• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.577-582
• /
• 2008

The present study has been conducted to study the performance of Dedicated outdoor air handling unit. Dedicated outdoor air handling unit consists of pre-cooler, dehumidification and after cooler. By combining dedicated outdoor air-conditioning and heat pump, a new four-season dedicated outdoor air handling unit has been developed. Amount of energy saved and condition when this new system is superior to conventional vapor-compression cooling system has been presented.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1175-1180
• /
• 2000

Recently, the crack of concrete induced by the heat of hydration of cement is a serious problem for more greater, special and higher strength of concrete structures. The increasing concrete's temperature is mainly caused by the heat of hydration of cement and so, to control the thermal stress of concrete structure is desirable to use low heater material of hydration. There are many methods to diminish the increasing of concrete temperature such as using of low heat cement, addition of fly-ash, application of pre-cooling, etc., and in this study, we evaluate the heating and mechanical properties of ultra low heat mass concrete using Low Heat Portland(KS Type IV) cement with 30% of limestone powder. The results of this study will be applied to side wall and bottom of No. 15 and 16 of underground LNG tank in Inchon.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.285-291
• /
• 2010

To provide required flow rates of cooling or circulating water properly, approach flow conditions of vertical pump systems should be in compliance with state of the art acceptance criteria. The direct inflow should be vortex free, with low pre-rotation and symmetric velocity distribution. Physical model investigations are common practice and the best tool of prediction to evaluate, to optimize and to document flow conditions inside intake structures for vertical pumping systems. Optimization steps should be accomplished with respect to installation costs and complexity on site. The report shows evaluation of various approach flow conditions inside a compact waste water pumping station. The focus is on the occurrence of free surface vortices and the evaluation of air entrainment for various water level and flow rates. The presentation of the results includes the description of the investigated intake structure, occurring flow problems and final recommendations.

• KIEAE Journal
• /
• 제13권3호
• /
• pp.27-32
• /
• 2013

Infiltration is air flow that occurs through cracks in buildings. According to level and kind of infiltration, the cooling load and heating load in buildings may increase. In this study I conducted field measurements to evaluate air tightness in 27 new apartment units. Field measurements for new apartments was the focus. For the de-pressurization method, the equipment utilized to gauge airtightness included KNS-5000C and KNS-4000 which were installed on the window in order to measure indoor air leakage. The results are summarized as follows. The average ACH50 of a $59m^2$ APT was 3.98, 3.82 for a $84m^2$ APT, and 2.73 for a $114m^2$ APT. The total average ACH50 of 27units was 3.51.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.561-562
• /
• 2006

The effect of chemical composition of the sintering atmosphere on density, microstructure and mechanical properties of Fe-3%Mn-(Cr)-(Mo)-0.3%C steels is described. Pre-alloyed Astaloy CrM and CrL, ferromanganese and graphite were used as the starting powders. Following pressing in a rigid die, compacts were sintered at 1120 and $1250^{\circ}C$ in atmospheres having different $H_2/N_2$ ratio and furnace cooled to room temperature. It has been found that the atmosphere composition has negligible effect on the as-sintered properties of the investigated materials.

• 열처리공학회지
• /
• 제32권5호
• /
• pp.195-200
• /
• 2019

For expanding the applications and workability of TiAl alloy, elongation is very important property. Fine microstructure is needed for elongation and physical properties of TiAl alloys. In this study, The effects of cyclic heat treatment process for fine microstructure of Ti-46Al-Nb-W-Cr-Si-C alloy, which was made by VAR (vacuum arc remelting) and VIM(vacuum induction melting) centrifugal casting process, was investigated. Cycle heat treatment process was very effective for recrystallization of this TiAl system, which has microstructure size of $50{\sim}100{\mu}m$ through pre-heat treatment, cyclic heat treatment in ${\alpha}+{\gamma}$ phase region and solution heat treatment respectively. Refined grain size was finally confirmed by photos of optical microscope and scanning electron microscope.

• 천문학회보
• /
• 제45권1호
• /
• pp.52.1-52.1
• /
• 2020

We propose semi-analytic models for the electron momentum distribution in weak shocks that accounts for both in situ acceleration and reacceleration through diffusive shock acceleration (DSA). In the former case, a small fraction of incoming electrons is assumed to be reflected at the shock ramp and pre-accelerated to the so-called injection momentum, pinj, above which particles can diffuse across the shock transition and participate in the DSA process. This leads to the DSA power-law distribution extending from the smallest momentum of reflected electrons, pref, all the way to the cutoff momentum, peq, constrained by radiative cooling. In the latter case, fossil electrons, specified by a power-law spectrum with a cutoff, are assumed to be re-accelerated from pref up to peq via DSA. We show that, in the in situ acceleration model, the amplitude of radio synchrotron emission depends strongly on the shock Mach number, whereas it varies rather weakly in the re-acceleration model.

• 콘크리트학회논문집
• /
• 제11권6호
• /
• pp.3-12
• /
• 1999

The larger, loftier and more highly strengthened the recent structures become, the greater attention is paid to the problem of thermal crack occurrence associate with hydration heat. As one of methods to solve the problem, a care has been taken to the improvement of construction such as the application of pre-cooling or pipe-cooling, adjustment of concrete block size, concrete placement timing, joint arrangement and so on. But it is expected that a proper selection of cement shall additionally contribute to the control of thermal cracks. In this study, thus, we selected 4 types of cements such as Type V for anti-sulphate, blast furnace cements (slag content of 45% and 65% respectively)and ternary blended low heat cement, and carried out mock-up tests. In every assigned time, temperatures and thermal stresses were measured and calculated from raw data. As a result of measurement, it was found that the magnitude of hydration heat is in order of blast furnace slag cement. Type V and ternary blended low heat cement. Results of thermal stresses were same as the order of temperature. In addition, thermal stresses calculated from the data of strain gauges showed almost similar to those measured from effective stress gauges only when strain values were adjusted properly in accordance with initial time of stress appearance. Theoretical results agreed well with the measured values comparatively, but showed slight differences. It is inferred that these differences shall be reduced if more tests capable of evaluating thermal characteristics of concrete are carried out.

• 대한기계학회논문집A
• /
• 제34권12호
• /
• pp.1917-1923
• /
• 2010

이 논문은 공압식 버터플라이 제어밸브를 이용한 냉각 프로세서의 모델규명 및 선행미분형 2 자 유도 PID 제어 알고리즘 개발에 대한 연구를 수행한다. 구동 제어밸브를 포함한 냉각 프로세서의 모델 구조는 시간지연을 포함한 2차 지연 시스템 형태로 주어지며, 이는 데모 플랜트로부터의 입출력 데이터를 통하여 전달함수의 형태로 규명된다. 2 자유도 PID 제어기에서 피드백 제어게인은 Kitamori 제어게인 조정법을 이용하여 설정되며, 피드포워드 제어게인은 제어 시스템의 성능을 만족하도록 하는 관점에서 결정된다. 이 논문에서 제안된 제어 알고리즘의 유용성은 컴퓨터 모의실험과 데모 플랜트의 실험을 통해 검증된다. 결과적으로 논문에서 제안된 제어 알고리즘은 기존의 1 자유도 PID 알고리즘보다 제어게인 설정이 매우 명확하고, 제어성능이 우수함을 보인다.

• Journal of Chest Surgery
• /
• 제16권1호
• /
• pp.65-74
• /
• 1983

Fifty cases of open heart surgery were done in the Department of Thoracic and Cardiovascular Surgery, Busan National University Hospital during 16 months from July, 1981 to October, 1982. The clinical data were analyzed and summerized as follows. 1. There were 34 cases (68%) of congenital anomalies and 16 cases (32%) of acquired heart diseases. Among the congenital cases, 27 were acyanotic and 7 were cyanotic. All of the acquired heat diseases, 16 cases were valvular diseases and they had valvular replacement surgery. 2. The age distribution of the congenital anomalies ranged from 6 to 27 years with mean age of 14.2 years, and the acquired heart diseases from 18 to 44 years mean age of 27.5 years. The difference of sex distribution was no significance. 3. The clinical minifestations in acyanotic congenital anomalies were exertional dyspnea (81.5%), recurrent respiratory infection (55.6%) and palpitation (22.2%), and in cyanotic congenital anomalies were exertional dyspnea (100%), syncope(57.1%) and growth retardation(57.1%), and in acquired heart diseases were dyspnea(100%), edema (62.5%) and general weakness (62.5%) 4. During the cardiopulmonary bypass, mild to moderate core cooling was performed and added topical cooling for more accurate myocardial preservation. 5. Two kinds of cardioplegic solution used in our institute were Bretschneider solution for the first 7 cases and mixed Harmann's solution 1 L with glucose 5gm, potassium chloride 26 mEq and sodium bicarbonate 24 mEq, making 376 mosmol/L and pH 8.3 at $25^{\circ}C$, for the rest 43 cases. 6. Various kinds of postoperative complications occurred in 14 cases (28%) and showed overall mortality 12%. The mortality along with each disease was 7.4% in congenital acyanotic cases, 42.9% in congenital cyanotic cases and 6.3% in acquired valvular diseases. 7. Pre-and postoperative diagnostic incompatibility was seen in 6 cases (12%). 8. The artificial valves used in the replacement surgery were lonescu-Shiley bovine xenograft in 6 cases and Carpentier-Edwards porcine xenograft in 10 cases.