• Journal of Preventive Medicine and Public Health
• /
• v.11 no.1
• /
• pp.86-97
• /
• 1978

The mobile medical service has been operated for many years by a number of medical schools and hospitals as a most convenient means of medical service delivery to the people residing in such area where the geographical and socioeconomic conditions are not good enough to enjoy modern medical care. Despite of official appraisal showing off simply with numbers of outpatients treated and medical persons participated, however, as well recognized, the capability (in respect of budget, equipment and time) of those mobile medical teams is so limitted that it often discourages the recipients as well as medical participants themselves. In the midst of rising need to secure medical service of good quality to all parts of the country, and of developing concept of primary health care system, authors evaluated the effectiveness of and problems associated with mobile medical servies program through the community diagnosis of a village (Opo-myun, Kwangju-gun) to obtain the information which may be halpful for future improvement. 1. Owing to the nationwide Sae-Maul movement powerfully practiced during last several years, living environment of farm villages generally and remarkably improved including houses, water supply and wastes disposal etc. Neverthless, due to limitations in budget time and lack of knowledge (probably the most important), these improvements tend to keep up appearances only and are far from the goal which may being practical benefit in promoting the health of the community. 2. As a result of intensive population policy led by the government since 1962, there has been considerable advances in understanding and the rate of practicing family planning through out the villages and yet, one should see many things, especially education, to be done. Fifty eight per cent of mothers have not received prenatal check and the care for most (72%) delivery was offered by laymen at home. 3. Approximately seven per cent of the population was reported to have chronic illness but since only a few (practically none) of the people has had physical check up by doctors, the actual prevalence of chronic diseases may reach many times of the reported. The same fact was observed also in prevalence of tuberculosis; the patients registered at local health center totaled 31 comprising only 0.51% while the numbers in two neighboring villages (designated as demonstration area of tuberculosis control and mass examination was done recently) were 3.5 and 4.0% respectively. Prevalence rate of all dieseses and injuries expereinced during one month (July, 1977) was 15.8%. Only one tenth of those patients received treatment by physicians and one fifth was not treated at all. The situation was worse as for the chronic patients; 84% of all cases either have never been treated or discontinued therapy, and the main reasons were known to be financial difficulty and ignorance or indifference. 4. Among the patients treated by our mobile clinic, one third was chronic cases and 45% of all patients, by the opinion of doctors attended, were those who may be treated by specially trained nurses or other paramedics (objects of primary care). Besides, 20% of the cases required professional managements of level beyond the mobile team's capability and in this sense one may conclude that the effectiveness (performance) of present mobile medical team is quite limitted. According to above findings, the authors would like to suggest following for mobile medical service and overall medicare program for the people living in remote country side. 1. Establishment of primary health care system secured with effective communication and evacuation (between villages and local medical center) measures. 2. Nationwide enforcement of medical insurance system. 3. Simple outpatient care which now constitutes the main part of the most mobile medical services should largely be yielded up to primary health care unit of the village and the mobile team itself should be assigned on new and more urgent missions such as mass screening health examination of the villagers, health education with modern and effective audiovisual aids, professional training and consultant services for the primary health care organization.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.4 no.1
• /
• pp.111-130
• /
• 2002

This study performed a structural questionnaire survey and non-structural interview of the ladies apparel manufacturers in Daegu on the qualification for the employees, skills required for job performance, job training, automatic manufacturing systems, and the use of computer. The results are as follows. 1. Almost all of the apparel manufacturing systems were Pair System, except one Line System in one company. In terms of outsourcing, most of the manufacturers answered “yes,” and in 1998 the outsourcing process was sewing, but in the year 2002, outsourcing has been increased :12 manufacturers(57.1%) outsourcing most of the processes except patterning, 3(14.3%) outsourcing the finish of sewing. 2. The workforce of 1998 and that of 2002 shows a significant difference(P＜. 01) between office work and management. The number of office workers has decreased from 15 down to 5.3 people. On the other hand, that of the management has slightly increased from 5.3 to 9.2 people. The number of the manual workers has decreased from 32.2 to 28.7 people. And the number of tailoring and patterning workers has slightly decreased, but the number has increased in sewing from 3.7 to 7.0 people. 3. The wage of an employee shows a significant difference between a sewing assistant(P＜. 01) and a production manager(P＜. 05), and the wage of a sewing assistant, in particular, has slightly raised from ￦905,000 to ￦1,054,000. 4. The qualifications required of employees are “cooperative human relations”(30.8％), “diligence,” and “ability for job analysis”(26.9％), and “positive thinking” (15.4％) in 1998, and “ability for job analysis”(38.5％), “cooperative human relations”(34.6％), and “positive thinking” (15.4％) in 2002. The areas for job openings are significantly different(P＜. 01) depending on the year. Job openings in the design section has increased from 1(3.8％) to 16 manufacturers (61.5％), and decreased in tailoring section from 22(84.6％) to 2 manufacturers(7.7％). Job openings in the sewing section have increased form 2(7.7％) to 6 manufacturers (23.1％). In terms of sex of the employees, there is a significant difference(P＜. 001). 19 companies(73.1％) wanted “male” in 1998, but 8 companies(30.8％) answered that they want “female” and 17 companies(65.4％) answered that “it does not matter.” About the educational background, there was a significant difference between the years. The number of the companies that want junior college graduates with an associate degree has increased(15 companies(57.7％). There was a significant difference(P＜. 05) in major of the employee. The number of the companies that want fashion majors has increased from 5(19.2％) to 20(76.9％). 5. In terms of job skills required, there was no significant difference. In 1998, “production skills” (46.2％) and “ability for job analysis” (26.9％) were required, and in 2002, “ability for job analysis” (42.3％) and “emotional skills” (26.9％). 6. In regard to training for job skills, “fashion professional training” has slightly decreased from 65.4％ in 1998 to 46.2％ in 2002, however, “training for job analysis” has slightly increased from 30.8％ in 1998 to 46.2％ in 2002, which indicates the fact that “fashion professional training” and “ability for job analysis” have been emphasized. 7. The number of the manufacturers purchased apparel CAD has increased from 1(3.8％) to 3(11.5％), and the number of the manufacturers that have no plan for purchase has increased from 16(61.5％) in 1998 to 15(57.7％), still taking up a big proportion. 8. About the use of computers in manufacturing, there is a significant difference(P＜. 05). The number of the manufacturers using computer has increased from 5(19.2％) to 15(57.7％) and that of the manufacturers which do not use computers has decreased from 17(57.7％) to 8(30.8％). 9. In the interviews with the owners of the manufacturers, they pointed that schools should give more weight on practical training courses, the invitation of experts in the specific field, complex production systems, training courses for sewing, field trip courses, and furthering specialty education, personality and vocational education.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• Radiation Oncology Journal
• /
• v.27 no.2
• /
• pp.91-102
• /
• 2009

Purpose: To compare the accuracy and efficacy of EDR2 film, a 2D ionization chamber array (MatriXX) and an amorphous silicon electronic portal imaging device (EPID) in the pre-treatment QA of IMRT. Materials and Methods: Fluence patterns, shaped as a wedge with 10 steps (segments) by a multi-leaf collimator (MLC), of reference and test IMRT fields were measured using EDR2 film, the MatriXX, and EPID. Test fields were designed to simulate leaf positioning errors. The absolute dose at a point in each step of the reference fields was measured in a water phantom with an ionization chamber and was compared to the dose obtained with the use of EDR2 film, the MatriXX and EPID. For qualitative analysis, all measured fluence patterns of both reference and test fields were compared with calculated dose maps from a radiation treatment planning system (Pinnacle, Philips, USA) using profiles and $\gamma$ evaluation with 3%/3 mm and 2%/2 mm criteria. By measurement of the time to perform QA, we compared the workload of EDR2 film, the MatriXX and EPID. Results: The percent absolute dose difference between the measured and ionization chamber dose was within 1% for the EPID, 2% for the MatriXX and 3% for EDR2 film. The percentage of pixels with $\gamma$%>1 for the 3%/3 mm and 2%/2 mm criteria was within 2% for use of both EDR2 film and the EPID. However, differences for the use of the MatriXX were seen with a maximum difference as great as 5.94% with the 2%/2 mm criteria. For the test fields, EDR2 film and EPID could detect leaf-positioning errors on the order of -3 mm and -2 mm, respectively. However it was difficult to differentiate leaf-positioning errors with the MatriXX due to its poor resolution. The approximate time to perform QA was 110 minutes for the use of EDR2 film, 80 minutes for the use of the MatriXX and approximately 55 minutes for the use of the EPID. Conclusion: This study has evaluated the accuracy and efficacy of EDR2 film, the MatriXX and EPID in the pre-treatment verification of IMRT. EDR2 film and the EPID showed better performance for accuracy, while the use of the MatriXX significantly reduced measurement and analysis times. We propose practical and useful methods to establish an effective QA system in a clinical environment.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1153-1153
• /
• 2001

Directive 79/373/EEC on the marketing of compound feeding stuffs, provided far a flexible declaration arrangement confined to the indication of the feed materials without stating their quantity and the possibility was retained to declare categories of feed materials instead of declaring the feed materials themselves. However, the BSE (Bovine Spongiform Encephalopathy) and the dioxin crisis have demonstrated the inadequacy of the current provisions and the need of detailed qualitative and quantitative information. On 10 January 2000 the Commission submitted to the Council a proposal for a Directive related to the marketing of compound feeding stuffs and the Council adopted a Common Position (EC N$^{\circ}$/2001) published at the Official Journal of the European Communities of 2. 2. 2001. According to the EC (EC N$^{\circ}$ 6/2001) the feeds material contained in compound feeding stufs intended for animals other than pets must be declared according to their percentage by weight, by descending order of weight and within the following brackets (I :< 30%; II :> 15 to 30%; III :> 5 to 15%; IV : 2% to 5%; V: < 2%). For practical reasons, it shall be allowed that the declarations of feed materials included in the compound feeding stuffs are provided on an ad hoc label or accompanying document. However, documents alone will not be sufficient to restore public confidence on the animal feed industry. The objective of the present work is to obtain calibration equations fur the instanteneous and simultaneous prediction of the chemical composition and the percentage of ingredients of unground compound feeding stuffs. A total of 287 samples of unground compound feeds marketed in Spain were scanned in a FOSS-NIR Systems 6500 monochromator using a rectangular cup with a quartz window (16 $\times$ 3.5 cm). Calibration equations were obtained for the prediction of moisture ($R^2$= 0.84, SECV = 0.54), crude protein ($R^2$= 0.96, SECV = 0.75), fat ($R^2$= 0.86, SECV = 0.54), crude fiber ($R^2$= 0.97, SECV = 0.63) and ashes ($R^2$= 0.86, SECV = 0.83). The sane set of spectroscopic data was used to predict the ingredient composition of the compound feeds. The preliminary results show that NIRS has an excellent ability ($r^2$$\geq$ 0, 9; RPD $\geq$ 3) for the prediction of the percentage of inclusion of alfalfa, sunflower meal, gluten meal, sugar beet pulp, palm meal, poultry meal, total meat meal (meat and bone meal and poultry meal) and whey. Other equations with a good predictive performance ($R^2$$\geq$0, 7; 2$\leq$RPD$\leq$3) were the obtained for the prediction of soya bean meal, corn, molasses, animal fat and lupin meal. The equations obtained for the prediction of other constituents (barley, bran, rice, manioc, meat and bone meal, fish meal, calcium carbonate, ammonium clorure and salt have an accuracy enough to fulfill the requirements layed down by the Common Position (EC Nº 6/2001). NIRS technology should be considered as an essential tool in food Safety Programs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.12 s.159
• /
• pp.1747-1758
• /
• 2006

Rapid development of the information technology has influenced on the changes in every sector of human environments. One prominent change in retail market is an increase of electronic stores, which has prompted practical and research interest in the product and store attributes that include consumer to purchase products from the electronic shopping. Therefore many marketers are paying much attention to the criteria of evaluating clothing and web service on internet shopping malls. The purpose of this study is to examine differences of clothing and web service criteria of consumer groups (High-Involvement & High-Ability, Low-Involvement & High-Ability, High-Involvement & Low-Ability, and Low-Involvement & Low-Ability) who are classified into consumer involvement and internet use ability. The subjects of this study were 305 people aged between 19 and 39s, living in Seoul and Gyeonggi-do area, and having experiences in buying products on the internet shopping. Statistical analyses used for this study were the frequency, percentage, factor analysis, ANOVA and Duncan test. The results of this study were as follows: Regarded on the criteria of evaluating clothing, the low different groups had significant differences in the esthetic, the quality performance and the extrinsic criterion. Both HIHA group and HILA group showed the similar results. They considered every criterion of evaluating clothing more important, compared with other groups. Regarded on the criteria of evaluating web service related to the low different groups, there were significant differences in the factors related to the shopping mall reliance, the product, the satisfaction after purchase, and the promotion and policy criterion. Both HIHA group and HILA group showed the similar results as well. They considered every criterion of evaluating web service more important, compared with other groups. In conclusion, HI groups perceive relatively more dangerous factors which can be occurred during internet shopping. Therefore, internet shopping malls need to provide clothing that can satisfy the HI groups as well as make efforts to remove the dangerous factors on the internet.

• Ecology and Resilient Infrastructure
• /
• v.2 no.4
• /
• pp.265-273
• /
• 2015

It is the better to take preventative measures against the natural intrusion in advance from invasive alien species that reduce biodiversity and cause economic loss to humans. If the prevention of intrusion and spread fails, we need to make active control and eradication. This study aims to introduce nutria (Myocastor coypus) control cases performed in the United Kingdom and the United States and to provide information for the contribution of nutria management measure improvements. The nutria eradication campaign in the United Kingdom was developed as a long-term plan based on sufficient understanding on the management target and objective and suitable support. Sufficient information on nutria was accumulated and the management strategy was flexibly modified according to the changes in management that were proactively reflected in the field. Regarding the eradication project at Chesapeake Bay in the United States, based on long-term ecological information, more advanced capture technology than in the United Kingdom were introduced and the eradication plan, strategy and implementation were configured by analyzing the strengths and weaknesses of the eradication campaign in the United Kingdom. The successful cases in the United Kingdom and the United State provide an information on how to improv the nutria management measure. For the eradication of nutria, it is necessary to reach a consensus between stakeholders and to form a consultative group between related organizations for periodic communication. Opinions on the field must be actively accepted in the consultation process for strategy and policy decision, and the eradication plan needs to be developed based on a management index. The eradication plan is required to be managed, evaluated and adjusted in a systematic way. Scientific management must be introduced and the management performance must be evaluated objectively so that a practical plan can be flexibly adjusted. It is also required to secure a long-term budget support and a stable organization and to input a concentrated budget at the proper period when there is high efficiency of eradication.

• 대한공업교육학회지
• /
• v.36 no.2
• /
• pp.131-150
• /
• 2011

The purpose of this study vocational courses in general high schools in each city in order to operate efficiently. Provinces operating status and the general high school vocational courses through the regular high school vocational courses siltae analysis to identify operational problems, and that is to derive ways to improve. Operating in the desired direction, the typical high school vocational courses ilbango select students that meet the purpose of operating as one that students admit you need the correct promotion and career guidance and vocational courses ilbango teachers of vocational courses is operating correctly recognize the purpose and students with career guidance and vocational courses so that you can operate effectively at: Provincial Office-wide need to conduct a systematic study. Vocational courses also target students ilbango sosokgyo (wonjeokgyo) to be completed in the course stated in the plan for the school and the need to practice, and professional students ilbango by configuring a separate class is most preferable to operate. If the person is prime target, with each region run by creating a class needs to definitely consider. Entrusted to the agency's key performance improvements in order to improve the employment rate in the direction of promotional materials for the students selected to take advantage of college enrollment than the employment data for the students and their parents ilbango vocational courses for the purpose and intent is necessary to provide accurate information In addition, the employment rate is relatively low industrial (information) to install the school department employment, and employment representatives (industry-academia co-coordinator), and by placing career paths and industries to ensure the needs of industry, including working conditions and students who wish adjusting to the role, and industrial college (2 years), industrial (information) through the school's agreement to the aggressive promotional schemes seonchwieop hujinhak. Getting the need to encourage. Vocational courses ilbango in the new and the abolition, rather than the case of some popular course when you are away from work and there, so if the course-changing industry, new or repealed to reflect the demands of social work and careful review of how to connect carefully to decide by. Commissioned a systematic quality management in education, in terms of industry (information) schools and public vocational training institutions or private vocational school is better than school. However, 16 cities across the country. Also only five of the major cities around the school has industry information. Ilbango vocational courses at the expected continued demand. Degrees, the operation in terms of comparative advantage in many ways the school's new industry information is necessary to consider.

• Journal of Korean Academy of Nursing Administration
• /
• v.3 no.1
• /
• pp.119-133
• /
• 1997

Continuing shift service of clinical nurses can be not only the cause of occupational dissatisfaction by being connected with the change of circadian rhythm and the burden of duties to be applicable to such changes. But also of inviting the lowering of nursing quality by being affected to the resignation of the nurses as the threat to the health of the nurses. This study has selected 500 nurses at random under non-probability sampling who have been serving by shift in 7 general hospitals which have over 400 sickbeds for the purpose of cross-sectional survey design from Sep. 7 through 20, 1996. Standardized modification of the CMI has been used which was designed for Koreans with Cornell Medical Index developed by Broadman and his fellow workers as the study device. The structure of the device was composed of 35 questions on physical appeal(Chronbach's ${\alpha}=8507$) and 22 questions of mental appeal(Cronbach's ${\alpha}=.8166$ totalling 57 questions. The collected data has been computerrized by using SPSS. General character, present symptom, perceived symptom and others are sought by practical number and percentage, and the health condition comparison followed by general characters was conducted by t-test and ANOVA. The post test was by Duncan's test by the level of p<.05. 1) The items of the answer that they have the physical symptom presently by 50% or over of the nurses were as "Do you often have spells of severe dizziness", "Are your eyes often red or inflamed", "Does press or pain in the head often make like miserable", "Are your ankles often badly swollen", "Do pains in the back make it hard for you to keep up with your work". 2) The items of the answer by over 50% of the nurses as the mental symptom at present were "do you fell bad when criticized?", "Do you get angry when everything is against your will?", "do you get angry when ordered to do this and that?", "do you feel uneasy by such a trifle thing?", "do you tremble or are you freightened by sudden sound?". The mental and physical symptoms which have appeared presently in connection with the shift service have been agreed with each other. But the physical condition has been worse than the mental one. 3) In the physical health conditions followed by demosociological character, there were the significant differences by sex, religion and place of residence(p<.05), and in the mental health conditions, there were the significant differences by age, marital status, residence place and the required time for attending hospital(p<.05). 4) There was significant difference by the degree of satisfaction about the duty in both the physical and mental health conditions. In short, the higher the degree of duty satisfaction, the better the health conditions. 5) There were the significant difference according to the times of night duty and whether they take the drug or not or the kinds of the drugs in the physical health conditions related with the characters of night shift. Mental health conditions in the night shift case showed significant differences according to their taking drug or not or the kinds of the drugs(p<.05). I can confirm that the nurses have been affected continuously by the shift service mentally and physically. The maintenance of the physical and mental health of the nurses and its promotion are very important problem to guarantee the quality nursing in the performance of the nursing service continuously and effectively, so the hospital should make every effort to improve the duty conditions by finding out the causes affecting to their health. In the nursing management viewpoint, I think that elevating the satisfaction degree about the duty would be a great help to the promotion of physical and mental health conditions. But what is most important is that the nurses themselves should take care of themselves in maintaining the good conditions in their service in the hospital.

• Journal of Korean Home Economics Education Association
• /
• v.17 no.2
• /
• pp.197-219
• /
• 2005

This study attempted, in accordance with the National Educational Curriculum, to develop achievement assessment standards for a course within the field of home economics which has been widely adopted by Korean vocational high schools, namely, the food and nutrition subject. Focus was also placed on strengthening the management of the curriculum for this food and nutrition course, as well as on establishing proper assessment standards by developing model assessment tools which can be used to assess the subject. The results of this study can be summarized as follows : First, based on an analysis of the related literature and materials. the desired notion of the achievement and assessment standards was established, and their significance ascertained the achievement and assessment standards for the food and nutrition course were set and the type of model assessment tool which should be developed, as well as the method in which it should be applied. was established Second. by analyzing the curriculums and the contents of the textbooks used in the food and nutrition subject, the researcher was able to compile the 70 factors which could to be used to develop the achievement and assessments standards, and then classify these into 6 main categories and 32 sub-categories. Based on the characteristics of these factors and learners' academic performance levels the number of factors was expanded to 89 in order to establish the achievement standards. In turn, these achievement standards were used, in accordance with the learners' achievement and teaming activity levels, to develop three different levels of assessment standards. namely, upper, middle, and lower ones. Third. a model assessment tool was developed which could be used by individual school units as a reference in terms of achievement and assessment standards, and that could be modified to meet each school's circumstances. In order to create the model assessment tool a 100-question questionnaire was formulated that contained various types of questions, such as essay, report, theoretical and practical, portfolio, as well as multiple choice-type questions. Lastly, the researcher introduced measures to effectively use the achievement and assessment standards developed for the food and nutrition course, as well as the model assessment tool in school units.