• Journal of Preventive Medicine and Public Health
• /
• 제11권1호
• /
• pp.86-97
• /
• 1978

The mobile medical service has been operated for many years by a number of medical schools and hospitals as a most convenient means of medical service delivery to the people residing in such area where the geographical and socioeconomic conditions are not good enough to enjoy modern medical care. Despite of official appraisal showing off simply with numbers of outpatients treated and medical persons participated, however, as well recognized, the capability (in respect of budget, equipment and time) of those mobile medical teams is so limitted that it often discourages the recipients as well as medical participants themselves. In the midst of rising need to secure medical service of good quality to all parts of the country, and of developing concept of primary health care system, authors evaluated the effectiveness of and problems associated with mobile medical servies program through the community diagnosis of a village (Opo-myun, Kwangju-gun) to obtain the information which may be halpful for future improvement. 1. Owing to the nationwide Sae-Maul movement powerfully practiced during last several years, living environment of farm villages generally and remarkably improved including houses, water supply and wastes disposal etc. Neverthless, due to limitations in budget time and lack of knowledge (probably the most important), these improvements tend to keep up appearances only and are far from the goal which may being practical benefit in promoting the health of the community. 2. As a result of intensive population policy led by the government since 1962, there has been considerable advances in understanding and the rate of practicing family planning through out the villages and yet, one should see many things, especially education, to be done. Fifty eight per cent of mothers have not received prenatal check and the care for most (72%) delivery was offered by laymen at home. 3. Approximately seven per cent of the population was reported to have chronic illness but since only a few (practically none) of the people has had physical check up by doctors, the actual prevalence of chronic diseases may reach many times of the reported. The same fact was observed also in prevalence of tuberculosis; the patients registered at local health center totaled 31 comprising only 0.51% while the numbers in two neighboring villages (designated as demonstration area of tuberculosis control and mass examination was done recently) were 3.5 and 4.0% respectively. Prevalence rate of all dieseses and injuries expereinced during one month (July, 1977) was 15.8%. Only one tenth of those patients received treatment by physicians and one fifth was not treated at all. The situation was worse as for the chronic patients; 84% of all cases either have never been treated or discontinued therapy, and the main reasons were known to be financial difficulty and ignorance or indifference. 4. Among the patients treated by our mobile clinic, one third was chronic cases and 45% of all patients, by the opinion of doctors attended, were those who may be treated by specially trained nurses or other paramedics (objects of primary care). Besides, 20% of the cases required professional managements of level beyond the mobile team's capability and in this sense one may conclude that the effectiveness (performance) of present mobile medical team is quite limitted. According to above findings, the authors would like to suggest following for mobile medical service and overall medicare program for the people living in remote country side. 1. Establishment of primary health care system secured with effective communication and evacuation (between villages and local medical center) measures. 2. Nationwide enforcement of medical insurance system. 3. Simple outpatient care which now constitutes the main part of the most mobile medical services should largely be yielded up to primary health care unit of the village and the mobile team itself should be assigned on new and more urgent missions such as mass screening health examination of the villagers, health education with modern and effective audiovisual aids, professional training and consultant services for the primary health care organization.

• 한국의상디자인학회지
• /
• 제4권1호
• /
• pp.111-130
• /
• 2002

This study performed a structural questionnaire survey and non-structural interview of the ladies apparel manufacturers in Daegu on the qualification for the employees, skills required for job performance, job training, automatic manufacturing systems, and the use of computer. The results are as follows. 1. Almost all of the apparel manufacturing systems were Pair System, except one Line System in one company. In terms of outsourcing, most of the manufacturers answered “yes,” and in 1998 the outsourcing process was sewing, but in the year 2002, outsourcing has been increased :12 manufacturers(57.1%) outsourcing most of the processes except patterning, 3(14.3%) outsourcing the finish of sewing. 2. The workforce of 1998 and that of 2002 shows a significant difference(P＜. 01) between office work and management. The number of office workers has decreased from 15 down to 5.3 people. On the other hand, that of the management has slightly increased from 5.3 to 9.2 people. The number of the manual workers has decreased from 32.2 to 28.7 people. And the number of tailoring and patterning workers has slightly decreased, but the number has increased in sewing from 3.7 to 7.0 people. 3. The wage of an employee shows a significant difference between a sewing assistant(P＜. 01) and a production manager(P＜. 05), and the wage of a sewing assistant, in particular, has slightly raised from ￦905,000 to ￦1,054,000. 4. The qualifications required of employees are “cooperative human relations”(30.8％), “diligence,” and “ability for job analysis”(26.9％), and “positive thinking” (15.4％) in 1998, and “ability for job analysis”(38.5％), “cooperative human relations”(34.6％), and “positive thinking” (15.4％) in 2002. The areas for job openings are significantly different(P＜. 01) depending on the year. Job openings in the design section has increased from 1(3.8％) to 16 manufacturers (61.5％), and decreased in tailoring section from 22(84.6％) to 2 manufacturers(7.7％). Job openings in the sewing section have increased form 2(7.7％) to 6 manufacturers (23.1％). In terms of sex of the employees, there is a significant difference(P＜. 001). 19 companies(73.1％) wanted “male” in 1998, but 8 companies(30.8％) answered that they want “female” and 17 companies(65.4％) answered that “it does not matter.” About the educational background, there was a significant difference between the years. The number of the companies that want junior college graduates with an associate degree has increased(15 companies(57.7％). There was a significant difference(P＜. 05) in major of the employee. The number of the companies that want fashion majors has increased from 5(19.2％) to 20(76.9％). 5. In terms of job skills required, there was no significant difference. In 1998, “production skills” (46.2％) and “ability for job analysis” (26.9％) were required, and in 2002, “ability for job analysis” (42.3％) and “emotional skills” (26.9％). 6. In regard to training for job skills, “fashion professional training” has slightly decreased from 65.4％ in 1998 to 46.2％ in 2002, however, “training for job analysis” has slightly increased from 30.8％ in 1998 to 46.2％ in 2002, which indicates the fact that “fashion professional training” and “ability for job analysis” have been emphasized. 7. The number of the manufacturers purchased apparel CAD has increased from 1(3.8％) to 3(11.5％), and the number of the manufacturers that have no plan for purchase has increased from 16(61.5％) in 1998 to 15(57.7％), still taking up a big proportion. 8. About the use of computers in manufacturing, there is a significant difference(P＜. 05). The number of the manufacturers using computer has increased from 5(19.2％) to 15(57.7％) and that of the manufacturers which do not use computers has decreased from 17(57.7％) to 8(30.8％). 9. In the interviews with the owners of the manufacturers, they pointed that schools should give more weight on practical training courses, the invitation of experts in the specific field, complex production systems, training courses for sewing, field trip courses, and furthering specialty education, personality and vocational education.

• Journal of Biosystems Engineering
• /
• 제2권1호
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• Radiation Oncology Journal
• /
• 제27권2호
• /
• pp.91-102
• /
• 2009

목 적: 세기조절방사선치료에 있어서 치료 전 환자별 정도관리(QA)에 사용하는 EDR2 필름과 2차원 이온전리함배열(MatriXX), 그리고 전자포탈영상장치(EPID)에 대해 절대선량계와 상대선량계로서의 정확도와 효율성을 평가했다. 대상 및 방법: 6 MV X-선을 이용하여 두 가지 유형(기준 조사면, 오차 평가 조사면)의 세기조절 조사면을 설계하고 EDR2 필름, MatriXX, EPID를 사용하여 절대선량과 상대적 선량분포를 비교, 분석했다. 세 시스템의 절대선량 정확성을 평가하기 위해 세 시스템의 선량 측정값과 전리함 측정값을 비교했고, 상대적 선량분포 평가를 위해 기준 조사면과 의도적으로 MLC leaf 위치를 변형시킨 오차 평가 조사면에서 감마($\gamma$)값과 조사면 수직 프로파일을 분석했다. 또한, 환자별 QA 전 과정을 수행하는데 소요되는 시간을 측정하여 시스템에 따른 업무 부하를 비교했다. 결 과: EDR2 필름, MatriXX, 그리고 EPID의 절대선량 측정값과 전리함 측정값을 비교한 결과 EPID는 1%, MatriXX는 2%, EDR2 필름은 3% 이내의 오차 측정 정확도를 보였다. EDR2 필름과 EPID는 허용기준 3%/3 mm와 2%/2 mm 모두에서 감마값이 1을 초과하는 화소($\gamma$%>1)가 전체 화소의 2% 이내였다. 그러나 MatriXX의 경우 3%/3 mm에서는 1% 이내의 오차를 보였으나 2%/2 mm를 적용한 $10\times20\;cm^2$와 $10\times10\;cm^2$에서는 각각 5.94%와 4.95%로 증가했다. 세 시스템으로부터 얻은 오차 평가 조사면의 선량 분포를 치료계획 장치로부터 얻은 기준 조사면과 중첩하여 감마 분석한 결과, 3%/3 mm에서 EDR2 필름이 -4 mm의 MLC leaf 오차 식별이 가능했고 EPID는 -3 mm 오차를 감지했다. 2%/2 mm의 경우, EDR2 필름과 EPID에서 각각 -3 mm와 -2 mm의 오차 식별이 가능했다. 그러나 MatriXX의 경우 경계가 불분명해 오차 구분이 어려웠다. 환자별 QA 전 과정을 수행하는데 소요되는 시간은 EDR2 필름이 약 110분, MatriXX가 약 80분, EPID가 약 55분이었다. 결 론: 본 연구는 IMRT의 치료 전 환자별 QA를 위한 EDR2 필름, MatriXX, 그리고 EPID의 측정 정확도와 효율성을 분석했다. EDR2 필름과 EPID는 선량 측정 정확도가 우수했으며, MatriXX는 측정 시간이 짧았다. 본 연구 결과는 임상에서 효율적인 IMRT QA 시스템을 구축하는데 좋은 자료가 될 것으로 생각한다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1153-1153
• /
• 2001

Directive 79/373/EEC on the marketing of compound feeding stuffs, provided far a flexible declaration arrangement confined to the indication of the feed materials without stating their quantity and the possibility was retained to declare categories of feed materials instead of declaring the feed materials themselves. However, the BSE (Bovine Spongiform Encephalopathy) and the dioxin crisis have demonstrated the inadequacy of the current provisions and the need of detailed qualitative and quantitative information. On 10 January 2000 the Commission submitted to the Council a proposal for a Directive related to the marketing of compound feeding stuffs and the Council adopted a Common Position (EC N$^{\circ}$/2001) published at the Official Journal of the European Communities of 2. 2. 2001. According to the EC (EC N$^{\circ}$ 6/2001) the feeds material contained in compound feeding stufs intended for animals other than pets must be declared according to their percentage by weight, by descending order of weight and within the following brackets (I :< 30%; II :> 15 to 30%; III :> 5 to 15%; IV : 2% to 5%; V: < 2%). For practical reasons, it shall be allowed that the declarations of feed materials included in the compound feeding stuffs are provided on an ad hoc label or accompanying document. However, documents alone will not be sufficient to restore public confidence on the animal feed industry. The objective of the present work is to obtain calibration equations fur the instanteneous and simultaneous prediction of the chemical composition and the percentage of ingredients of unground compound feeding stuffs. A total of 287 samples of unground compound feeds marketed in Spain were scanned in a FOSS-NIR Systems 6500 monochromator using a rectangular cup with a quartz window (16 $\times$ 3.5 cm). Calibration equations were obtained for the prediction of moisture ($R^2$= 0.84, SECV = 0.54), crude protein ($R^2$= 0.96, SECV = 0.75), fat ($R^2$= 0.86, SECV = 0.54), crude fiber ($R^2$= 0.97, SECV = 0.63) and ashes ($R^2$= 0.86, SECV = 0.83). The sane set of spectroscopic data was used to predict the ingredient composition of the compound feeds. The preliminary results show that NIRS has an excellent ability ($r^2$$\geq$ 0, 9; RPD $\geq$ 3) for the prediction of the percentage of inclusion of alfalfa, sunflower meal, gluten meal, sugar beet pulp, palm meal, poultry meal, total meat meal (meat and bone meal and poultry meal) and whey. Other equations with a good predictive performance ($R^2$$\geq$0, 7; 2$\leq$RPD$\leq$3) were the obtained for the prediction of soya bean meal, corn, molasses, animal fat and lupin meal. The equations obtained for the prediction of other constituents (barley, bran, rice, manioc, meat and bone meal, fish meal, calcium carbonate, ammonium clorure and salt have an accuracy enough to fulfill the requirements layed down by the Common Position (EC Nº 6/2001). NIRS technology should be considered as an essential tool in food Safety Programs.

• 한국의류학회지
• /
• 제30권12호
• /
• pp.1747-1758
• /
• 2006

정보기술의 급격한 발전은 새로운 시장환경인 인터넷 쇼핑몰의 증가에 영향을 미쳤다. 인터넷 쇼핑몰은 소비자 관여와 같은 소비자 행동을 변화시켰고, 이에 따라 마케터들은 인터넷 상에서 소비자들이 의류제품을 구매할 때 중요시하는 제품 평가기준 및 점포 평가기준에 관심을 가지게 되었다. 따라서 본 연구는 인터넷 쇼핑몰 이용자의 소비자관여와 인터넷 사용능력에 따라 소비자 집단을 분류하여 인터넷 상에서 각 소비자 집단에 따른 의류제품 및 웹 서비스 평가기준의 차이를 알아보았다. 본 연구의 연구대상은 인터넷 쇼핑몰에서 의류제품 구매경험이 있으며, 수도권에 거주하는 $20\sim30$대 성인남녀로 판단표본 추출하였다. 설문지 방식을 사용해 자료를 수집, 총 305부를 분석에 사용하였으며, 소비자관여와 의류제품 평가기준 및 웹 서비스 평가기준을 측정하기 위한 변수들은 기존 선행연구들에서 조사한 후 본 연구에 맞도록 재구성하였다. 자료의 분석은 요인분석, 일원분산분석, Duncan test를 실시하였다. 인터넷 쇼핑몰 이용자의 소비자집단 유형은 소비자관여와 인터넷 사용능력을 기준으로 네 집단으로 분류하였으며, 쇼핑몰 이용자의 소비자집단에 따른 의류제품 평가기준의 차이를 알아본 결과, 심미적, 품질성능적, 그리고 외재적 기준 모두에서 집단간 유의미한 차이가 나타났다. 또한 인터넷 쇼핑몰 소비자집단 유형에 따른 웹 서비스 평가기준의 차이는 신뢰성, 제품관련, 거래 후 만족, 그리고 판촉/정책 기준에서 집단간 유의미한 차이가 나타났다. 의류제품 및 웹 서비스 평가기준 모두에서 고관여고능력 집단과 고관여저능력 집단은 동질집단으로서 다른 집단에 비해 두 평가기준 모두를 중요시하는 것으로 나타났다. 즉 고관여 소비자들은 인터넷 쇼핑 시 발생할 수 있는 여러 가지 위험요소들에 대해 크게 지각하고 있어 평가기준 모두를 중요시하므로, 인터넷 쇼핑몰은 고관여 소비자집단을 만족시킬 수 있는 의류제품을 구비하도록 해야 하며, 그들이 느끼는 위험요소를 찾아 없애는데 주력하여야 할 것이다. 또한 신속 정확한 약속의 이행 등을 통해 쇼핑몰 업체의 이미지를 향상시켜야 할 것이고 거래 후에도 제품의 교환이나 반품 및 환불에 대해서도 끝까지 책임을 짐으로써 고객에게 만족을 주어야 한다.

• Ecology and Resilient Infrastructure
• /
• 제2권4호
• /
• pp.265-273
• /
• 2015

생물다양성을 감소시키고 인간에게 경제적 손실을 불러오는 침입외래생물은 사전에 자연으로의 유입 차단이 최선이지만, 유입과 억제에 실패한 경우 적극적으로 구제하거나 퇴치해야 한다. 본 연구에서는 영국과 미국에서 실시된 뉴트리아 박멸 사례를 소개하고, 국내 뉴트리아 관리체계 개선에 기여할 수 있는 정보를 제공하고자 하였다. 영국의 박멸캠페인은 관리의 목적과 목표에 대한 완전한 이해를 바탕으로 장기적인 계획을 수립하였고 적합한 지원을 확보하였다. 뉴트리아에 대한 충분한 정보를 축적하고 관리 여건의 변화에 따라 관리전략을 수정하였으며, 현장에 반영하였다. 미국의 체사피크만 박멸 프로젝트는 장기간의 생태정보를 바탕으로 영국에 비해 발전된 포획 기술을 적용하였으며, 영국 박멸캠페인 성과를 분석하여 박멸계획과 전략, 실행방안을 도출하였다. 국내 서식하는 뉴트리아를 효과적으로 관리하기 위해서는 다음과 같은 사항을 제안할 수 있다. 첫째, 퇴치 필요성에 대하여 이해당사자간 공감으로 협의체를 구성하고 주기적으로 생태적 정보와 의견을 교환한다. 둘째, 현장의 의견을 적극 수렴하여 퇴치전략과 관리정책에 반영한다. 관리지표를 기반으로 퇴치계획을 수립하고, 성과를 평가하고, 성과에 따라 조정하는 모든 과정은 유기적으로 연계되도록 한다. 셋째, 과학적인 관리방법을 도입하고 관리성과는 객관적으로 평가하며, 실천계획은 서식실태 모니터링을 통해 가변적으로 조정한다. 넷째, 장기적인 예산과 안정적인 조직을 확보하고 퇴치 효율성이 높은 시기에 재원을 집중하여 투입한다. 이러한 시사점은 국내 뉴트리아 관리방식을 효율적으로 개선하고 체계적이고 장기적인 관리를 지속하는데 도움이 될 수 있다.

• 대한공업교육학회지
• /
• 제36권2호
• /
• pp.131-150
• /
• 2011

이 연구의 목적은 일반고등학교 직업 과정의 효율적인 운영을 위하여 각 시 도별 일반고등학교 직업 과정 운영 현황과 실태 분석을 통하여 일반고등학교 직업 과정 운영의 문제점을 파악하고, 그 개선 방안을 도출하기 위한 것이다. 일반고등학교에서의 바람직한 운영 방향으로는 일반고 직업과정 운영 목적에 부합하는 학생을 선발하는 것으로서, 학생 선발할 때 정확한 홍보와 진로 지도가 필요하며, 일반고 직업 과정 담당교사가 직업 과정의 운영 취지를 올바로 인식하고, 학생 진로지도와 직업 과정을 효과적으로 운영할 수 있도록 시 도교육청 차원에서 체계적인 연수를 실시할 필요가 있다. 또한 일반고 직업 과정 대상 학생이 소속교(원적교) 에서 이수 하여야 하는 교육과정에 대해 학교 교육계획서에 명시하여 실천할 필요가 있으며, 일반고 직업 과정 학생은 별도의 학급을 구성하여 운영하는 것이 가장 바람직하다. 대상 인원이 소수일 경우, 권역별로 1학급을 만들어 운영하는 방안도 고려해 볼 필요가 있다. 위탁 교육 기관의 주요 실적에 대한 개선 방향으로 취업률 향상을 위해서는 학생 선발 시 홍보 자료로 대학 진학률 보다는 취업률 자료를 활용하여 학생 및 학부모에게 일반고 직업 과정의 목적과 취지에 대한 정확한 정보를 제공할 필요가 있다. 또한 취업률이 상대적으로 낮은 산업(정보) 학교에서는 취업 전담부서를 설치하고, 취업 담당자(산학협력 코디네이터) 등을 배치하여, 취업 경로와 산업체를 확보하고 산업체의 요구와 학생이 희망하는 근무조건 등을 조정하는 역할을 담당하도록 하며, 산업체 대학(2년제) 산업(정보) 학교의 협약을 통하여 선취업 후진학 제도를 적극 홍보 활용하기를 권장할 필요가 있다. 일반고 직업 과정 코스의 신설 및 폐지에 있어, 일부 인기 코스의 경우 오히려 취업과 거리가 먼 경우가 있으므로, 코스를 신설하거나 폐지할 경우 변화하는 산업사회의 수요를 반영하고 취업과 연결될 수 있는지를 면밀히 검토하여 신중히 결정해야 한다. 위탁 교육 기관에 대한 체게적인 질 관리 측면에서, 산업(정보) 학교와 공공 직업훈련 기관이 민간 직업 전문학교이나 학원에 비해 우수하다. 그러나 전국의 16개 시 도 중 대도시를 중심으로 5개 시에만 산업정보학교가 있다. 일반고 직업 과정이 지속적으로 수요가 예상되는 시 도의 경우, 운영면에서 여러 가지로 비교 우위에 있는 산업정보 학교의 신설을 고려해 볼 필요가 있다.

• 간호행정학회지
• /
• 제3권1호
• /
• pp.119-133
• /
• 1997

Continuing shift service of clinical nurses can be not only the cause of occupational dissatisfaction by being connected with the change of circadian rhythm and the burden of duties to be applicable to such changes. But also of inviting the lowering of nursing quality by being affected to the resignation of the nurses as the threat to the health of the nurses. This study has selected 500 nurses at random under non-probability sampling who have been serving by shift in 7 general hospitals which have over 400 sickbeds for the purpose of cross-sectional survey design from Sep. 7 through 20, 1996. Standardized modification of the CMI has been used which was designed for Koreans with Cornell Medical Index developed by Broadman and his fellow workers as the study device. The structure of the device was composed of 35 questions on physical appeal(Chronbach's ${\alpha}=8507$) and 22 questions of mental appeal(Cronbach's ${\alpha}=.8166$ totalling 57 questions. The collected data has been computerrized by using SPSS. General character, present symptom, perceived symptom and others are sought by practical number and percentage, and the health condition comparison followed by general characters was conducted by t-test and ANOVA. The post test was by Duncan's test by the level of p<.05. 1) The items of the answer that they have the physical symptom presently by 50% or over of the nurses were as "Do you often have spells of severe dizziness", "Are your eyes often red or inflamed", "Does press or pain in the head often make like miserable", "Are your ankles often badly swollen", "Do pains in the back make it hard for you to keep up with your work". 2) The items of the answer by over 50% of the nurses as the mental symptom at present were "do you fell bad when criticized?", "Do you get angry when everything is against your will?", "do you get angry when ordered to do this and that?", "do you feel uneasy by such a trifle thing?", "do you tremble or are you freightened by sudden sound?". The mental and physical symptoms which have appeared presently in connection with the shift service have been agreed with each other. But the physical condition has been worse than the mental one. 3) In the physical health conditions followed by demosociological character, there were the significant differences by sex, religion and place of residence(p<.05), and in the mental health conditions, there were the significant differences by age, marital status, residence place and the required time for attending hospital(p<.05). 4) There was significant difference by the degree of satisfaction about the duty in both the physical and mental health conditions. In short, the higher the degree of duty satisfaction, the better the health conditions. 5) There were the significant difference according to the times of night duty and whether they take the drug or not or the kinds of the drugs in the physical health conditions related with the characters of night shift. Mental health conditions in the night shift case showed significant differences according to their taking drug or not or the kinds of the drugs(p<.05). I can confirm that the nurses have been affected continuously by the shift service mentally and physically. The maintenance of the physical and mental health of the nurses and its promotion are very important problem to guarantee the quality nursing in the performance of the nursing service continuously and effectively, so the hospital should make every effort to improve the duty conditions by finding out the causes affecting to their health. In the nursing management viewpoint, I think that elevating the satisfaction degree about the duty would be a great help to the promotion of physical and mental health conditions. But what is most important is that the nurses themselves should take care of themselves in maintaining the good conditions in their service in the hospital.

• 한국가정과교육학회지
• /
• 제17권2호
• /
• pp.197-219
• /
• 2005

본 연구는 실업계열 전문 과목 중에서 범계열적으로 선택 이수되고 있는 식품과 영양 과목의 성취기준 및 평가기준을 국가 교육과정에 근거하여 개발하고, 활용 가능한 예시 평가 도구를 개발하여 식품과 영양 과목 교육과정 운영의 내실화와 평가 기반 구축에 목적 두고 수행하였다. 주요 연구 결과로는 먼저 문헌 및 자료 분석을 통해 성취기준 및 평가기준의 개념과 필요성, 식품과 영양 과목의 성취기준 및 평가기준, 예시 평가도구 개발에 적용될 개발 절차와 제시 모형 등을 고찰하였다. 두 번째로는 식품과 영양 과목의 교육과정 및 교과서 내용 체계를 분석하여 성취기준 및 평가기준 개발을 위한 내용 요소를 6개 대영역, 32개 중영역, 70개의 내용 요소로 선정 구성하였다. 성취기준은 이 내용 요소에 기초를 두고 내용 특성과 학습자의 도달점 행동을 고려하여 총 89개로 세분화하여 개발하였다. 또한 평가기준은 각 성취기준을 기초로 성취수준과 활동 수준에 차이를 두어 상${\cdot}$중${\cdot}$하 3단계로 제시하였다. 셋째, 예시 평가도구는 개발한 성취기준과 평가기준의 구체적인 예로서 단위학교의 실정에 맞게 적절하게 변형하여 사용할 수 있는 참고 자료임을 전제로 개발하였으며 서술형, 보고서법, 실험${\cdot}$실습법, 포트폴리오, 단답형 등의 유형을 적용하여 총 100개 문항을 개발하였다. 끝으로 개발한 식품과 영양 과목의 성취기준 및 평가기준, 예시평가 도구를 단위학교 수준에서 효과적으로 활용할 수 있는 방안을 제시하였다.