• Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2007

Most of the herb residue producing from oriental medical clinics(OMC) and hospitals(OMH) is wasted in Korea. To develop of adsorbent for removing heavy metal from wastewater, the various pre-treatment methods of the herb residue were evaluated by potentiometric titration, Freundlich isotherm adsorption test and the kinetic adsorption test. The herb residue was pre-treated for increasing the adsorption capacity by cleaning with distilled water, 0.1 N HCl and 0.1 N NaOH and by heating at $370^{\circ}C$ for 30 min. It showed a typical weak acid-weak base titration curve and a short pH break like commercial activated carbon during photentiometric titration of pre-treated herb residue. The log-log plots in the Freundlich isotherm test were linear on the herb residue pre-treated with NaOH or HCl like commercial activated carbon. The adsorption capacity(qe) in the Freundlich isotherm test for $Cr^{6+}$ was 1.5 times higher in the pre-treated herb residue with HCl than in activated carbon. On the other hand the herb residue pre-treated with NaOH showed the good adsorption capacities for $Pb^{2+}$, $Cu^{2+}$ and $Cd^{2+}$ even though those adsorption capacities were lower than that of activated carbon. In kinetic test, most of heavy metals removed within the first 10 min of contact and then approached to equilibrium with increasing contact time. The removal rate of heavy metals increased with an increase of the amount of adsorbent. Likewise, the removal rates of heavy metals were higher in the herb residue pre-treated with NaOH than in that pre-treated with HCl. The adsorption preference of herb residues pre-treated with NaOH or HCl was $Pb^{2+}>Cu^{2+}$ or $Cd^{2+}>Cr^{6+}$ in the order. Conclusively, the herb residue can be used as an alternative adsorbent for the removal of heavy metals depending on pr-treatment methods.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.1
• /
• pp.101-110
• /
• 1995

In SMA(Shape Memory Alloy), the degradation by fatigue is one of the most important problems to be overcome, when SMA is used for robot-actuator materials. The actuator is operated repetitively for long time and its repeating operation develops the fatigue degradation of SMA. The fatigue degradation changes the transformation temperature and deformation behavior and results in inaccurate operation and deformation which results form repeating operation is to be investigated in advance and the scheme to resolve those problems have to be made for the design of actuator. In this paper, for the improvement of the fatigue degradation by repetive movement and better control of the correct movement by the stability of martensite transformation in the development of Robots actuator, Pre-strain(0, 1.5, 5, 8%) are loaded in the specimens and fatigue testing were carried out by the method of heating and cooling in direct condition. From the results of these experiments, the effect on pre-strain which affect the transformation characteristic and fatigue degradation phenomena were correctly investigated.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.5
• /
• pp.567-578
• /
• 2019

A common problem with fast-growing hardwoods is dimensional instability that limits use of their wood. In this study, we investigated the effects of pre-drying methods, temperatures, and heating duration on the specific gravity, water absorption, and dimensional stability of three tropical fast-growing hardwoods, jabon (Neolamarckia cadamba Roxb.), sengon (Falcataria moluccana Miq.), and mangium (Acacia mangium Willd.). Wood samples were pre-dried by two methods (fan and oven at $40^{\circ}C$), and heat treatments were performed at three temperatures (120, 150, and $180^{\circ}C$) for two different time periods (2 and 6 hours). The specific gravity, water absorption, dimensional stability, and structural changes of the samples were evaluated. The results revealed that heat treatments slightly reduced the specific gravity of all three wood species. In addition, the heat treatments reduced water absorption and significantly improved dimensional stability of the samples. Oven pre-drying followed by heat treatment at $180^{\circ}C$ for 6 hours resulted in good physical improvement of jabon and sengon wood. Fan pre-drying followed by heat treatment at $180^{\circ}C$ for 2 hours improved the physical properties of mangium wood. The heat treatment shows a promising technique for improving the physical characteristic of fast growing hardwoods.

• The Korean Journal of Pesticide Science
• /
• v.9 no.3
• /
• pp.237-242
• /
• 2005

This experiment was carried out to develop the fast and simple method for pesticide residue analysis by using solvent free solid injector (SFSI) and to validate the efficiency of the method developed for the residue analysis of the endocrine disruptor-like pesticides such as endosulfan, metribuzin, trifluralin and vinclozolin. The samples after freeze drying were sealed in glass capillary tubes and then introduced into the heated injector of gas chromatogaphy. The required pre-heating times were 1 min for endosulfan and trifluralin, 5 min for vinclozolin, and 10 min for metribuzin. The detection limits of endosulfan in chinese cabbages, metribuzin in lettuces, trifluralin in spinachs and vinclozolin in hot peppers were 0.05, 0.1, 0.05 and 0.05 ng, respectively and their recoveries were ranged from 74%, $98{\sim}107%$, $86{\sim}95%$ and $94{\sim}95%$, respectively. The detected level of metribuzine residue in field lettuce samples by using the SFSI was 0.6 ng/mg.

• Culinary science and hospitality research
• /
• v.20 no.2
• /
• pp.54-64
• /
• 2014

In order to enhance the firmness of retorted onion, long time, low temperature blanching(LTLT) in calcium solution was conducted. Pre-heating onion in calcium solution significantly improved its texture after high temperature sterilization as compared to conventional blanching alone. The improvement of the firmness by the LTLT blanching is related to the formation of strongly cross-linkages between carboxyl groups and divalent cations($Ca^{2+}$) by the action of pectin methy-lesterase(PME) in onion. A maximum firmness of retorted onion was obtained at the condition of pre-heating at $70^{\circ}C$ for 120min in 0.5%calcium solution. This result supports that the activity of PME and the content of bonded calcium in onion were highest at $70^{\circ}C$. Additionally, the reaction of alkali calcium with various divalent cations such as $Mg^{2+}$ provided a function to hydrolyze pectin molecules, resulting in firmer retorted onion in various calcium agents. Further investigation should be carried out to determine the optimal condition for prevention of tissue softening of various retorted vegetables.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.358-364
• /
• 2018

An isotropic pitch precursor for fabricating carbon fibres was prepared by co-carbonization of ethylene bottom oil(EBO) and polyvinyl chloride (PVC). Various pre-treatments of EBO and PVC, and a high heating rate of $3^{\circ}C/min$ with no holding time, were evaluated for their effects on the oxidative stabilization process and the mechanical stability of the resulting fibres. Our stabilization process enhanced the volatilization, oxidative reaction and decomposition properties of the precursor pitch, while the addition of PVC both decreased the onset time and accelerated the oxidative reaction. Aliphatic carbon groups played a critical role in stabilization. Microstructural characterization indicated that these were first oxidised to carbon-oxygen single bonds and then converted to carbon-oxygen double bonds. Due to the higher heating rate and lack of a holding step during processing,the resulting thermoplastic fibers did not completely convert to thermoset materials, allowing partially melted, adjacent fibres to fuse. Fiber surfaces were smooth and homogeneous. Of the various methods evaluated herein, carbon fibers derived from pressure-treated EBO and PVC exhibited the highest tensile strength. This work shows that enhancing the naphthenic component of a pitch precursor through the co-carbonization of pre-treated EBO with PVC improves the oxidative properties of the resulting carbon fibers.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.6
• /
• pp.32-37
• /
• 2013

The scope of this study was to develop, design, and build an ex-situ remediation system of using the heating and water sparging treatment for the highly volatile DNAPL (Dense Non-Aqueous Phase Liquid) contaminated groundwater, and to conduct pilot testing at the site contaminated with DNAPL. The TCE (Trichloroethylene) removal was at the highest rate of 94.6% with the water sparging at $70^{\circ}C$ in the lab-scale test. The pilot-scale remediation system was developed, designed, and fabricated based on the results of the lab-scale test conducted. During the pilot-scale testing, DNAPL-contaminated groundwater was detained at heat exchanger for the certain period of time for pre-heating through the heat exchanger using the thermal energy supplied from the heater. The heating system supplies thermal energy to the preheated DNAPL-contaminated groundwater directly and its highly volatile TCE, $CCl_4$ (Carbontetrachloride), Chloroform are vaporized, and its vaporized and treated water is return edback to the heat exchanger. In the pilot testing the optimum condition of the HWSRS was when the water temperature at the $40^{\circ}C$ and operated with water sparging concurrently, and its TCE removal rate was 90%. The efficiency of the optimized HWSRS has been confirmed through the long-term performance evaluation process.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.1
• /
• pp.8-13
• /
• 1990

The microscopic relaxation parameters for the single crystal were measured by using thermally stimulated depolarization (TSD). Initial rise method, various heating rate method and total glow peak method were used for the determination of the activation energy and Debye relaxation time from TSD glow curves. Activation energy, pre-exponential factor and relaxation time for impurity-vacancy dipole reorientation were 0.55eV, 1.97$\times$10 super(-12) sec and 12.19sec in average, respectively. Dielectric dissipation factor for the crystal was calculated from the measured TSD glow curve, its value being about 3$\times$10 super(-2).

• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1367-1373
• /
• 2014

This study was conducted to evaluate the effects of heating hatching eggs on the number of day-old chicks, egg temperature and egg weight during extended storage, and to provide basic information for improving hatchability to livestock producers. Eggs (Hy-line) were subjected to the following treatments: "control": eggs were maintained in an incubator after storage for 8 days; "T1": eggs were preheated for 8 hours at $23.9^{\circ}C$ after storage for 8 days in a hatchery; "T2": eggs were initially heated for 8 hours at $37.8^{\circ}C$ in an incubator and then preheated for 8 hours at $23.9^{\circ}C$ in a hatchery after storage for 8 days. The results were as follows: First, at the end of the experiment, the total number of day-old chicks was higher in T1, followed by T2 and then the control. This indicated that chick hatchability may be improved when eggs are preheated. Second, compared with the control, the number of day-old female chicks was expected to be higher in treatments with pre-heating; however, the results indicated the opposite effect. Third, as storage time lengthened, the factor that influenced preheating (the main effect and interactions) was not egg weight but egg temperature measured in the upper, middle and bottom parts of incubator. The temperatures recorded in all treatments ranged from 37.97 to $38.40^{\circ}C$ in the upper parts of incubator, 37.80 to $38.26^{\circ}C$ in the middle parts of incubator, and 37.94 to $38.59^{\circ}C$ in the bottom parts of incubator over storage. In conclusion, preheating was very effective in improving hatchability, and egg temperature was the main factor affecting preheating and hatchability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.548-551
• /
• 1999

The cure characteristics of metal particle filled DGEBA/MDA/SN/ zeolite epoxy resin composite system for EMI shielding were investigated by dynamic DSC run method and FT-lR spectroscopy. As the heating rate increased, the peak temperature on dynamic DSC curve increased because of the rapid cure reaction. From the straight line of the Kissinger plot, the curing reaction activation energy and pre-exponential factor could be obtained. As the post-curing time at 15$0^{\circ}C$ increased, the glass increased the glass transition temperature or the thermal stability increased. When the post curing time is too long, the system filled with metallic Al particle can be thermally oxidized by the catalytic reaction of metal filler and the thermal stability of the composite for the EMI shielding application may be decreased.