• 동력기계공학회지
• /
• 제10권3호
• /
• pp.81-87
• /
• 2006

This paper deals with an empirical model for decoupling control to control the refrigeration system effectively. The conventional control schemes of the system are mainly focused on representative two control methods, superheat control and capacity control. The capacity control is basically conducted to respond partial loading conditions on the purpose of energy saving. The superheat control is mainly carried out to maintain maximum coefficient of performance (COP). In the variable speed refrigeration system, the capacity and the superheat are controlled by inverters and electronic expansion valves respectively for saving energy and improving cost performance. The capacity and superheat can not be controlled independently because of interfering loop when the compressor speed and opening angle electronic expansion valve is varied. Therefore, we suggest decoupling model to eliminate the interfering loop at first. Next, each transfer function in decoupling control model is obtained from number of experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.851-854
• /
• 2004

This paper studies Optical Fiber(OF) - LED illuminated display board system for energy saving. The OF-LED illuminated display board system has PV modules, batteries, and charge & discharge system, and dynamic full color display controller. Both maximum power point tracker (MPPT) and constant current & constant current controls (CCVC) are used In govern the charging system. It can be improve the charging efficiency of battery. The objective of this thesis paper is to build advertisement lighting system with OF-LED in to charge a 12-volts lead acid battery by using a field wired PV array. We saved the maintenance cost and developed of advertisement effectiveness. To verify the proposed OF-LED illuminated display board system for energy saving, the detail simulation and experiment results indicate that operating characteristics are verified by experiment with a laboratory prototype in this paper.

• 한국통신학회논문지
• /
• 제37C권12호
• /
• pp.1222-1229
• /
• 2012

가정 및 빌딩에서의 에너지 소비 절감 및 효율 향상을 위한 에너지 절감 시스템(ESS)의 새로운 구조와 기능 요구사항을 정의하는 신규 국제표준 제안서를 2009년에 IEC TC 100에 제안하고 최종 IEC PT 62654라는 신규 프로젝트로 채택이 되었다. 최근 표준 발간을 위한 최종 투표에서 만장일치로 통과함에 따라 2012년 8월 IEC TS 62654 규격이 발간되었다. 표준의 검증을 위해 ESS 서버, ESS 클라이언트, 휴대용 ESS 터미널로 구성되는 ESS 시스템의 프로토타입을 표준화 과정과 병행하여 구현하였으며, 또한 ESS 서버와 클라이언트간 통신을 위한 EPCM 프로토콜을 구현하였다. EPCM 프로토콜은 ESS 네트워크의 자동 구성, 전력 소비 모니터링, 원격 전원 제어 및 지능적인 에너지 절감 서비스를 위한 부가 기능들을 지원한다.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2414-2419
• /
• 2012

본 논문에서는 물 재이용 펌프 시스템의 에너지 효율적 운전 방법을 제안한다. 1시간 단위의 시간대에서 최적운전제어를 위해 예측구간 스위칭방법과 선형계획법을 적용하고 에너지 비용은 경부하, 중부하, 그리고 최대부하를 포함한 TOU 요금과 피크요금을 통해 산정하도록 한다. 물 재이용 펌프시스템에서의 최적운전은 TOU 요금과 피크요금을 포함한 에너지 비용을 최대로 줄일 수 있도록 수행한다. 시뮬레이션을 통해 제안한 최적운전방법을 적용하면 많은 전력 에너지 비용의 절감과 전력계통의 안정성 향상을 확인할 수 있다.

• 전자통신동향분석
• /
• 제38권2호
• /
• pp.26-35
• /
• 2023

Energy efficiency is an important factor toward sustainable future mobile network systems. As the size of the 5G mobile network system increases, the consumption and costs of energy increase. Accordingly, energy-saving optimization has become a major process in network systems, and various related technologies for energy saving are being developed. We provide a brief review of the technical trends in energy saving in 3GPP 5G & 5G Advanced systems and O-RAN systems. We focus on power models and energy-saving technologies in various resource domains of 3GPP 5G & 5G Advanced systems and energy-saving use cases of O-RAN systems.

• 전자공학회논문지
• /
• 제52권10호
• /
• pp.161-167
• /
• 2015

본 논문에서는 첨단 주택에서 가전기기 에너지 절약을 위한 재실 기반 에너지 절약 시스템을 제안하였다. 제안된 시스템은 센싱 시스템과 홈 게이트웨이 시스템으로 구성된다. 센싱 시스템은 사람의 움직임을 감지하는 PIR 센서를 장착한 무선 센싱 노드와 CT센서를 이용하여 전류 사용량을 측정하고 무선으로 전달하는 스마트 플러그로 구성된다. 스마트 플러그를 이용하여 가전기기의 전류 소모량을 측정하고, 방과 문에 설치한 재실 감지 센서를 이용하여 거주자의 재실 유무를 확인하였다. 제안한 시스템은 부재 공간의 불필요한 전기 에너지 사용량을 스위치를 끔으로서 절약한다. 실험 결과 재실 기반으로 전기 에너지를 절약한다면 약 34%를 절약할 수 있음을 확인하였다.

• 동력기계공학회지
• /
• 제16권2호
• /
• pp.60-65
• /
• 2012

Pneumatic actuators are clean, lightweight, and can be easily serviced, whereas low energy efficiency has been considered as a critical shortcoming compared with corresponding hydraulic and electrical actuators. This study describes a new design method of pneumatic cylinder driving apparatus by lowering a supply pressure. The simulation study demonstrates that the designed system with the proposed method can operate at the smaller energy consumption state compare to the designed system with the conventional method for the specified working conditions.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.107-111
• /
• 2011

This carbon nano heating system was consisted of power supply equipment, a carbon fiber and a stainless flexible hose. carbon nano heating system was manufactured by carbon fiber of a power capacity 30kw/h and light-oil hot air heater in control plot was the heating capacity 30,000kcal/h, As the result, Temperature difference due to carbon nano heating system and hot air heater in greenhouse showed that air temperature at experimental greenhouse, comparison greenhouse were $14.8^{\circ}C$, $13.4^{\circ}C$ respectively. It was found that carbon nano heating system and light-oil hot air heater heating cost were 1,095,740won, 2,683,628won. therefore as heating cost saving 60%. Yield of tomatoes cultured in greenhouse using carbon nano heating pipe was 4% inclease. Economic analysis comparison between the carbon nano heating pipe and the hot air heater in greenhouse were 41% respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.66-68
• /
• 2006

DVB-H (Digital Video Broadcasting for Handhold) is a new standard, currently being developed, which defines mobile enhancements for the DVB-T (DVB-Terrestrial) standard. For the reception of service via mobile handhold devices, seamless mobility and power saving are essential requirements of DVB-H. For seamless handover, the receiver should monitor neighboring cells and it increases the power consumption. And so, power efficient handover scheme to support both mobility and power saving is required. In this paper, we propose cell searching scheme to reduce power consumption by reducing the number of frequency scanning during the handover. Through the numerical evaluation, we analyzethe performance of handover schemes.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.329-337
• /
• 2016

With the increasing deployment of distributed generators in the distribution system, a very large search space is required when dynamic programming (DP) is applied for the optimized dispatch schedules of voltage and reactive power controllers such as on-load tap changers, distributed generators, and shunt capacitors. This study proposes a new optimal voltage and reactive power scheduling method based on dynamic programming with a heuristic searching space reduction approach to reduce the computational burden. This algorithm is designed to determine optimum dispatch schedules based on power system day-ahead scheduling, with new control objectives that consider the reduction of active power losses and maintain the receiving power factor. In this work, to reduce the computational burden, an advanced voltage sensitivity index (AVSI) is adopted to reduce the number of load-flow calculations by estimating bus voltages. Moreover, the accumulated switching operation number up to the current stage is applied prior to the load-flow calculation module. The computational burden can be greatly reduced by using dynamic programming. Case studies were conducted using the IEEE 30-bus test systems and the simulation results indicate that the proposed method is more effective in terms of saving electric charges and improving the voltage profile than loss minimization.