purpose of this paper is to investigate experimentally about cutting conditions which affect on tools and round errors and to estimate about the effect of step feed as well as optimal step feed size to solve the breakage of drill.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.8-13
• /
• 2019

As increasing demand for precise machining in advanced disciplines, especially in semi-conductor, aeronautical and automotive industries, the magnetic abrasive deburring(MAD) which is able to eliminate micro-sized burr on complex surface in less time has drawn the attention in the last decades. However, the performance of MAD is subject to shape and size of a tool. Therefore, this study aim to identify deburring behavior of MAD in U-type flow channel by measuring the length rate of burr removal in radial distance of the cylindrical tool under four process factors. In order to evaluate the deburring effect of MAD on the surface, finishing regions are divided based on center of the circular cutting tool. As a results, it was defined that the amount of burr removal in a downward direction moving toward flow channel from the top surface was higher than upward direction. This is because the magnetic abrasives were detached from magnetic lines of force due to geometrical shape.

• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.104-111
• /
• 2001

The toolpath generation for 3D shaped parts with adaptive isocurve is more precise than existing methods, and the machining time can be reduced. Whether adaptive isocurves are inserted or not is determined by the surface shape, but the number of curves inserted and the total path length vary with initial step lengths. In this paper, therefore, by introducing the concept of the scale factor into the initial path interval ; toolpath was regenerated.

• 대한소아치과학회지
• /
• 제26권1호
• /
• pp.119-125
• /
• 1999

Air turbine handpiece를 사용하여 치간 법랑질을 삭제하는 Air-rotor stripping 술식은 악궁확장이나 발치 술식에 대한 대체방안으로써 arch length discrepancy를 해결할 수 있는 효과적인 접근법으로 사료된다.