• 한국의류학회지
• /
• 제36권12호
• /
• pp.1310-1317
• /
• 2012

This study examines the possibilities to improve natural dyestuff's (Pinux$^{TM}$) dyeability and colorfastness for C/R (Cotton/Rayon (40/60)) and W/T (Wool/Tencel (10/90)) knitted fabrics in cationizing and smectiting for pre-treatment, simultaneous-treatment and post-treatment process sequences; as well as various other treatment methods. The sample dyeability showed the strongest K/S value in the order of smectite (S) < cationization + smectite (C+S) < cationization (C); however, the K/S value showed a low level in the simultaneoustreatment method of smectite. Colorfastness to washing improved in the order of C < C+S < S, and after the smectite post-treatment process, C/R improved from Grade 1 to Grade 4 and W/T improved from Grade 1-2 to Grade 4. Colorfastness to perspiration generally improved in the same order as the colorfastness to washing and after the smectite post-treatment process C/R, W/T sample's acidic and alkaline colorfastness to perspiration improved greatly. As for the colorfastness to rubbing, the addition of smectite in the simultaneous-treatment and post-treatment processes resulted in improved wet-colorfastness; however, smectite showed less effect on the colorfastness to light compared to other colorfastness ratings.

• Journal of Microbiology and Biotechnology
• /
• 제29권11호
• /
• pp.1760-1768
• /
• 2019

The use of lignocellulosic biomass such as rice straw can help subsidize the cost of producing value-added chemicals. However, inhibitory compounds, such as phenolics, produced during the pre-treatment of biomass, hamper the saccharification process. Laccase and electrochemical stimuli are both well known to reduce phenolic compounds. Therefore, in this study, we implemented a bioelectrochemical detoxification system (BEDS), a consolidated electrochemical and enzymatic process involving laccase, to enhance the detoxification of phenolics, and thus achieve a higher saccharification efficiency. Saccharification of pretreated rice straw using BEDS at 1.5 V showed 90% phenolic reduction (Ph_r), thereby resulting in a maximum saccharification yield of 85%. In addition, the specific power consumption when using BEDS (2.2 W/Kg Ph_r) was noted to be 24% lower than by the electrochemical process alone (2.89 W/kg Ph_r). To the best of our knowledge, this is the first study to implement BEDS for reduction of phenolic compounds in pretreated biomass.

• Environmental Engineering Research
• /
• 제15권4호
• /
• pp.225-230
• /
• 2010

In order to treat soil contaminated with high percentages of water and petroleum, the combined microwave and thermal desorption process was studied, which was composed of the consecutive connection of two pre-treatment processes. For the thickness of the contaminated soil layer on the transfer conveyor belt, the optimal total petroleum hydrocarbon (TPH) removal rate was studied with respect to the duration of microwave exposure in the consecutive process combined with thermal desorption. The TPH removal rate when the contaminated soil layer thickness was 1 cm at 6 kW of microwave power was 80%. The removals rates for 2 and 3 cm soil layer thicknesses were both 70%. Under identical experimental conditions, the TPH removal rate for the microwave pre-treatment, when considering the soil particle size, was over 70%. The lowest TPH removal rate was achieved with a particle diameter of 2.35 mm. For contaminated soil with 30% water content, 6 kW and a thermal desorption temperature of $600^{\circ}C$ were the optimal operational conditions for the removal of THP. However, considering the fuel consumption cost, 4 kW and a thermal desorption temperature of $300^{\circ}C$ would be the most economic conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.665-667
• /
• 2005

VIATRON TECHNOLOGIES has developed FE-RTP system that enables LTPS LCD and AMOLED manufacturers to produce poly-Si films at low cost, high throughput, and high yield. The system employs sequential heat treatment methods using temperature control and rapid thermal processor modules. The temperature control modules provide exceptionally uniform heating and cooling of the glass substrates to within ${\pm}2^a\;C$. The rapid thermal process that combines heating with field induction accelerates the treatment rates. The new FE-RTP system can process $730{\times}920mm$ glass substrates as thin as 0.4 mm. The uniform nature of poly-Si films produced by FE-RTP resulted in AMOLED panels with no laser-Muras. Furthermore, FE-RTP system also showed superior performances in other heat treatment processes involved in poly-Si TFT fabrications, such as dopant activation, gate oxide densification, hydrogenation, and pre-compaction.

• Membrane and Water Treatment
• /
• 제11권2호
• /
• pp.151-158
• /
• 2020

ACF preparation from different materials has been attached with great attention during these years. This study was conducted to prepare activated carbon fiber (ACF) from luffa through the processes i.e pre-treatment, pre-oxidation and carbonization activation. Besides, this study also characterizes the ACF and its effect, i.e effect of pre-oxidation time and temperature also activation time and temperature on the compressive strength of ACF were investigated. The results from SEM, BET, FTIR and XRD show that the ACF is very efficient. The products under the optimum conditions had a specific surface area of 478.441 m2 /g with an average pore diameter of 3.783nm, and a pore volume of 0.193 cm3 /g. The surface of the luffa fiber is degummed and exposed, which is beneficial to the subsequent process and the increase of product properties. The compressive strength of HP-ACF was prepared under the optimum conditions, which can reach 0.2461 MPa. ACF is rich in micro-pores and has a good application prospect in the field of environmental protection.

• 유기물자원화
• /
• 제21권4호
• /
• pp.62-71
• /
• 2013

본 연구는 돼지분뇨 슬러리를 이용하여 혐기소화 하는 과정에서 소화원료 중에 포함된 고형물의 크기를 감소시키는 전 처리 기술의 적용에 따른 메탄생성 효율을 분석하기 위하여 수행되었다. 소화원료의 입자 크기 감소는 혐기소화 과정에서의 가수분해 정도를 높여서 혐기소화 효율을 증진시킨다. 본 시험에서 적용한 전 처리 방법으로는 오존을 이용한 방법, 캐비테이션을 이용한 방법 그리고 분쇄장치를 이용하여 물리적으로 고형물 크기를 줄이는 방법 등을 적용했다. 전 처리 방법에 따른 메탄가스 발생량은 분쇄 방법, 오존 적용, 캐비테이션 적용 방법 순으로 높게 나타났으며, 두 가지의 전 처리 방법을 병합하여 적용하는 복합공정으로 처리하였을 경우에는 분쇄 처리 후 오존 처리, 캐비테이션 처리 후 오존 처리, 분쇄 처리 후 캐비테이션 처리를 적용하는 순으로 전 처리효과가 높게 나타났다. 돼지분뇨 슬러리를 두 가지 조합의 병합 공정으로 처리하였을 경우 단독 공정에 비해 메탄 발생량이 약 20% 이상 증가하였다. 평균 메탄함량 역시 분쇄 처리 후 오존 처리를 병합한 처리구에서 높게 나타났다. 돼지분뇨 슬러리를 소화원료로 이용하여 시험용 소화조 운영하였을 때 가스 발생량 평균값과 메탄의 평균농도는 전 처리를 하지 않은 경우에는 각각 298.8L와 55.7%인 반면에 전 처리를 실시한 시험구에서는 각각 325.9L와 59.7% 수준을 나타냄으로써 돼지분뇨 슬러리의 경우에서도 전 처리의 효과가 있는 것으로 나타났다. 전 처리를 하였을 경우가 처리하지 않은 구에 비해 바이오가스 중의 메탄함량은 높고 CO2 함량은 상대적으로 더 낮게 나타났다. 돼지분뇨 슬러리에 대해 전 처리를 수행하였을 경우가 전 처리를 하지 않은 경우에 비해 유입 VS당 가스발생량도 더 많았다.

• 한국재료학회지
• /
• 제23권10호
• /
• pp.543-549
• /
• 2013

The purpose of this paper was to investigate the effect of a high-energy milling (HEM) process on the particle morphology and the correlation between a thermal treatment and tetragonal/monoclinic nanostructured zirconia powders obtained by a precipitation process. To eliminate chloride residue ions from hydrous zirconia, a modified washing method was used. It was found that the used washing method was effective in removing the chloride from the precipitated gel. In order to investigate the effect of a pre-milling process on the particle morphology of the precipitate, dried $Zr(OH)_4$ was milled using a HEM machine with distilled water. The particle size of the $Zr(OH)_4$ powder exposed to HEM reduced to 100~150 nm, whereas that of fresh $Zr(OH)_4$ powder without a pre-milling process had a large and irregular size of 100 nm~1.5 ${\mu}m$. Additionally, modified heat treatment process was proposed to achieve nano-sized zirconia having a pure monoclinic phase. It was evident that two-step calcining process was effective in perfectly eliminating the tetragonal phase, having a small average particle of ~100 nm with good uniformity compared to the sample calcined by a single-step process, showing a large average particle size of ~300 nm with an irregular particle shape and a broad particle size distribution. The modified method is considered to be a promising process for nano-sized zirconia having a fully monoclinic phase.

• 한국환경과학회지
• /
• 제22권4호
• /
• pp.453-461
• /
• 2013

This study, changes in raw water quality is to indicate on the efficiency of ozone treatment of each pollutant as compared to derive the appropriate operating measures. The appropriate selection for injection rate of pre-ozone and did not inject pre-ozone assess changes in the water. When good water quality, you not injected of pre-ozone to evaluate the economic efficiency of electricity and put the most cost-effective ozone concentration were evaluated. Evaluation remove organic matter and chlorophyll-a concentration level in experiments with each factor of the water DOC> 2.5 mg/L, THMFP> 70 ${\mu}g/L$, Chl-a> 30 $mg/m^3$or less constant process, if you do not need to put pre-ozone showed little impact. It also does not put you in pre-ozone appropriate produce enough power rate savings was calculated as approximately 90 million won. Ability to remove organic materials and the ability to produce disinfection byproducts, and cost-effective decisions by considering the concentration of injection if pre-ozone 1 mg/L was investigated by the appropriate concentration of ozone injection.

• 동아시아식생활학회지
• /
• 제10권2호
• /
• pp.136-141
• /
• 2000

천연에 널리 존재하는 민들레를 차라는 식품형태로 접목시켜 상용식품으로 개발하고자 전처리 과정에 따른 특성변화를 분석하였다. 그 결과, 고형분 함량과 추출수율은 예비건조구보다 예비건조를 하지 않은 비처리구에서 낮은 값을 나타내었다. 탁도와 갈색도는 예비건조 유무에 따라 큰 차이가 없었지만 비처리구보다 예비건조구에서 다소 높은 갈색도를 나타내었고 찌는 시간이 길어질수록 낮은 탁도와 갈색도를 나타내었다. 관능검사 결과, 각 변수간에 교우작용이 생겨 유의적인 차이는 없었으나 예비건조 하지 않고 찌는 시간 60초로 처리할 경우, 산 맛, 풋내 및 떫은맛이 가장 적었다. 전체적인 기호도는 비처리구보다 예비건조구에서 유의적으로 매우 높은 평가를 나타내었고. 예비건조 하지 않은 비처리구는 60초간 찐 뒤 볶음처리 하는 것이 기호도면에서 유의적으로 높은 점수를 나타내었다. 송풍건조 시간이 길어질수록 고형분 함량, 추출수율. a값, b값, 탁도 및 갈색도는 높았고, L값은 낮았다. 볶음시간도 같은 경향을 나타내었다. 전체적인 기호도는 10시간 송풍 건조하여 5분간 볶음처리 하는 것이 가장 높은 기호도를 나타내었다. 위의 결과를 종합해 볼 때 비처리구에서 60초 찐 후 볶음 차 제조 공정에 따라 제조한 것과 3$0^{\circ}C$에서 10시간 송풍건조 후 볶음 차 제조공정에 따라 제조한 것이 좋은 민들레 차를 제조하기 위한 공정이라고 말할 수 있다.

• Environmental Engineering Research
• /
• 제23권2호
• /
• pp.136-142
• /
• 2018

The river water source of Saidabad Surface Water Treatment Plant at Dhaka, Bangladesh, is deteriorated too much to be treated by conventional treatment process due to excessive ammonia pollution. In order to improve the raw water quality before it enters into the main treatment chain, a pilot study was conducted for pre-treatment of the raw water. The objective is to investigate the rate of reduction of ammonia using the Meteor pilot, a biological pretreatment system, which is a laboratory scale Moving Bed Biofilm Reactor with a nominal volume of hundred liters, filled with 50 L of Meteor 660 media. The reduction of ammonia was quite significant on average 73%, while the reduction of COD was in a range from 20 to 60%. The Meteor pilot was able to treat and nitrify the raw water and produce an effluent that respects the guarantee of ammonia < $4.0mg\;NH_3-N/L$ when the raw water ammonia concentration was < $15mg\;NH_3-N/L$. The study identified operating parameters necessary to achieve the desired goal of adequate ammonia removal. The study results would benefit a range of systems across the country by providing guidance on the design and operation of a biological pre-treatment system for ammonia removal.