• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.103-111
• /
• 2004

In this survey paper, we attempt to introduce the subjects of fuzzy logic and neural network technology for flight control systems based on completed and ongoing research programs other developed countries. Also, it is prepared with intention of providing the reader with an overview of related topics and a basic concepts of fuzzy logic and neural network control. The focus is on relatively practical control schemes realistically applicable in the area of flight control system design that could find its usage in the near future in our country. It is hoped that this paper will serve as a useful reference and even concepts provide solutions far current problems and future designs.

• 산업기술연구
• /
• 제21권B호
• /
• pp.117-123
• /
• 2001

In a modern control field, a control engineer who has theoretical backgrounds with some practical knowledge is demanded. That is to say, an engineer who can understand and operate the various parts such as modeling, simulation, system analysis, signal processing, statistics, and hardware is required. In order to prove the theoretical backgrounds and operate various hardwares, a lot of experimental devices for students are designed in universities. Since the conventional experimental devices are manufactured abroad and the prices of the devices are too high, it is difficult to have. If a low cost experimental device can be developed, it will be very useful for a control engineering education. In Ibis paper, an experimental rig which has two control inputs and three sensor outputs to control the end point of a flexible beam is designed and manufactured. This rig can be used for a control field education.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.523-525
• /
• 2004

Over the last few years, the control of bipedal robot has been considered a promising research field in the community of robotics. But the problems we encounter make the control of a bipedal robot a hard task. The complicated link connection of the bipedal robot makes it impossible to achieve its exact model. In addition, the joint velocity is needed to accomplish good control performance. In this paper a control method using ANFIS as an system approximator is purposed. First a model biped robot of a biped robot with switching leg influence is presented. Unlike classical method, ANFIS approximation error estimator is inserted in the system for tuning the ANFIS. In the entire system, only ANFIS is used to approximate the uncertain system. ANFIS tuning rule is given combining the observation error, control error and ANFIS approximation error. But this needs velocity information which is not available. So a practical method is newly presented. Finally, computer simulation results is presented to show this control method has good position tracking performance and robustness without need for leg switching acknowledgement.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.199-205
• /
• 2002

This application study presents a solution to control a Permanent Magnet Synchronous Motor without sensors. The use of this system yields enhanced operations, fewer system components, lower system cost , energy efficient control system design and increased efficiency. The control method presented is field oriented control (FOC). The sinusoidal voltage waveforms are generated by the power module using the space vector modulation technique. A practical solution is described and results are given in this application Study. The performance of a Sensorless architecture allows an intelligent approach to reduce the complete system costs of digital motion control applications using cheaper electrical motors without sensors. This paper deals with an overview of sensorless solutions in digital motor control applications whereby the focus will be the new Controller without sensors and its applications.

• Industrial Engineering and Management Systems
• /
• 제16권1호
• /
• pp.109-117
• /
• 2017

In this article, a control chart based on multiple dependent (or deferred) state sampling for the gamma distributed quality characteristic is proposed using the gamma to normal transformation. The proposed control chart has two pairs of control limits, which can be determined by considering the in-control average run length (ARL). The shift in the scale parameter of a gamma distribution is considered and the out-of-control ARL is evaluated. The performance of the proposed chart has been shown for different levels of the parameters of the proposed control chart. It is also shown that the proposed chart is better than the Shewhart chart in terms of ARLs. A case study with a real data has been included for the practical usage of the proposed scheme.

• International Journal of Control, Automation, and Systems
• /
• 제3권spc2호
• /
• pp.270-277
• /
• 2005

In this paper, a decentralized control problem is considered for multimachine power systems with nonlinear interconnections and disturbances. A direct feedback linearization compensator is employed to cancel most of the nonlinearities, and then a backstepping procedure is applied to deal with the interconnections and to reduce the effects of a disturbance that does not satisfy the matching condition. In this procedure, the disturbance is handled by using a smooth approximation of the signum function. Practical stability is achieved under the assumption that the infinite norm of the disturbance is known. However, even in the case where the infinite norm of the disturbance is not known precisely, the proposed control system still guarantees $L_2$ stability. Furthermore, the origin is globally uniformly asymptotically stable in the absence of the disturbance. A three-machine power system is considered as an application example.

• 대한전기학회논문지
• /
• 제41권4호
• /
• pp.392-399
• /
• 1992

This paper will describe the application of variable structure control theory to the first order dynamic system and verify its robustness. The study on the first order dynamic system control which has been essential part for the control of servo motor (AC,DC) systems has been excluded in the study of variable structure control system(VSCS) because this first order system was not applicable to the previous variable structure control theory. So, for the robustness control of first order dynamic system with variable structure control theory, we propose modified switching function synthesis which guarantees the advantages of conventional VSCS and removes reaching phase which is regarded as shortcomings in VSCS. And we demonstrate the practical potential of implementation about this theory by simulation results of AC motor variable speed control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.150.5-150
• /
• 2001

This paper deals with a modified repetitive control method for compensating automatic gauge control (AGC) to reduce the effect of skid mark which directly influence the quality of products in plate mill process. Since the skid mark on the plate have thermal difference, it makes a different stretching rate and deflection of thickness. Firstly, the (AGC) system and the plate mill process are described by considering function in each control levels. The skid mark of the plate in practical control fields is shown. Also, its frequency variation is given by on-line FFT analysis method. Secondly, a key idea of the modified repetitive control method with time varying period disturbance is represented and compared with standard repetitive control method. Lastly, in simulation ...

• 한국시스템다이내믹스연구
• /
• 제5권1호
• /
• pp.5-33
• /
• 2004

This study explores how agents would make decisions responding to control mechanism in contractual relationship of their firm. Focusing on agent's averse behavior against control, system dynamics model for agent's opportunistic behavior is developed in view of agent theory and control theory. This SD model shows that control mechanism by contracts doesn't always play a positive role on corporate decision-making process and Control, especially in the over-controlled contracts, often makes a paradox accelerating agent's opportunistic behavior unexpectedly. This paradox provides us both theoretical and practical implications for the relationship between control mechanism and autonomous behavior for sustainable corporate management.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.453-458
• /
• 2000

Design of an in-process feedback control system has been studied for precision grinding. A grinding system consists of a grinding tool, a turn table and a disk-shaped workpiece on the table is taken as an object. A grinding process model has been deduced which gives some reasoning about the process errors. In the control system the tool position is actively controlled by an electro-magnetic actuator in-process. The ground error is feedback to compose a closed-loop control system and an optimal PID controller is applied. Some control performances such as transient response and disturbance such as transient response and disturbance attenuation have been examined, which convinces the effectiveness of the control. Some methods for implementation of the control. Some methods for implementation of the control have been suggested from a standpoint of practical application.