• Journal of Ginseng Research
• /
• v.18 no.2
• /
• pp.122-127
• /
• 1994

Red ginseng extracts accounted for the major precipitating material in red ginseng drink prepared with various components and pasteuralized at $80^{\circ}C$ for 30 min. Precipitates in red ginseng extracts isolated by centrifugation were investigated for its chemical components and physicochemical properties. Recovery of precipitates in red ginseng extracts was 1.59% on a dry weight basis. Precipitates were composed of starch (71.47%), crude protein (21.75%), pectin (1.70%), polyphenol (2.97%) and calcium (3.83 ppm) but ginsenosides were not present. Absorption peak at 285 nm which appeared in red ginseng extracts was absent in the precipitates. pH and Hunter L value of the precipitates decreased, while Hunter a and b values increased in contrast to red ginseng extracts. Precipitates were solubilized to some extent in polar solvent. The shape of precipitate particle was round, sciral or irregular square. Particle size of precipitates varied from 0.17 $\mu\textrm{m}$ to 41.3 $\mu\textrm{m}$ in length.

• Economic and Environmental Geology
• /
• v.52 no.1
• /
• pp.13-28
• /
• 2019

This study analyzed precipitation environment, heavy metal contamination, and mineral composition of white, reddish brown and mixed precipitates occurring at the Osip stream drainage, Gangwondo. Furthermore, spectral characteristics of the precipitates associated with heavy metal contamination and mineral composition was investigated based on spectroscopic analysis. The pH range of the precipitates was 4.43-6.91 for white precipitates, 7.74-7.94 for reddish brown precipitates, and 7.59-7.9 for the mixed precipitates, respectively. XRF analysis revealed that these precipitates were contaminated with Ni, Cu, Zn, and As. The white precipitates showed high Al concentration compared to reddish brown precipitates as much as 3.3 times, and the reddish brown precipitates showed high Fe concentration compared to white precipitates as much as 15 times. XRD analysis identified that the mineral composition of the white participates was aluminocoquimbite, gibbsite, quartz, saponite, and illite, and that of reddish brown precipitates was aluminum isopropoxide, kaolinite, goethite, dolomite, pyrophyllite, magnetite, quartz, calcite, pyrope. The mineral composition of the mixed precipitates was quartz, albite, and calcite. The spectral characteristics of the precipitates was manifested by gibbsite, saponite, illite for white precipitates, goethite, kaolinite, pyrophyllite for reddish brown precipitates, and albite for the mixed precipitates, respectively. The spectral reflectance of the precipitates decreased with increase in heavy metal contamination, and absorption depth of the precipitates indicated that the heavy metal ions were adsorbed to saponite and illite for white precipitates, and goethite and magnetite for reddish brown precipitates.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.10
• /
• pp.925-929
• /
• 1996

Uranyl hydrolysis precipitates were obtained by increasing pH value of aqueous uranyl solution in the range of neutral to alkaline pH value and their phase transformation during the solubility experiment under various conditions has been examined. The precipitates formed in the hydrolysis reaction of uranyl ion had a layered structure such as a meta-schoepite phase, a schoepite structure, or a mixed phase of meta-schoepite and schoepite. Phase transformation between them was strongly dependent on the pH value at which the precipitate was formed. The distance between the layers in meta-schoepite or schoepite phase was ∼7.35 Å, and it was increased with the pH value at which the precipitate was synthesized as well as the pH values of the aqueous solution. The phase transformation from a meta-schoepite to schoepite was fast for the precipitates formed at low pH values, however, it was not the case for the precipitates formed at high pH values. A small difference of pH value in aqueous solution gave a great change on its solubilities near pH 9.7, because a layered structure of the precipitates became amorphous above that pH value. Greater solubility for the precipitate formed at higher pH value can be explained from the fact that the precipitates formed at low pH value had a better crystallinity and also that the precipitates formed at higher pH value has a slower rate of crystallization.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.1
• /
• pp.31-39
• /
• 1985

Using the tensor elastic Green functions an exact integral equation is formulated for two anisotropic precipitates embedded in an infinite anisotropic matrix; the matrix is subjected to an applied strain field or the precipitates undergo a stress-free transformation strain. This equation is reduced to an infinite system of algebraic equations by expanding the strains in Taylor series about the two points within each precipitate, and an approximation of the strain distributions within the two spherical precipitates is obtained by truncating the higher order terms. Since the present method requires no symmetry conditio between the two shperical precipitates, it is possible to obtain the strain distribution within the precipitates when the elastic constants and/or the sizes of the precipitates are different each other. The strains are expanded about arbitrary points, giving more accurate distributions of the strains than those presented elsewhere. The present method can be directly estended to the case of more than two spherical precipitates.

• Journal of Welding and Joining
• /
• v.20 no.5
• /
• pp.78-86
• /
• 2002

A metallurgical model for the prediction of prior austenite grain size considering the dissolution kinetics of M$_3$C precipitates at the heat affected zone of SA508-cl.3 was proposed. The isothermal kinetics of grain growth and dissolution were respectively described by well-known equation, $dD/dT=M({\Delta}F_{eff})^M$ and Whelan's analytical model. The isothermal grain growth experiments were carried out for measure the kinetic parameters of grain growth. The precipitates of the base metal and the specimens exposed to thermal cycle were examined by TEM-carbon extraction replica method. The model was assessed by the comparison of BUE simulation experiments and showed good consistencies. However, there was no difference between the model considering and ignoring $M_3C$ precipitates. It seems considered that pinning force exerted by $M_3C$ Precipitates was lower than driving force for grain growth due to large size and small fraction of precipitates, and mobility of grain boundary was low in the lower temperature range.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.66-73
• /
• 1991

During the growth of macroscopically dislocation-free Czochralski silicon crystal, micro precipitates causing stacking faults in the silicon wafer during the oxidation are formed Thermal history the cryscausing acquire during the growth process is known to be a key factor determining the nucleation of this micro precipitates. In this article, various mechanisms suggested on the formation of microdefects in the silicon crystal are reviewed to secure the nucleation mechanism of the micro precipitates causing OSF whose pattern is normally ring or annular in CZ silicon crytal. B-defects which are known as vacancy clustering are considered to be the heterogeneous nucleation sites for the micro precipitates causing OSF in the CZ silicon crystals.

• Applied Microscopy
• /
• v.45 no.4
• /
• pp.230-235
• /
• 2015

Crystallographic models are effective tools to interpret, calculate and even to predict the preferred crystallographic morphologies of precipitates in various precipitation systems. The present study gives an introduction on the recently developed secondary constrained coincident site lattice (II-CCSL) model. Using the II-CCSL model, the interface matching condition of the ${\beta}-Mg_{17}Al_{12}$ precipitates with ${\alpha}-Mg$ matrix in an aged AZ91 alloy has been analyzed to rationalize the morphologies of the precipitates. The results show that the characteristic crystallographic features of the observed ${\beta}-Mg_{17}Al_{12}$ precipitates, i.e., the habit plane of the ${\beta}-Mg_{17}Al_{12}$ lath with a Burgers orientation relationship (OR) and the growth direction of the ${\beta}-Mg_{17}Al_{12}$ with a Crawley OR exhibit a better lattice matching degree than their vicinal orientations. Moreover, the Crawley OR is preferred to the Burgers OR due to a better lattice match.

• Applied Microscopy
• /
• v.43 no.3
• /
• pp.122-126
• /
• 2013

The heterogeneous nucleation of the ${\Theta}^{\prime}$ phase on nanoscale precipitates has been investigated using a combination of three-dimensional atom probe tomography and high-resolution transmission electron microscopy. Two types of ${\Theta}^{\prime}$ phases were observed, namely small (~2 nm thick) cylindrical precipitates and larger (~100 nm) globular precipitates and both appear to be heterogeneously nucleated on the nanoscale precipitates. The composition and crystal structure of precipitates were directly analyzed by combination of two advanced characterization techniques.

• Journal of the Korean Society for Heat Treatment
• /
• v.4 no.3
• /
• pp.21-30
• /
• 1991

Microstructural analysis was conducted to observe the effect of aging treatments in a Cr-Mn austenitic stainless steel containing nitrogen, and the amount, size, shape and distribution of precipitates were investigated. It was found that on water quenching from $1000^{\circ}C$ after holding 3 h at that temperature, the steel contained no precipitates observable by optical microscopy. Precipitation of phases begins at places most favorable for the formation of nuclei-in the boundaries of grains and twins. Precipitates were studied in detail by means of scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Chemical compositions of precipitates were examined by the use of scanning transmission electron microscopy (STEM) together with an energy dispersive X-ray (EDX) microanalysis. Also chromium depletion adjacent to grain boundary precipitates was investigated by the use of Auger electron spectroscopy (AES) for a direct examination of the fracture surface chemistry.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.332-337
• /
• 2001

The objective of research is to clarify the interaction between dislocations and precipitates during high temperature creep deformation behaviors of high Mn austenitic steels. After measuring the internal stress in minimum creep rate at 873K, a transmission electron microscope (TEM) observation was performed to investigate the interaction between dislocations and precipitates during high temperature creep deformation. The band width of effective stress and internal stress increased when the nitride precipitates distribute more densely. Fine nitrides disturbed the dislocation movement with pinning the dislocations and perfect dislocations were separated into Shockley partial dislocations by fine nitrides. Coarse nitrides disturbed the dislocation movement with climb mechanism.