• The Korean Journal of Mycology
• /
• v.15 no.3
• /
• pp.175-182
• /
• 1987

A raw starch saccharifying enzyme from Aspergillus sp. SN-871 was purified by ammonium sulfate precipitation, DEAE-cellulose column chromatography, CM-Sephadex C-50 column chromatography and Sephadex G-75 gel filtration. The specific activity of purified enzyme was 18 fold and the yeild was 13.40%. The molecular weight of the purified enzyme was estimated as approximately 40,000 dalton by the method of Andrews gel filtration. The optimum pH and temperature for this enzyme were found to be 4 and $40^{\circ}C$, respectively and the stable range of pH was 2 to 5. The enzyme was themostable at below $60^{\circ}C$ and inactivated at $70^{\circ}C$. It showed a tendency to increase the enzyme activity under the presence of 0.01 M $BaCl_2$, but under 0.01 M$Pb(NO_3)_2$, $AgSO_4$, and $K_3Fe(CN)_6$ and citric acid etc. inhibited it completely. The substrate specifity of enzyme showed a tendency to increase the enzyme activity under addition of dextrin and glycogen, but under saccharose inhibited it. COD removal rate of Aspergillus sp. SN-871 was approximately 67 to 68%.

• Korean Journal of Materials Research
• /
• v.22 no.5
• /
• pp.253-258
• /
• 2012

Activated magnetite ($Fe_3O_{4-{\delta}}$) was applied to reducing $CO_2$ gas emissions to avoid greenhouse effects. Wet and dry methods were developed as a $CO_2$ removal process. One of the typical dry methods is $CO_2$ decomposition using activated magnetite ($Fe_3O_{4-{\delta}}$). Generally, $Fe_3O_{4-{\delta}}$ is manufactured by reduction of $Fe_3O_4$ by $H_2$ gas. This process has an explosion risk. Therefore, a non-explosive process to make $Fe_3O_{4-{\delta}}$ was studied using $FeC_2O_4{\cdot}2H_2O$ and $N_2$. $FeSO_4{\cdot}7H_2O$ and $(NH_4)_2C_2O_4{\cdot}H_2O$ were used as starting materials. So, ${\alpha}-FeC_2O_4{\cdot}2H_2O$ was synthesized by precipitation method. During the calcination process, $FeC_2O_4{\cdot}2H_2O$ was decomposed to $Fe_3O_4$, CO, and $CO_2$. The specific surface area of the activated magnetite varied with the calcination temperature from 15.43 $m^2/g$ to 9.32 $m^2/g$. The densities of $FeC_2O_4{\cdot}2H_2O$ and $Fe_3O_4$ were 2.28 g/$cm^3$ and 5.2 g/$cm^3$, respectively. Also, the $Fe_3O_4$ was reduced to $Fe_3O_{4-{\delta}}$ by CO. From the TGA results in air of the specimen that was calcined at $450^{\circ}C$ for three hours in $N_2$ atmosphere, the ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was estimated. The ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was 0.3170 when the sample was heat treated at $400^{\circ}C$ for 3 hours and 0.6583 when the sample was heat treated at $450^{\circ}C$ for 3 hours. $Fe_3O_{4-{\delta}}$ was oxidized to $Fe_3O_4$ when $Fe_3O_{4-{\delta}}$ was reacted with $CO_2$ because $CO_2$ is decomposed to C and $O_2$.

• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.235-242
• /
• 1999

It is impossible to measure the fraction of the precipitates which are neither plenty nor distiguishable on micrographs, using point counting method or image analyzer. In this study, phase fraction of sigma, carbide and boride which are important to mechanical properties of Ni base superalloy Udimet 720 has been measured using a quantitative X-ray diffraction technique combined with electrochemical extraction. The alloys had been exposed at $800^{\circ}C$ for various times up to 3000 hours to have a variation of the amount of the minor precipitates. The amount of sigma had increased exponentially with increasing exposure time up to 3000 hours before saturation. It can be argued that the finishing point of precipitation is around 5000 hours and maximum amount of sigma to be produced is about 5% in weight. The amounts of $M_{23}C_6$ and $M_3B_2$ were maintained constant at the level of 0.1~0.5% in weight, regardless of exposure time.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.239-247
• /
• 2005

In this study, an experimental study on the sorption properties of uranium(VI) onto bentonite colloids generated from a domestic calcium bentonite (called as Gyeongju bentonite). Gyeongju bentonite has been considered as a potential candidate buffer material in the Korean disposal concept for high-level radioactive wastes. The size and concentration of the bentonite colloids used in the sorption experiment were measured by a filtration method. The result showed that the concentration of the synthesized bentonite colloid suspension was 5100ppm and the size of the most of bentonite colloids(over $98\%$) was in the range of 200-450nm in diameter. The amount of uranium lost by the sorption onto bottle walls, by precipitation, and by ultrafiltration or colloid formation was analyzed by carrying out some blank tests. The loss of uranium by the ultrafiltration was significant in the lower ionic strength(i.e., in the case of 0.001M $NaClO_4$) due to the cationic sorption effect onto the ultrafilter by a surface charge reversion. The distribution coefficient (or pseudo-colloid formation constant) for the sorption of uranium(VI) onto bentonite colloids was $10^4^{\sim}10^6$ mL/g depending upon pH and the distribution coefficient was highest in the neutral pH around 6.5.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.3
• /
• pp.261-269
• /
• 1989

Agricultural activities in Chejudo require more specialized weather services in this region. The meteorological information available from the Korea Meteorological Service (KMS) is limited in its areal coverage because the KMS stations are located along the narrow band of coastal area. topoclimatological technique which makes use of empirical relationships between the topography and the weather can be applied to produce reasonable estimates of the climatic variables such as air temperature and precipitation over remote land area where routine observations are rare. Presentation of these estimates in a from of fine-mesh grid map can also be helpful to upgrade the quality of weather services in this region. Altitude values of the 250 m grid points were read from a 1: 25000 topographic map and the mean altitude, the mean slope, and the aspect of the slope were determined for each 1 km$^2$ land area from these altitude data. Daily minimum air temperature data were collected from 18 points in Chejudo during the winter period from November 1987 to February 1988. The data were grouped into 3 sets based on synoptic pressure pattern. Departures from the KMS observations were regressed to the topographical variables to delineate empirical relationships between the local minimum temperature under specific pressure patterns and the site topography. The selected regression equations were used to calculate the daily minimum temperature for each 1 km$^2$ land area under the specific pressure patterns. The outputs were presented in a fine-mesh grid map with a 6-level contour capability.

• The Journal of Engineering Geology
• /
• v.21 no.4
• /
• pp.381-391
• /
• 2011

Weathering can reduce rock strength and eventually affect the structural stability of a rock mass, which is important in the field of engineering geology. Several methods have been developed to evaluate the degree of weathering, including the chemical weathering index. In this study, we analyzed the weathering degree and characteristics of microtextures and pores in crystalline rocks (gneiss and granites) based on petrographic observations, the chemical weathering index, mineralogy by XRD, microtextural analysis by SEM/EDS, measurements of pore size and surface area by the BET method, and microporosity by X-ray CT. The formation of secondary minerals and microtexture in gneiss and granitic rocks are assumed to be affected by complex processes such as dissolution, precipitation, and fracturing. Hence, it is clear that some chemical weathering indices that are based solely on whole-rock chemistry (e.g., CIA and CWI) are unable to provide reliable assessments of the degree of weathering. Great care is needed to evaluate the degree of chemical weathering, including an understanding of the mineralogy and microtexture of the rock mass, as well as the characteristics of micropores.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1164-1173
• /
• 1996

Treating methods and characteristics of waste from a nuclear fuel powder conversion plant were studied. To recovery or treat a trace uranium in liquid waste, the ammonium uranyl carbonate(AUC) filtrate must be heated for $CO_2$ expelling, essentially. Uranium content of final treated waste solution from fuel powder processes for a heavy water reactor(HWR) could be lowered to 1 ppm by the lime treatment after the ammonium di-uranate(ADU) precipitation by simple heating. Otherwise, in case of the waste from fuel powder processes for a pressurized light water reactor(PWR), it is result in 0.8 ppm as a form of uranium peroxide such as $UO_4{\cdot}2NH_4F$ compounds. Optimum condition was found at $101^{\circ}C$ by the simple heating method in case of HWR powder process waste. And in case of PWR powder process waste, optimum condition could be obtained by precipitating with adding hydrogen peroxide and adjusting at pH 9.5 with ammonia gas at $60^{\circ}C$ after heating the waste In order to expelling $CO_2$. As the characteristics of recovered uranium compounds, median particle size of ADU was increased with pH increasing in case of HWP waste. Also, in case of uranium proxide compound recovered from PWR waste, the property of $U_3O_8$ power obtained after thermal treatment in air atmosphere was similar to that of the powder prepared from AUC conversion plant.

• The Journal of the Korean Society for Microbiology
• /
• v.3 no.1
• /
• pp.15-23
• /
• 1968

For the effective control of Syphilis, many investigators have developed a more rapid, simple and economical screening serological test which is adequately sensitive and specific. To fulfill the requirements of a more rapid serologic test for syphlis, a substitute for the conventional serum specimen was needed since considerable time and labor are involved in the processing of blood to serum. Burdon suggested the use of plasma in the serologic tests for syphilis as a substitute for serum. He noticed that plasma was more sensitive than serum in the Kline and Kahn tests, and attributed this to the presence of more antibody-like substance, "reagin" in plasma than in serum. However, to make plasma sufficiently sensitive, it was necessary to inactivate plasma by heating at a temperature of $56^{\circ}C$ for about 30 minutes. Heating of plasma resulted in the precipitation of fibrinogen which made centrifugation necessary to obtain dear plasma. Since the chief disadvantage to the use of unheated plasma(or serum) was a reduction in sensitivity of results-which probably was due to a labile factor such as complement-Portnoy et al began to consider rapid chemical methods of inactivation of plasma(or serum). They experienced that choline chloirde was shown to be anticomplementary which suggested its use as an inactivating agent for unheated plasma(or serum). In 1959 Portnoy et al reported the Rapid Plasma Reagin(RPR) Test for syphilis which is a more rapid, economical and simple. But still this test has many disadvantages as a rapid performing, field and office procedure, because it requires the usual laboratory equipments such as centrifuge, rotating machine, microscope etc. To substitute these disadvantages of the RPR test, in 1962, Portnoy et al developed the Rapid Plasma Reagin(RPR) card test for syphilis, which has the following advantages: a) Simplicity and rapidity of performance, b) Requires no laboratory equipments, c) Stable antigen suspension, d) Adequate sensitivity and specificity. This RPR card test can be used as a rapidly performing and screening test in field investigation, outpatient clinics, small laboratories and hospitals doing limited syphilis serology, and predonor in blood bank. Private clinic which has limited laboratory equipment and technic for syphilis serology can also use this RPR card test as a tool in the rapid diagnosis of syphilis. It was thought that this RPR card test is a useful tool in Korea for private physician and mass survey for syphilis diagnosis. But Portnoy patented the reagents needed for the performing the RPR card test. Therefore authors developed newly the reagents and according to Portnoy's method evaluated the newly developed. RPR card test compared with the VDRL, Kolmer CF, and RPCF tests. The RPR card and VDRL tests were performed plasma and serum from the total 1,132 cases. Among these 1,131 cases, 521 were syphilis suspected laboratory specimens, and 611 were syphilis unsuspected healthy young men. After screening with these two tests, the RPR card and VDRL tests, reactive specimens to the above one or both tests were retested by the Kolmer CF and RPCF tests.

• Korean journal of food and cookery science
• /
• v.15 no.2
• /
• pp.158-162
• /
• 1999

A beverage was manufactured with onion extract for which onions were boiled with water and filtered. The concentration of cyclodextrin was studied to improve its quality in manufacturing the onion beverage and its antioxidative and antifatigue effect was investigated in vitro or in vivo. One percent of cyclodextrin was optimum concentration to prevent precipitation and to remove pungent taste and keep mild taste during storage at room temperature and 40$^{\circ}C$. Water extract of onion, used to manufacture onion beverage shown significant difference in antioxidative effect based on peroxide value and thiocyanate method. For the study of antifatigue, swimming performance of mice which fed with onion beverage and water extracts of onion and garlic for 2 weeks was investigated. The mice fed with onion beverage swam longer than those fed with water extract of onion and garlic.

• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.86-91
• /
• 1995

In order to expand the utility of alginic acid in the food industry, we have investigated to prepare low viscous alginic acid using a method for degradation of alginic acid with the enzyme system of Vibrio sp. AL-145. The enzyme showed maximum activity at pH 8.0 and $37^{\circ}C$, and was stable in the pH range 7.5 to 8.5 and at temperature up to $30^{\circ}C$, and 0.5M NaCl needed for the enzyme activity. The viscosity of alginic acid decreased with the reaction time courses regardless of alginic acid and enzyme concentration, and 90% of viscosity decreased with 60 min of reaction time, but the changes of reducing sugar not exhibited. The soluble concentration of partially degradated alginic acid(PDA) in water was about 10%(w/v), and adsorption capacity of $Ca^{2+}$ ion increased with increasing the concentration of PDA. The alcohol concentration on precipitation of PDA was higher than Na-alginic acid.