• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.89-96
• /
• 2004

Hydroxyapatite powder were synthesized by precipitation method, varying pH, and reaction temperature. The powders were heated at 1,200$^{\circ}{\cdots}$ and 1,300$^{\circ}{\cdots}$ for fabrication of dental prosthesis. The results are as follows: Synthesized powder showed the smallest particle in size, under the conditions of pH 11 and reaction temperature 37$^{\circ}{\cdots}$. The hydroxyapatite was partially converted to $\alpha,\;\beta$-TCP at 1,200$^{\circ}{\cdots}$ and 1,300$^{\circ}{\cdots}$. Mechanical strength of sample was affected by such powder preparation conditions as pH and reaction temperature and sintering temperature. The mechanical strength of sample prepared under the same conditions was increased with increasing pH, reaction temperature and sintering temperature.

• 미생물학회지
• /
• 제12권4호
• /
• pp.180-187
• /
• 1974

Of the Asp. spp. isolated by the Institute of Applied Microbiology, Kon-Kuk University, 7 strains were selected for the study of the immunological differencences among them using gel precipitation test. The strains were the following types : 1 type of flavus and 2 types of oryzae were isolated from Meju ; 1 type of flavus from Nuruk ; and each one type of flavus, parasiticus and oryzae from Kokja.Asp.flavus from ATCC, Asp. parasiticus nad Asp. niger NRRL strains were also used in the study as a standard. From this study, several points can be raised ; 1) There was no common antigenic property between Asp. niger and Asp. flavus, because of no formation of reaction line. Therefore, all strains could be easily distinguished. 2) There was common antigenic property, that is, the formation of reaction line between Asp. flavus and Asp. parasticus. Accordingly two strains could not be easily distinguished by the gel precipitation test. 3) Each type of oryzae, parasiticus and flavus of Asp. flavus group had common antigen one another as well as specific antigens only in the difference of the reaction lines, so they could be easily identified in the gel precipitation test. 4) Each isolated strain from Meju and Nuruk appeared to be identical. 5) It was shown that the gel precipitation test of serological methods was very useful for the classification of Asp. spp.

• 대한금속재료학회지
• /
• 제46권4호
• /
• pp.233-240
• /
• 2008

The reductive precipitation of platinum and palladium in hydrochloric acid solution using hydrazine as a reducing agent was investigated. The reductive precipitation ratios of platinum and palladium increased when increasing the stoichiometric ratio for reducing agent, precipitation time, and pH. The precipitation ratio of platinum was much lower than that of palladium. This is the reason the reaction rate of $PtCl{_6}^{2-}{\rightarrow}PtCl{_4}^{2-}$ at the reduction reaction step of $PtCl{_6}^{2-}{\rightarrow}PtCl{_4}^{2-}{\rightarrow}Pt$ is very slow. The purity of platinum precipitated was very affected by metallic impurities, while it was possible to precipitate the high purity palladium since the precipitation rate of palladium was relatively fast. At the pH of 1.3, the precipitation temperature of $25^{\circ}C$, and the addition amounts of the hydrazine of 10 and 1.75 times the stoichiometric ratio, the reductive precipitation ratios of platinum and palladium from their hydrochloric acid solutions containing 2,000 ppm were 98.5% and 99.9% in 30 min, respectively.

• 한국재료학회지
• /
• 제26권5호
• /
• pp.235-240
• /
• 2016

Appropriate thermo-mechanical properties of nickel-based superalloys are achieved by heat treatment, which induces precipitation and solid solution hardening; thus, information on the temperature ranges of precipitation and dissolution of the precipitates is essential for the determination of the heat treatment condition. In this study, thermal analyses of nickel-based superalloys were performed by differential scanning calorimetry method under conditions of various heating rates of 5, 10, 20, or 40K/min in a temperature range of 298~1573K. Precipitation and dissolution temperatures were determined by measuring peak temperatures, constructing trend lines, and extrapolating those lines to the zero heating rate to find the exact temperature under isothermal condition. Determined temperatures for the precipitation reactions were 813, 952, and 1062K. Determined onset, peak, and offset temperatures of the first dissolution reaction were 1302, 1388, and 1406K, respectively, and those values of the second dissolution reaction were 1405, 1414, and 1462K. Determined solvus temperature was 1462K. The study showed that it was possible to use a simple method to obtain accurate phase transition temperatures under isothermal condition.

• 한국인쇄학회지
• /
• 제16권2호
• /
• pp.11-22
• /
• 1998

For the purpose of preparation of monodispersed spherical zinc oxide fine particles, an experimental research on the preparation of zinc oxide particles from zinc salts solutions by high temperature precipitation reaction was performed. Zinc oxide particles were precipitated from all the precipitation solutions tested if the precipitation temperature was higher than 60$^{\circ}$. As the precipitation temperature Increased until 80$^{\circ}$, the average particle diameter of zinc oxide particles decreased and the narrower particle size distribution were obtained. Spherical zinc oxide fine particles with relatively narrow particle size distribution were precipitated from the ZnSO$_4$ solutions with NaOH as precipitant. Final pH of precipitation solution had an effect on the amount of zinc oxide precipitated, but had no effect on the their particle size or size distribution.

• 자원리싸이클링
• /
• 제14권6호
• /
• pp.16-20
• /
• 2005

구리, 니켈 그리고 코발트를 함유한 용액으로부터 구리를 선택적으로 분리하기 위하여 $Na_{2}S$를 첨가하여 구리를 CuS로 침전시키는 연구를 행하였다. 구리의 침전율은 용액의 pH가 높을수록, 첨가한 $Na_{2}S$의 양이 많을수록,농도가 낮을수록, 반응온도와 반응시간이 증가할수록 증가하였다. pH 1, $20\%\;Na_{2}S$ 첨가량이 구리의 3 당량비, 온도 $25^{\circ}C$ 그리고 반응시간 30분에서 구리의 침전율은 $94.1\%$이었으며 니켈과 코발트도 각각 $4.3\%$와 $4.5\%$가 침전되었다. 즉 일부 니켈과 코발트 이온이 같이 공침되기 때문에 정량적으로 구리만을 침전, 분리하는 것은 가능하지 않았다.

• 한국세라믹학회지
• /
• 제33권5호
• /
• pp.495-506
• /
• 1996

Monodispersed colloidaly yttria(Y2O3) can be used in a variety of applications such as phosphors. IR transparent materials and fine ceramics. For preparing monodispersed yttria homogeneous precipitation has been regarded as a fovorable method that is monodispersed yttria can be obtained through calcining monodispersed colloidal compound of yttrium (eg:Y(OH)CO3.nH2O)which can be prepared by homogeneous precipitation with urea. It is however still required to find out the quantitative effects of important variables of precipitation such as concentration of yttrium and urea reaction temperature and initial pH of reactant even though homogeneous precipitation of Y3+ with urea has been studied extensively. Among the effects of these variables we investiga-ted 1) the effect of yttrium concentration on the shape and size of precipitate and the reation rate 2) range of yttrium concentration required to make monodispersed colloidal particles 3) the reason for limited concentra-tion range of yttrium and 4) the effect of ultrasonic radiation on the limited concentration.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.630-635
• /
• 2011

Bismuth vanadate($BiVO_4$) with monoclinic phase as photocatalyst under visible light is synthesized by precipitation reaction in hot water. Properties such as crystal phase, particle morphology and visual light absorbance as well as the effects of thermal treatment for $BiVO_4$ powders are investigated. $BiVO_4$ powders with both single monoclinic phase and 0.2 ${\mu}m$ in particle size are synthesized when precipitate is stirred in water for 5 h at 95$^{\circ}C$. Well-developed monoclinic phase and light absorption property under 535 nm are observed as a result of thermal treatment for 1 h at 300$^{\circ}C$ after precipitation reaction in water for 5 h at 95$^{\circ}C$. Degradation of monoclinic crystal is found in firing above 350$^{\circ}C$, and particle growth is occurred in firing above 550$^{\circ}C$.

• 한국지반환경공학회 논문집
• /
• 제13권5호
• /
• pp.51-57
• /
• 2012

본 연구에서는 친환경적인 그라우트재의 개발을 위하여 연약지반에 대한 바이오그라우트 가능성을 확인하고, Bacillus Pasteurii 균을 이용하여 탄산칼슘 침전 효과를 분석하였다. 연약지반에 미생물의 탄산칼슘 침전을 이용하여 바이오그라우트에 미치는 영향을 알아보기 위해 4가지 시료의 조건(멸균 시료, 비멸균 시료, 반응용액과 미생물용액의 선처리 혼합시료, 반응용액과 미생물용액의 후처리 혼합시료)으로 실험되었다. 전자현미경(SEM), EDX와 X선 분석 회절기(XRD)를 이용하여 연약지반 시료의 분석을 수행하였고, 이러한 연구결과를 바탕으로 탄산칼슘 침전을 이용한 미생물 처리 공법은 바이오그라우트의 특성을 개선하였다.

• 한국세라믹학회지
• /
• 제36권7호
• /
• pp.698-704
• /
• 1999

Li rich Li1+xMn2-xO4(x=0.07) spinel powders were prepared by an oxalate precipitation of wet chemical methods at temperature lower than $600^{\circ}C$. The FTIR results showed that the powders prepared at $600^{\circ}C$ had high degree of crystal quality comparing with the spinel powders prepared by solid state reaction at 75$0^{\circ}C$ which was the lowest synthesis temperature of the solid state reaction method. The particle size of powders prepared by the oxalate precipitation at $600^{\circ}C$ was smaller than 0.2${\mu}{\textrm}{m}$ and the specific surface area was 11.01 m2/g A heat treatment over 90$0^{\circ}C$ formed second phase in the precipitates. It was shown that there were phase transitions at temperatures. T1,T2 and T2. The transitions involved weight loss and gain during heating and cooling. The low temperature synthesis below $600^{\circ}C$ avoided the second phase formation and the prepared powders showed improved compositional and physical properties for secondary lithium battery applications.