• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.11a
• /
• pp.28-30
• /
• 1992

Long incubation period of W nucleation on the TiN glue layer is a serious problem in blanket W process. In this study we investigated the dependence of W nucleation and growth rate on the preparation method of the TiN film, deposition temperature, chemistry, $SiH_4/WF_6$ ratio and sputter etching, ion implantation, and $SiH_4$ flushing pre-treatments. Incubation periods of W nucleation and deposition rates of W growth on three different TiNs are in the order of TiN>RTP-TiN> annealed TiN and TiN${\leq}$RTP-TiN${\leq}$ annealed TiN, respectively. $\beta$-W is not found on TiN substrate even for high $SiH_4/WF_6$ ratio. Sputter etching pre-treatment increases incubation period of W nucleation, while it decreases deposition rate. $SiH_4$ flushing pre-treatment decreases incubation period, but it slightly decreases deposition rate.

• Textile Coloration and Finishing
• /
• v.19 no.4
• /
• pp.1-9
• /
• 2007

In recent years, the application of digital textile printing has increased. The benefits of using this method include the ease of sampling and the production of printed textiles. However, the production process of digital textile printing differs from that of conventional printing. For successful digital textile printing by ink-jet technology, the pretreatment of fabrics is very important in order to overcome the following problems. Low viscosity ink can spread easily on the textile surface leading to poor resolution. As a result, the combination of ink and pretreatment chemicals is still impractical and consequently most fabrics used in digital textile printing will require a pre treated coating in order to prevent the ink colours from bleeding on the fabric. Research presented in this paper shows some preliminary attempts to establish the relationship between the pre treatment and the digital textile printing quality. Various cotton fabrics were treated with pre treatment agents including ingredients like thickener, alkali and humectant, and then ink spread effect and colour yield of printed fabrics by reactive ink were analysed by using an optical microscope and K/S value. The results show that digital textile printing quality on cotton fabrics can be optimized with appropriate pre treatments.

• Korean Journal of Adult Nursing
• /
• v.26 no.1
• /
• pp.107-116
• /
• 2014

Purpose: The purpose of this study was to identify the effects of multi-mode simulation learning on critical thinking disposition, on the problem solving process and on clinical competence of nursing students. Methods: A non-equivalent control group with pre-posttest was designed. The participants in this study were 65 students who were enrolled in an emergency and critical nursing course at N university. The treatment group consisted of 33 juniors in 2010 and the control group 32 juniors in 2011. Collected data were analyzed using chi-square, independent t-test, and ANCOVA with the SPSS/WIN 18.0 for Window Program. Results: There were significant increases in problem solving process and clinical competence in the treatment group who participated in the multi-mode simulation learning compared to the control group who did not (t=-2.39, p=.020; F=12.76, p=.001). However, there were no significant differences in critical thinking disposition between the treatment and control group (t=0.40, p=.692). Conclusion: Multi-mode simulation is an effective teaching and learning method to enhance the problem solving process and clinical competence of nursing students. Further exploration is needed to develop and utilize multi-mode simulation for diverse scenarios, depending on emergency nursing educational goals and environments and to develop a universal method to measure outcomes.

• Journal of Korean Dental Science
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2023

Dental treatment for the disabled should be a customized that considers the characteristics and degree of cooperation of each disabled patient. There are additional considerations during implant treatment and tooth extraction in disabled patients. Since some brain lesion disorder or cardiac disease patients may be taking antiplatelet or anticoagulant medications, it is necessary to evaluate whether these medications should be discontinued before an invasive procedure. Precautions should be taken for patients with heart valve disease considering the risk of infective endocarditis, especially during invasive dental procedures. Moreover, disabled patients may have difficulty in following instructions and cautions. There are specific considerations for each stage of implant treatment in disabled patients. In the case of patients who are in the pre- or post-transplant state, it is necessary to assess their general condition and oral disease due to the risk of infection. Since disabled patients with various systemic diseases may visit the dental clinic, it is important to understand their characteristics and treatment process in order to flexibly adjust the dental treatment plan accordingly.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.293-293
• /
• 2014

The applicability of graphene has been demonstrated in the electronic fields. But, high performance of graphene is limited by the contact resistance (Rc) at the metal-graphene interface. Recently, Rc was found to be improved by forming edge-contacted graphene via theoretical simulation. Based on the differences between the surface and edge contacts at the M-G interface, we demonstrate "edge-contacted" graphene through the use of a controlled plasma processing technique that generates the edge structure of the bond and significantly reduces the contact resistance. The contact resistance attained by using pre-plasma processing was of $270{\Omega}{\cdot}{\mu}m$. Mechanisms of pre-plasma process leading to low Rc was revealed by SEM and Raman spectroscopy. In the end, controlled pre-plasma processing enabled to fabricate CVD-graphene field effect transistors with an enhanced adhesion and improved carrier mobility.

• Journal of the Korean Institute of Gas
• /
• v.19 no.3
• /
• pp.32-37
• /
• 2015

The boil-off-gases(BOG) in cryogenic LNG storage tanks are generating continuously due to the heat leakage and need to be re-liquefied by the effective way. As the present method to reliquefy BOG is using LNG cold energy to be supplied after low pressure primary pump, the demand of LNG flow rate should be over 10 times of BOG produced rate to reliquefy it. This research invented new effective re-liquefaction system having only 3~4 times of LNG flow rate against unit BOG, that the pre-liquefaction process of NGL and the use of high pressure LNG cold energy after secondary pump. By the analysis, it could be high efficient reliquefying system for all amount of BOG treatment even during the summer time, and improvement of operation safety and efficiency of LNG terminal.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.3 no.1
• /
• pp.35-39
• /
• 1998

An enzymatic process was developed to produce protein hydrolysater form defatted soya protein. Various unit operations were tried, and the effects of pre- and post-treatments on the product characteristics such as degree of hydroylsis (DH), free amino acid content (%FAA) and average molecular weight (MW) were investigated. The use of acid washes showed no difference in %DH. Increasing pH during pre-cooking gave lower %DH. Alkaline cooking made too much insoluble protein, thus the protein yield was too small. A better hydrolysis with more acceptable taste was obtained when the combination of Neutrase/Alcalase/Flavourzyme was used in place of Alcalase/Flavourzyme combination; Untoasted defatted soya was more effective on the proteolysis than toasted one. The MW of the evaporated and spray dried product was higher than that of undried product, due to precipitation of low-solubility components. When ultrafiltration and the product concentration carried out the product separation by reverse osmosis, the solubility and the taste of the product were improved. The difference between enzyme hydrolysate and acid hydrolysate was significant in free amino acid composition, especially in tyrosine, phenylalanine, glutamine and asparagine.

• Journal of Korea Foundry Society
• /
• v.25 no.6
• /
• pp.233-239
• /
• 2005

Contact material is widely used in the field of electrical parts. Ag-CdO has a good wear resistance and stable contact resistance. We studied a lifetime of Ag-CdO material because of getting better properties of Ag-CdO using Post-oxidation. The experimental procedure were melting using high frequency induction, heat treatment, rolling and internal oxidation. And we experimented on difference process, Post-oxidaion. Then we tested a lifetime and analysed. We obtained the optimizing oxidation temperature was $750^{\circ}C$. Using Pre-oxidation, coarse oxide and depleted oxidation layer existed but finer oxides were existed and depleted oxidation layer was not using Post-oxidation. In Post-oxidation, The density was 10 $g/cm^{3}$, the hardness was Hv 80 and the adhesive strength was 9000N. The specimen of Post-oxidation had better lifetime properties than that of Pre-oxidation. We predicted that the lifetime of Post-oxidation specimen is more longer twice than that of Pre-oxidation one.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.2
• /
• pp.55-60
• /
• 2017

The supercritical $CO_2$ (sc-$CO_2$) mixture and the sc-$CO_2$-based Photoresist(PR) stripping(SCPS) process were applied to the removal of the post etch/ash PR residue on aluminum patterned wafers and the results were observed by scanning of electron microscope(SEM). In the case of MDII wafers, the carbonized PR was able to be effectively removed without pre-stripping by oxygen plasma ashing by using sc-$CO_2$ mixture containing the optimum formulated additives at the proper pressure and temperature, and the same result was also able to be obtained in the case of HDII wafer. It was found that the efficiency of SCPS of ion implanted wafer improved as the temperature of SCPS was high, so a very large amount of MEA in the sc-$CO_2$ mixture could be reduced if the temperature could be increased at condition that a process permits, and the ion implanted photoresist(IIP) on the wafer was able to be removed completely without pre-treatment of plasma ashing by using the only 1 step SCPS process. By using SCPS process, PR polymers formed on sidewalls of metal conductive layers such as aluminum films, titanium and titanium nitride films by dry etching and ashing processes were removed effectively with the minimization of the corrosion of the metal conductive layers.

• Journal of Distribution Science
• /
• v.16 no.2
• /
• pp.53-65
• /
• 2018

Purpose - The purpose of this study is to investigate the effect of gamma - irradiation on the effluent from food distribution in the large agricultural and marine products market. This study will contribute to the distribution process as well as the agricultural and fishery distribution facilities. Research design, data, and methodology - In order to reduce the odor, the smell was examined in the anaerobic digestion process by irradiating gamma rays to the wastewater of mixed food discharged from a large restaurant. An odor determination panel list was constructed to determine if the odor was present in the air dilution drainage and the odor concentration was analyzed by instrumental analysis. Results - It was confirmed that the sulfur content increased gradually from 3 months. Ammonia decreased from 33.57ppm at the initial measurement to 4.12 ppm at the end of the experiment. Methane production was highest at 100kGy when exposed to gamma rays of 0-200kGy at pH 12. In other words, it is considered that gamma irradiation doses are most effective at 100kGy and are suitable for large capacity wastewater treatment facilities in terms of economic feasibility. Conclusions - In pre-treatment of compound food wastewater, gamma irradiation is most cost effective when examined at 100kGy. The economic efficiency of the pre-treatment method by gamma irradiation is much higher than the wastewater treatment in the large-scale agricultural and marine products distribution market.