• Textile Coloration and Finishing
• /
• v.6 no.2
• /
• pp.1-9
• /
• 1994

In order to study the effect of mordanting on silk fabrics treated with tannin, those fabrics were treated with Al, Cu, Cr, Fe, Sn by pre and post mordanting. It was studied about color change, weighting effect, dgree of photodegradation by pre and post mordanting. The results are as fallows ; 1. On the addition of mordants into mimosa and tannic acid solution, &{\lambda}_{max}& of the former was slightly blue-shifted, on the other hand, &{\lambda}_{max}& of the latter was obviously Red-shifted. 2. In case of Cu, Cr, Pre mordanting, weighting effect were appeared. Weighting effect of silk fabrics treated with Tannic acid increased higher than mimosa by mordanting. 3. In color change, Silk fabrics treated with Mimosa and Tannic acid generally changed to red direction and fabrics treated with tannic acid changed to yellow direction by pre and post mordanting. 4. In the photodegradation, the degree of photodegradation on mordanted fabrics increased. Its degree was slack in Cu, Cr, Post mordanting. On the other hand, Al, Fe, Sn were greate. Silk fabrics treated with Mimosa and Tannic acid got inhibiting effect on photodegradation.

• The Journal of Dong Guk Oriental Medicine
• /
• v.5
• /
• pp.167-186
• /
• 1996

This study aimed to evaluate the protective effect of the MeoH extract of Ikhwangsan against galactosamine-induced hepatotoxicity. In the experiments, after treated with Ikhwangsan methanol extract to the rats for 15days and then induced hepatotoxicity with galactosamine for 2days. Then content of glutathione, level of lipid peroxide and activity of GOT GPT in the hepatic tissue, activity of GOT GPT ${\gamma}$-GTP ALP and ratio albumin/globulin in serum were measured. The results were obtained as followed : 1. The content of hepatic glutathione was significantly reduced by galactosamine. The test group which have been pre-treated by Ikhwangsan was confirmed considerably increased. 2. The level of hepatic lipid peroxide was increased by galactosamine. The test group which have been pre-treated by Ikhwangsan was confirmed considerably reduced. 3. The activity of GOT GPT in the hepatic tissue was significantly constrained by galactisamine. The test group which have been pre-treated by Ikhwangsan was confirmed considerably increased. 4. The activity of GOT GPT in serum was increased by galactosamine. The test group which have been pre-treated by Ikhwangsan was confirmed considerably reduced. 5. The activity of ${\gamma}$-GTP in serum was increased by galactosamine. The test group which have been pre-treated by Ikhwangsan was reduced. 6. The activity of ALP in serum was increased by galactosamine. The test group which have been pre-treated by Ikhwangsan was confirmed considerably reduced. 7. The ratio albumin/globulin in serum was reduced by galactosamine. The test group which have been pre-treated by Ikhwangsan was increased.

• Textile Coloration and Finishing
• /
• v.23 no.2
• /
• pp.69-75
• /
• 2011

A pre-treatment process has been developed for natural dyeing of wool by which the dyed materials have been imparted antimicrobial efficacy against both gram-positive and gram-negative bacteria durable up to 20 washes. In this process, wool fabrics were treated with citric acid under oxidizing condition prior to dyeing. The treated fabrics were then dyed with four different types of natural dye powders obtained from leaves of silver oak, wattle, tanner's senna and flame of forest. All the natural dyes produced yellowish brown colour on wool fabrics. The washing and light fastness properties of the fabrics subjected to pre-treatment were one grade higher compared to those of the dyed fabrics without pre-treatment. The pre-treated wool fabrics showed antimicrobial efficacy against both gram-positive bacteria (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli). The fabrics dyed without pre-treatment showed antimicrobial efficacy against gram-positive bacteria (Staphylococcus aureus) only. The durability of antimicrobial efficacy was higher in pre-treated and dyed wool fabrics compared to the dyed fabrics without pre-treatment.

• The Plant Pathology Journal
• /
• v.23 no.3
• /
• pp.203-209
• /
• 2007

Infection structures were observed using a fluorescence microscope at the penetration sites on the leaves of potato plants pre-inoculated with the bacterial strains Pseudomonas putida TRL2-3, Micrococcus luteus TRK2-2, and Flexibacteraceae bacterium MRL412, which mediated an induced systemic resistance on potato plants against late blight disease caused by Phytophthora infestans. In order to compare the infection structures on the leaves expressing systemic acquired resistance, the leaves of potato plants pre-treated with DL-3-amino butyric acid (BABA) were also observed after challenge inoculation with the same pathogen. The infection structures were investigated. The total number of germination and appressorium formation of P. infestans were counted. Furthermore, the frequencies of fluorescent epidermal cells at the penetration sites, which indicate a defense response of plant cell, were estimated. There were no differences on the germination rates of the fungal cysts among the untreated control, BABA pre-treated, and bacterial strains pre-inoculated plants. However, appressorium formation was slightly decreased on the leaves of BABA pre-treated plants compared to those of untreated as well as bacterial strains pre-inoculated plants. Furthermore, the frequencies of fluorescent cells of BABA pre-treated and bacterial strains pre-inoculated were higher than that of untreated plants, indicating an active defense reaction of the host cells against the fungal attack. On the other hand, the pre-treatment with BABA caused a stronger fluorescent of epidermal cells at the penetration sites compared to the pre-inoculation with the bacterial strains. Interestingly, the frequency of fluorescent cells by BABA, however, was lower than that by the bacterial strains. Based on the results it is suggested that the infection structures showing resistance reaction on the leaves of potato plants were different between by pre-inoculation with bacterial strains and by pre-treatment with BABA against the late blight pathogen.

• Journal of Surface Science and Engineering
• /
• v.54 no.4
• /
• pp.184-193
• /
• 2021

This study demonstrates formation behavior and morphological changes of PEO (Plasma Electrolytic Oxidation) films on AZ91 Mg alloy as a function of pre-treatment time in 1 M HF solution at 25 ± 1 ℃. The electrochemical behavior and morphological changes of AZ91 Mg alloy in the pre-treatment solution were also investigated with pre-treatment time. The PEO films were formed on the pre-treated AZ91 Mg alloy specimen by the application of anodic current 100 mA/cm² of 300 Hz AC in 0.1 M NaOH + 0.4 M Na₂SiO₃ solution. Vigorous generation of hydrogen bubbles were observed upon immersion in the pre-treatment solution and its generation rate decreased with immersion time. It was also found that 𝛽-Mg₁₇Al₁₂ in AZ91 Mg alloy was dissolved and a protective thin film of MgF₂ was formed on the AZ91 Mg alloy surface during the pre-treatment process in the 1 M HF solution. PEO film did not grow on the AZ91 Mg alloy specimen when the surface was not pre-treated and irregular PEO films with nodular defects were formed for the specimens pre-treated up to 1 min. Uniform PEO films were formed when the AZ91 Mg alloy specimen was pre-treated more than 3 min. The growth rate of PEO films on AZ91 Mg alloy increased significantly with increasing pre-treatment time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.1
• /
• pp.18-23
• /
• 2010

We demonstrated that the solution processed organic light-emitting diodes (OLEDs) have the high efficiency with pre-treated indium-tin-oxide (ITO). ITO surface was pre-treated with four methods and compared each other. The pre-treatment of ITO surface improves the chemical and physical characteristics of ITO such as the surface roughness, adhesion property, and the hole injection ability. These properties were analyzed by the contact angle, atomic force microscope (AFM) image, and the current flow character in device. As a results, the device with ITO pre-treated by $O_2$ plasma shows the current efficiency of 5.93 cd/A, which is 1.5 times the device without pre-treatment.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.40-43
• /
• 2009

This study is for investigating the effect of induction heating with various alloy elements to manufacture the pre-heat treated steels of 100kgf/$mm^2$ for cold heading. For four kinds of steels, the condition of induction heating (especially, induction tempering) were observed, and their microstructure and tensile and compressive properties were investigated. The middle carbon steel and the low carbon Cr-Mo steel are needed the higher Grange-Baughman tempering parameter than that of the low carbon Cr steel to obtain 100kgf/$mm^2$ tensile strength. For accomplishing the pre-heat treated steel of 100kgf/$mm^2$ tensile strength having advanced cold heading. It is needed that the pre-heat treated steel is manufactured by induction quenching and tempering with the low carbon alloy steel to have the high ratio of ferrite and the fine globular cementite simultaneously.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.35-36
• /
• 2009

Development trend and current status were surveyed for pre-heat-treated high strength cold heading quality (CHQ) wire and it's forming technology. Spheroidizing, quenching, and tempering heat treatments are eliminated by adapting the pre-treated wire, which could reduce energy consumption rate and green house gas emission rate during produce parts requiring high strength. There are some challenging problems to expand application area such as enhancing forming tool life, and preventing delayed failure. Domestic research movement concerning the development and application of the new high strength wire was introduced.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.43-44
• /
• 2009

Fabrics for Digital Textile Printing (DTP) are different from it of general textile printing. It is necessary to pre-treatment of chemical agents for desired quality. But this process does not correspond with simplification of DTP processing. In this research, we pre-treated of cotto is necessary to pre-treatment of chemical agents for desired quality. But this process does not correspond with simplification of DTP processing. In this research, we pre-treated of cotton fabric for DTP by atmosphere plasma treatment and we understood that pre-treatment of fabric by atmosphere plasma treatment was more simple DTP process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.1 no.2
• /
• pp.65-71
• /
• 1988

This study reports light and electron microscope examination of rumen fungal colonization of alkali-treated roughage feeds incubated in decron bags in the rumen of cannulated sheep for varying time intervals. Six roughages, pre-treated with ammonium hydroxide or sodium hydroxide at 4% (w/w) level were examined together with untreated control samples. Alkali pre-treatment was associated with an earlier and more pronounced fungal colonization than all control roughages. Sodium hydroxide pre-treatment was significantly more effective than ammonium hydroxide in improving the susceptibility of roughages to rumen fungal colonization and studies by SEM showed that the pre-treatment permitted greater penetration of feeds by fungi. Sodium hydroxide pre-treatment also significantly increased dry matter disappearance from feed held in Dacron bags in the rumen with all feeds except Lucerne stem. It is not known to what extent fungal activity contributed to increased breakdown of the feeds.