• Title/Summary/Keyword: Power-save

검색결과 515건 처리시간 0.034초

IEEE 802.11 무선랜의 Power Save Multi-Poll 동작의 수학적 성능 분석 (Numerical Analysis of Power Save Multi-poll Operation in IEEE 802.11 WLANs)

  • 진성근
    • 한국산업정보학회논문지
    • /
    • 제22권3호
    • /
    • pp.13-18
    • /
    • 2017
  • 본 논문에서 802.11 무선랜의 Power Save Multi-Poll (PSMP) 동작에 대한 성능을 수학적으로 분석한다. 수학적 분석을 통하여 우리는 전체 동작 시간 중 전력 소비에 사용되는 시간을 구함으로써 전력 소비 효율을 얻는다. 수학적 분석을 통하여 PSMP 동작의 효율성을 예측할 수 있다.

IEEE 802.11 기반 이동 애드혹 망의 전력 절감 모드에서 플러딩 지연의 개선 (Reducing Flooding Latency in Power Save Mode of IEEE 802.11-based Mobile Ad hoc Networks)

  • 윤현주;서명환;마중수
    • 한국정보과학회논문지:정보통신
    • /
    • 제31권5호
    • /
    • pp.532-543
    • /
    • 2004
  • 이동 애드혹 망을 구성하는 노드들은 일반적으로 배터리 전력을 사용하기 때문에 이들의 에너지 소모량을 줄이는 연구들이 각 계층에 대해 이루어져 왔다. 매체 접근 제어 프로토콜로 많이 이용되는 IEEE 802.11 DCF에서도 전력 절감 모드가 정의되어 있으며, 노드들은 동기화된 상태에서 주기적으로 활동 상태와 휴면 상태를 반복한다. 활동 상태 동안 서로 전송할 메시지가 있는지 여부를 이웃 노드에 공지하고, 전송에 관여하게 될 노드들은 계속해서 활동 상태로 머물러 필요한 송수신을 하는 반면, 그 외의 노드들은 다음 주기까지 휴면 상태에 들게 된다. 대부분의 기존 연구들은 보다 많은 전력 절감을 위해 휴면기간을 최대화, 최적화하는 것에 초점을 맞추었다. 그러나, 이로 인해 메시지들이 한 주기 당 한 홉씩 전달되어 결과적으로 매우 긴 전송지연을 초래할 수 있다는 것은 지금까지 간과되었다. 본 논문에서는 IEEE 802.11 DCF의 전력 절감 모드에서 빠른 속도로 전체 망으로의 플러딩을 수행할 수 있는 개선된 프로토콜을 제안하였다. 고정된 길이의 활동 상태 기간 동안 이웃 노드뿐 아니라 최대한 멀리까지 공지를 전달하게 하고, 동시에 많은 구간의 노드가 깨어 있게 함으로써 그 이후의 데이타 메시지 전달 속도를 높인다 시뮬레이션에 의한 실험 결과, 제안된 알고리즘은 IEEE 802.11 DCF 전력 절감 모드와 비교해 약간의 추가 에너지 소모로 플러딩 전송 지연을 최대 80% 이상 감소시켰으며, 플러딩 트래픽이 있을 경우의 유니 캐스팅 전송 지연 또한 약 50% 만큼 감소시키는 성능을 보였다.

802.11 practical improvements using low power technology

  • Bhargava, Vishal;Raghava, N.S.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제16권5호
    • /
    • pp.1735-1754
    • /
    • 2022
  • The reliability and performance of WiFi need optimization because of the rising number of WiFi users day by day. A highlighted point is saving power while transmitting and receiving packets using WiFi devices. Wake-on-Wlan (WoW) is also implemented to improve energy consumption, but it also needs betterment. This paper will introduce universal ideas to transmit and receive packets using low-power technology like Bluetooth or BLE (Bluetooth low energy). While looking for power-saving ways in this research, WiFi connection and maintenance also take care using lesser power-consuming technology. Identifying different use-cases where low power technology can help save energy and maintain 802.11 connection is part of the research. In addition, the proposed method discuss energy saving with unicast and broadcast/multicast data. Calculation of power-saving and comparison with standalone WiFi usage clearly shows the effectiveness of the proposed method.

이중모우드 가변 변환이득 믹서의 전력 효율 특성 (DC Power Dissipation Characteristics for Dual-mode Variable Conversion Gain Mixer)

  • 박현우;구경헌
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.113-114
    • /
    • 2006
  • In this paper, dual-gate mixer has been designed and optimized to have variable conversion gain for WiBro and WLAN applications and to save power. With the LO power of 0dBm and RF power of -50dBm, the mixer shows 15dB conversion gain. When RF power increases from -50dBm to -20dBm, the conversion gain decreases to -2dB with bias change. The variable conversion gain can reduce the high dynamic range requirement of AGC burden at IF stage. Also, it can save the dc power dissipation of mixer up to 90%.

  • PDF

IMV를 사용한 유압굴삭기 붐 동작의 에너지 절감 (Energy Saving in Boom Motion of Excavators using IMV)

  • 허준영
    • 드라이브 ㆍ 컨트롤
    • /
    • 제14권3호
    • /
    • pp.1-7
    • /
    • 2017
  • Energy consumption of conventional hydraulic excavators controlled by MCV is considerable when negative load is applied because the meter orifice and meter-out orifice are machined in one spool. Therefore, IMV is introduced to save energy use of hydraulic excavators, but existing hydraulic excavators have various advantages so it is difficult to make a clear comparison. In this study, we compare the use of an existing MCV excavator that has many advantages such as negative control, and IMV for boom up and down operation, and if IMV is used to save energy, we will examine the cause. If possible, for comparability under the same conditions, both systems use pressure balance valves to minimize power consumption when not using power in the actuator. The orifice area at each notch of each valve is calculated, and energy saving is verified by comparing the two systems through simulation.

Electric Power 01_해외전력

  • 대한전기협회
    • 전기저널
    • /
    • 통권358호
    • /
    • pp.16-17
    • /
    • 2006
  • 오스트레일리아 남동부의 빅토리아 주는 지난 6월 5일 가정용 민생부문 전력수요를 대상으로 한, 에너지 소비량 및 온실가스 배출량의 삭감을 목표로 하는 대규모의 에너지절약 캠페인‘You have the Power, Save Energy’를 전개한다고 발표하였다.

  • PDF

Small-IoT 환경에서 이기종 네트워크를 활용한 스마트 모바일 단말의 에너지 효율적 실시간 컴퓨팅 기법 (Energy-efficient Real-time Computing by Utilizing Heterogenous Wireless Interfaces of the Smart Mobile Device in Small-IoT Environments)

  • 임성화
    • 반도체디스플레이기술학회지
    • /
    • 제20권3호
    • /
    • pp.108-112
    • /
    • 2021
  • For smart mobile devices, the wireless communication module is one of the hardware modules that consume the most energy. If we can build a multi-channel multi-interface environment using heterogeneous communication modules and operate them dynamically, data transmission performance can be highly improved by increasing the parallelism. Also, because these heterogeneous modules have different data rates, transmission ranges, and power consumption, we can save energy by exploiting a power efficient and low speed wireless interface module to transmit/receive sporadic small data. In this paper, we propose a power efficient data transmission method using heterogeneous communication networks. We also compared the performance of our proposed scheme to a conventional scheme, and proved that our proposed scheme can save energy while guaranteeing reasonable data delivery time.

IEEE 802.15.4 기반 CSMA/CA 충돌에 대한 실험결과에 근거한 Energy Save에 대한 연구 (Study of Energy Save upon Result of CSMA/CA Collision on IEEE 802.15.4)

  • 신진철;박홍성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.445-447
    • /
    • 2007
  • This paper is seeing as one big cause that reduce Life Time of sensor node become soft if BackOff Time is prolonged in CDMA/CA of competition way that consist at data transmission of each sensor nodes base sensor network environment. So solution method uses GTS, wish to reduce competition Node's, and minimise data transmission delay.

  • PDF