• Smart Structures and Systems
• /
• v.31 no.5
• /
• pp.517-529
• /
• 2023

Using a device composed of two lateral pressure plates (LPPs) and a steel reinforcement bar to apply horizontal pressure on slope surfaces, a newly developed prestress-reinforced embankment (PRE) is proposed, to which can be adopted in strengthening railway subgrades. In this study, an analytical model, which is available of calculating additional confining stress (σ_H) at any point in a PRE, was established based on the theory of elasticity. In addition, to verify the proposed analytical model, three dimensional (3D) finite element analyses were conducted and the feasibility in application was also identified and discussed. In order to study the performance of the PRE, the propagation of σ_H in a PRE was analyzed and discussed based on the analytical model. For the aim of convenience in application, calculation charts were developed in terms of three dimensionless parameters, and they can be used to accurately and efficiently predict the σ_H in a PRE regardless of the embankment slope ratio and LPP side length ratio. Finally, the potential applications of the proposed analytical model were discussed.

• Korean Journal of Exercise Nutrition
• /
• v.16 no.1
• /
• pp.11-17
• /
• 2012

The purposes of this study were to investigate the effects of acute exercise on blood vaspin, glucose level, and inflammatory cytokines in middle-aged women with pre-diabetes. Nineteen middle-aged women (normal women, n = 11) and women with pre-diabetes(n = 8), who were apparently healthy and not taking any medications affecting their blood pressure or blood glucose, participated. Body fatness parameters including body mass index, body fat percentage, and waist circumference were measured using a bio-impedance analyzer. Resting blood pressure was measured in duplicate, and mean values were used for the data analysis. Regardless of group assignments, all subjects participated in a 3-day consecutive walking exercise at an intensity of 65% VO_2max targeting an energy expenditure of 1200 kcal (400 kcal per day). The major outcome variables included total cholesterol, triglycerides, high-density lipoprotein cholesterol, glucose, vaspin, interleukin-6, and adiponectin levels. Unlike normal women, women with pre-diabetes had a significant improvement in the homeostatic model assessment of insulin resistance (p < 0.025) with no significant group difference in response to acute exercise. The findings suggest that acute exercise results in a significant improvement in insulin sensitivity without any change in serum vaspin levels in women with pre-diabetes.

• Journal of the Korean Institute of Gas
• /
• v.15 no.6
• /
• pp.38-43
• /
• 2011

Natural gas liquefaction process runs under cryogenic condition, and it spends large amount of energy. Minimizing energy consumption of natural gas liquefaction process is an important issue because of its physical characteristics. Among many kinds of natural gas liquefaction processes, C3-MR(Propane Pre-cooled Mixed Refrigerant) process uses two kind of refrigerants. One is the propane as the pure refrigerant(PR) and the other is the mixed refrigerant(MR). In this study, to find the optimal compressing level, propane cycle is simulated on different pressure level. The case study result shows relationship between energy consumption and pressure level. As a result, the conclusion is that at a higher pressure level, process consumes lower energy. At 5 pressure-levels, energy consumption is 23.7% lower than 3 pressure-levels.

• Geomechanics and Engineering
• /
• v.24 no.6
• /
• pp.573-588
• /
• 2021

The interaction of cracks and water significantly affects the fracture mechanism of rocks. In this study, laboratory tests were conducted using sandstone samples containing a single fissure to explore the hydro-mechanical behaviors in the failure process of pre-cracked rocks. The internal crack characteristics were also analyzed using X-ray CT scanning. The results show that the confining pressure has the greatest effect on the mechanical properties (e.g., strengths, elastic modulus, and Poisson's ratio), followed by the fissure inclination and water pressure. At a lower fissure inclination, the confining pressure may control the type main cracks that form, and an increase in the water pressure increases the number of anti-wing cracks and the length of wing cracks and branch cracks. However, the fracture behaviors of samples with a higher fissure inclination are only slightly affected by the confining pressures and water pressures. The effect of fissure inclination on the internal crack area is reduced with the propagation from the fissure tips to the sample ends. The fissure inclination mainly affects the value of permeability but not affect the trend. The impact of pre-existing fissure on permeability is smaller than that of confining pressure and water pressure.

• Imaging Science in Dentistry
• /
• v.54 no.3
• /
• pp.251-256
• /
• 2024

Purpose: This study was performed to investigate the pattern of condylar pressure distribution in the discs of a patient diagnosed with disc displacement without reduction. Materials and Methods: This research consisted of a pre- and post-test observational clinical study. A patient diagnosed with disc displacement without reduction underwent treatment with an occlusal splint for 3 months. Finite element analysis employed a 3-dimensional model constructed from magnetic resonance images of the patient, taken both before the application of the splint and 3 months after its use. Results: The post-test model demonstrated a decrease in condylar pressure on the disc, with measurements dropping to 72 MPa from the pre-test level of 143 MPa. In the pre-test, the pressure distribution pattern was concentrated on the lateral posterior border, whereas in the post-test, it shifted toward the intermediate zone of the disc. Conclusion: Utilization of a stabilization splint for 3 months resulted in decreased pressure and a marked change in the pressure distribution pattern on the temporomandibular disc.

• Plant Journal
• /
• v.14 no.2
• /
• pp.39-44
• /
• 2018

In this study, I analyzed the effects on stabilizing the draft system, boiler efficiency when changing excess air ratio under 870 MW load limit operation condition in a large capacity coal fired power plant and decided optimum excess air ratio. It is positively necessary to choose adequate excess air ratio for stabilizing draft system because air pre-heater pressure drop and induced draft fan first stall margin are changing when adjusting excess air ratio. This study therefore, measured air pre-heater pressure drop, induced draft fan first stall margin, boiler efficiency, loss and has chosen adequate excess air ratio adjusting excess air ratio from 1.153 to 1.127. So it is recommended that the operation point needs to be changed to 1.127 that is not only to decrease air pre-heater pressure drop and to stabilize draft system and to secure stall margin but also to maintain boiler efficiency to equivalent level.

• Journal of East-West Nursing Research
• /
• v.16 no.1
• /
• pp.11-18
• /
• 2010

Purpose: The aim of this study was to examine the characteristics of hypertension-related nursing intervention programs and their effects on systolic and diastolic blood pressure. Methods: Fifteen studies were selected from four databases (Korean studies, Riss4U, RICHIS, and JKAN) published as of 2009. They were analyzed by meta-analysis method. The selected studies contained a control group with pre-test and post-test design, measured blood pressure as a dependent variable, and used a reported statistical value for blood pressure to measure the size of effects. Results: The hypertension-related nursing intervention programs were relatively effective in lowering both systolic and diastolic blood pressure, although they were more efficient to decrease diastolic pressure. Among the hypertension-related intervention programs, complementary and alternative therapies were more effective in lowering blood pressure compared to lifestyle change intervention. Conclusions: To acquire substantial data of intervention effects, and complementary and alternative therapy, subjects in pre-hypertensive stage, and elderly people, better industrial and scholastic research methods need to be developed for future research. Further studies are needed to establish complementary and alternative therapies. Studies with different group of participants and studies using effective research design are in need as well.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.421-427
• /
• 2015

Oriental melon (Cucumis melo L. var. makuwa) has been widely consumed as various processed foods, such as dried products, jelly, wine, juice, and vinegar, in Asian countries. In fruit processing, blanching and pressure treatments affect its quality, such as antioxidant activities, sensory characteristics, and etc. This study was conducted to evaluate the effects of blanching and pressure pre-treatments on oriental melon wine-making (BP, blanching and pressure filtration; BNP, blanching and non-pressure filtration; NBP, non-blanching and pressure filtration; and NBNP, non-blanching and non-pressure filtration). Physicochemical properties and antioxidant capacities by ${\alpha}$, ${\alpha}$-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity, ferric ion reducing antioxidant power (FRAP) assay, and total phenolic and total flavonoid contents were measured for comparison of the different pre-treatment methods. After the aging process, the alcohol contents and pH values showed no statistical differences, whereas the amount of soluble solids, reducing sugar, and titratable acidity were slightly different among the pre-treatments (p<0.05). The samples with blanching pre-treatment showed higher antioxidant capacities than those of other pre-treatments. In the sensory evaluation, the BNP was the best in overall acceptability. Thus, this study showed that the blanching treatment enhanced the antioxidant capacities and sensory qualities of the oriental melon wine.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.370-373
• /
• 1999

Si direct bonding (SDB) technology is very attractive for both Si-on-insulator(SOI) electric devices and MEMS applications because of its stress free structure and stability. This paper presents on- pre treatment conditions in Si wafer direct bonding, The paper resents on pre-bonding according to HF pre-treatment conditions in Si wafer direct bonding. The characteristics of bonded sample were measured under different bonding conditions of HF concentration, applied pressure and annealing temperature(200~ 100$0^{\circ}C$) after pre-bonding. The bonding strength was evaluated by tensile strength method. The bonded interface and the void were analyzed by using SEM and IR camera, respectively, Components existed in the interlayer were analyzed by using FT-IR. The bond strength depends on the HF pre-treatment condition before pre-bonding(Min 2.4kgf/$\textrm{cm}^2$~ Max : 14.kgf/$\textrm{cm}^2$)

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.9
• /
• pp.656-661
• /
• 2011

The performance of a domestic ceramic membrane with pore size of $0.1{\mu}m$ was evaluated to produce drinking water. A pilot-scale ceramic membrane filtration plant with a capacity of $1m^3/d$ was operated at the filtration flux of $3.0m^3/m^2{\cdot}d$ to investigate the effect of both backwash interval and pre-ozonation on TMP (trans-membrane pressure) increasing rate. The TMP increased with increasing the backwash interval. However, the application of pre-ozonation reduced the TMP increasing rate remarkably. When 1 mg/L of ozone was dosed with contact time of 5 min, TMP increasing rate at the backwash interval of 1 hr was reduced by 30%. This result indicated that pre-ozonation was very effective in reducing membrane fouling. There was almost no change in TMP increasing rate when the ozone contact time was maintained in the range of 5 to 15 min. Increasing ozone concentration up to 3 mg/L showed beneficial effect on TMP increasing rate.