• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1536-1544
• /
• 1994

DSP technique was applied to improve the high strength characteristics of hardened cement paste using pozzolan materials as blending materials, and pozzolan reactivity was investigated. Pozzolanic materials such as diatomaceous earth, fly ash and hydrated silica were used as blending material. And also superplasticizer was added to cement for molding the specimens. After curing for 60 days, the specimens substituted with 10 and 15 wt% of diatomaceous earth showed better strength characteristics than the specimen with fly ash. The specimen substituted 7 wt.% of hydrated silica exhibited excellent strength with above 800 kg/$\textrm{cm}^2$.

• Journal of the Korean Ceramic Society
• /
• v.11 no.1
• /
• pp.10-18
• /
• 1974

The hydration at $23^{\circ}C$ between $Ca(OH)_2$ and siliceous materials with various compositions of silica gel and quartz were studied in paste state, and also diatomite was empolyed as another form of silica. The effect of the structural state of silica on the pozzolanic reactivity was investigated by X-ray, DTA, electron microscopy, and chemical analysis. The results obtained were as follows. (1) The molar ratio of $Ca(OH)_2$ to silica gel(C/Sg) being changed in 0.49, 0.81 and 1.22, the free $Ca(OH)_2$ was disappeared within six hours, three days and two weeks respectively and ill-crystallized CSH(I) was formed. However, in the case fo molar ratio of C/Sg=2.45, almost lime was remained uncombinedly after twenty four weeks yet. (2) Though the molar ratio C/Sg of diatomite was 0.71, the hydration was stabilized at three weeks and the result exhibited very peculiar characteristics from silica gel. (3) Pozzolanic reactivity of quartz was negligible, but $\alpha$-cristobalite in diatomite showed appreciable reactivity. (4) The thermal curves showed the exothermic peaks in the range 830 to $930^{\circ}C$ and lower broad peaks at high temperature in the initial steps of hydration, transfered to lower temperature with sharp peaks by proceeding of hydration. (5) The samples containing more silica gel exhibited higher pozzolanic reactivity and martar strength, but the diatomite gave remarkable result for them and they were matched to the strength development rate.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.1077-1080
• /
• 2003

High reactivity metakaolin (HRM) is a manufactured pozzolan produced by thermal processing of purified kaolinitic clay. Field performance and laboratory research of concrete containing HRM have demonstrated its value for bridge decks, bridge deck overlays, high-strength concrete and masonry products. This paper discusses laboratory evaluations to assess the physical properties of antiwashout underwater concrete (AWC) containing HRM, such as pH value, suspended solids, slump flow, and compressive strength. There were not much variations of pH value with the changing HRM contents, but suspended solid test showed that the amount of suspended solids of AWC with 10 and 20% of HRM were reduced in comparison with plain. Due to the fast hydration and reaction property of HRM, slump flow was decreased with increasing HRM contents. According to the results of compressive strength test, AWC with 10 and 20% of HRM showed higher strength characteristic than plain at all curing ages.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.95-101
• /
• 1999

This study was performed to evaluate the characteristics of workability and strength of the concrete containing mineral admixtures such as flyash, blast furnace slag, zeolite powder. As a result, considering their workability and strength, the optimum replacement ratio of them to plain concrete were obtained for each ternary admixture. This increased compressive strength was ascribed to both the closer parkinof fine particles and pozzolan reactivity of powders. This work showed that could be effectively utilized as a blending material without any decrease in the strength of early hydration stage. On the other hand, we found that the compressive strength at early ages ternary ordinary and high strength concrete untill 7 days was small, but that ternary concrete at 28days was highly increased about 31% and 15% extent.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.5
• /
• pp.131-139
• /
• 1994

The min aim of thls study was to evaluate the effect of particle slze of the fly ash as a cement additive. Experimental work was carried out with three different sizes of fly ash. 18.58, 8.95 and 4.02{$mu}m$ in average radius. Namely, the effect of particle size variation of fly ash on the physical properties of cement paste was investigated. The jluidity was decreased with increasing the addition of fly ash to cement paste regardless of the particle size variation. The decrement of the fluidity of the pulverized fly ash was higher than that of the spherical fly ash. On the other hand, the pozzolan reactivity increased with lowering particle size. In the case of specimens with 5% up to 10% addition of fly ash having a particle size of 4.02{$mu}m$. the compressive strength was increased as compared with the plain specimens before curing for 28 days and showed higher value above 800kg /$cm^2$ when cured for 60 days.This increased compressive strength was ascribed to both the closer packlng of fine particles and the pozzolan reactivity of fly ash. These results were comfirmed by measuring both the porosity of the specimens and Ca(OH ), contents remained in specimens. This work showed that could be effectively ut~lized as a blending material without any de crease in the strength of early hydration stage if we can control the particle size of fly ashes by sizing or pulverizing.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.3
• /
• pp.207-213
• /
• 2018

Nowadays, circulating fluidized bed combustor(CFBC) boilers system that can reduce environmental pollution particles are widely used in electric power plants. But the fly ash generated from CFBC boilers has lower $SiO_2$ and higher MgO and $SO_3$ contents and also has free CaO inducing expansion and abrupt initial setting of concrete. Therefore, revised KSL5405 for CFBC fly-ash as well as pulverized coal combustion(PCC) is introduced in the concrete field. In this study, the chemical properties and mechanical properties of blended cements with PCC and CFBC fly-ash produced in Korea are analyzed. The blended cement with only CFBC fly ash shows a lower length change than OPC but a higher flow change ratio. The compressive strength of blended cement paste with PCC and CFBC fly ash is slightly greater than that of cement paste with only PCC fly-ash. Based on the results, CFBC flyash blended cement products should be used with PCC flyash to ensure the material stability and material properties.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.33-41
• /
• 2021

Feldspar, along with Quartz, are the most frequently produced minerals in Korea; however, the potential value is estimated to be significantly low because of the scarce research on the development and application of material properties, except for their limited use in manufacturing minerals, glass, and paints. In this study, we analyzed the eco-friendly material and reactivity improvement characteristics of weathered feldspar through activation technique. The joint structural features observed on the surface of the weathered feldspar show that the joint arrangements are irregularly distributed, and the cavities are interconnected. Due to the irregularly connected cavities on the surface of weathered feldspar, the reaction area of the weathered feldspar is increased; hence the weathered feldspar is considered as a highly reactive pozzolan material when combined with cement. As a result of applying the thermal, mechanical, and chemical activation techniques to improve the functionality of the weathered feldspar, the cation exchange capacity, density, and uniaxial compression strength characteristics were improved. It is considered that weathered feldspar by these porous characteristics can be used as an eco-friendly construction material with excellent physical and chemical properties.

• KIEAE Journal
• /
• v.6 no.2
• /
• pp.11-18
• /
• 2006

In this research, Conducting an engineering properties experiment, this study examined basic properties of regional Hwangto. The results of experiments are as followings. 1) This study confirmed that a result of examining lime order for Hwangto and comparison of stimulants, this study confirmed that 28 day's strength promotion is found in case of calcium hydroxide(Ca(OH)2) and calcium chloride(CaCl2) stimulant. Finally, it is known the fact that lime highly improves the weak strength of Hwangtoh. 2) As XRD analysis for proving the strength manifestation principle of Hwangto by regions, CSH figure and CASH figure appeared in each regional Hwangto in all the strength areas. This result could be appeared through hydraulicity from reaction of alkali stimulant and water, and pozzolan reaction(CSH figure) and $Str{\ddot{a}}tlingite$ reaction(CASH figure) by silica (SiO2) ingredient and calcium hydroxide (Ca(OH)2) among ingredients of clay, and alumina(Al2O3). 3) In result of strength analysis, It is knowned that the Gyeongsangdo Hwangto is stronger than the Jeollado Hwangto in reactivity.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.113-117
• /
• 2009

Fly ash (called FA hereafter) that results from thermal power plants is a long-term strength improving substance with reactivity to pozzolan and has been used for long. However, large amount of FA shows many advantages such as reduction of hydratio energy, long-term improvement in strength and economic feasibility and also has difficulties from reduction in initial strength and durability. In a preceding study, fine particle cement was applied to test the effects on initial strength. Therefore in this study, the effects of fine particle cement on the quality of FA concrete were reviewed. The results can be summarized as follows. Liquidity was increased by the most at FC substitution ratio of 15%. Air capacity was reduced according to increasing substitution ratio of FA and FC. Compressive strength showed high strength expression at all ages when FC was substituted at 45%. Synthesizing the above results, appropriate mixing of FC in FA concrete can improve liquidity, reduce unit quantity and show improvement in strength. In particular, mixed use of FC seems effective in improving early quality of concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.68-71
• /
• 2013

Reactive Powder Concrete (RPC) is an ultra high strength and high ductility cement-based composite material and has shown some promise as a new generation concrete in construction field. It is characterized by a silica fume-cement mixture with very low water-binder (w/b) ratio and very dense microstructure, which is formed using various powders such as cement, silica fume and very fine quartz sand (0.15~0.4mm) instead of ordinary coarse aggregate. However, the unit weight of cement in RPC is as high as 900~1,000 kg/㎥ due to the use of very fine sand instead of coarse aggregate, and a large volume of relatively expensive silica fume as a high reactivity pozzolan is also used, which is not produced in Korea and thus must be imported. Since the density of RPC has a heavy weight at 2.5~3.0 g/㎤. In this study, the modified RPC was made by the combination of ternary pozzolanic materials such as blast furnace slag and fly ash, silica fume in order to economically and practically feasible for Korea's situation. The fire resistance and structural behavior of the modified RPC exposed to high temperature were investigated.