• 대중서사연구
• /
• 제26권3호
• /
• pp.45-86
• /
• 2020

이 글의 목적은 70년대 국가권력에 의해 소환되었던 전통 이념이 '전통의 현대화'라는 명목 아래 당대 한국연극 현장에 수용되었던 양상과 그 함의를 밝히려는데 있다. 이는 다른 한편 70년대 전통 논의를 둘러싼 한국연극계의 자기검열의 양상을 비판적으로 검토하는 작업이기도 하다. 이를 위해 이 글에서는 민족극을 창안하는 방식으로 70년대 한국연극계의 전통 논의를 선점했던 극단 민예극장의 활동을 살펴보았다. 이제까지 70년대 극단 민예극장에 대한 평가는 전통의 계승과 변용을 내세운 허규의 연출 작업을 바탕으로 공연예술적 성취 여부에 집중되었다. 하지만 70년대 국가가 주도한 문화정치의 장(場)에서 구성된 전통 이념과 그것이 작동된 양상은 예술적 성취라는 측면에서만 평가할 수 없다. 무릇 전통을 전유하려 한 주체의 선택적 기준에 따라 전통 이념은 선별되고, 선별된 전통 이념의 선택 과정에서 특정 대상들이 배제, 폐기, 재선별, 재해석, 재인식된다. 70년대 비문화로 호명되었던 서구적인 것이나 퇴폐불온한 것과의 차이 속에서, 전통이 전유되었던 70년대의 상황도 이로부터 멀리 있지 않다. 국가가 주도한 70년대의 전통 논의는 전통의 특정 이념을 안정된 가치로 합법화했는데, 그것을 작동시킨 한 방식은 국가의 문예지원이었다. 70년대 극단 민예극장은 당시 연극 위기론의 구체적 대안으로 선택되었던 전통의 현대화를 바탕으로 민족극을 지향했다. 그것은 구체적으로 전통연희의 계승과 변용이라는 방식으로 구현되었는바, 특히 극단 민예 극장의 대표 연출가 허규에게 전통은 거부할 수 없는 안정적 가치였고 그것의 계승과 변용은 의심할 바 없는 소명으로 내면화되었다. 그 결과 허규가 연출한 극단 민예극장의 공연은 일정한 성취에도 불구하고 과도한 전통연희의 관습들로 채워진 숙련된 장인술로 귀착되었다. 70년대의 전통 이념은 80년대 들어 새로운 전유의 양상으로 전개된다. 1986년 극단 민예극장의 핵심 단원이었던 손진책, 김성녀, 윤문식 등은 민예극장을 탈퇴하여 극단 미추를 만든다. 극단 미추는 연출가 손진책을 중심으로 풍자와 해학이 넘치는 마당놀이를 선보이며 전통의 대중화를 끌어냈다. 전통연희에 내재된 민중의 저항정신을 전통적 가치로 전유했던 대학가의 마당극처럼, 손진책의 마당놀이는 풍자와 해학을 통해 위압적인 국가권력을 비판하고 조롱함으로써 대중적 인기를 끌었다. 70년대 전통 논의의 자장 안에서, 민중의 저항정신을 전통적 가치로 전유하며 자생한 마당극이나 전통의 대중화를 성취한 극단 미추의 마당 놀이는 예술적 성취로써만 평가되지 않는다. 마찬가지로 전통의 계승과 변용이라는 측면에서 70년대 극단 민예극장이 성취한 것 역시 70년대 전통이 소환되었던 맥락을 제외하고 독립적으로 평가될 수 없다. 70년대 국가 주도의 전통 논의에 대응한 한국연극 평단의 시각이 예술성을 바탕으로 한 공연예술의 질적 성취에만 집중된 대목이 아쉬운 것은 그 때문이다. 이 글에서는 이런 맥락을 비판적으로 검토하고, 이를 바탕으로 70년대 극단 민예극장의 활동을 중심으로 당대 한국연극계의 전통 논의와 그 실천 양상을 살펴보았다. 결과적으로 70년대 극단 민예극장의 활동이 한 계기로 작용했을 대중적 마당놀이나 민중저항의 마당극은 70년대 극단 민예극장이 전통을 전유하는 방식, 곧 전통의 계승과 현대적 변용과의 '차이' 속에 정립되었다. 계기는 되었으나 그에 따른 유의미한 차이를 지속적으로 생산해내지 못한 점, 이것이 극단 민예극장의 '전통'이 70년대 한국연극사에서 차지하는 의미이자 한계이다.

• 대한간호학회지
• /
• 제13권1호
• /
• pp.7-21
• /
• 1983

For the flexible and rational distribution of limited existing health resources based on measurements of individual risk, the socalled Risk Approach is being proposed by the World Health Organization as a managerial tool in maternal and child health care program. This approach, in principle, puts us under the necessity of developing a technique by which we will be able to measure the degree of risk or to discriminate the future outcomes of pregnancy on the basis of prior information obtainable at prenatal care delivery settings. Numerous recent studies have focussed on the identification of relevant risk factors as the Prior infer mation and on defining the adverse outcomes of pregnancy to be dicriminated, and also have tried on how to develope scoring system of risk factors for the quantitative assessment of the factors as the determinant of pregnancy outcomes. Once the scoring system is established the technique of classifying the patients into with normal and with adverse outcomes will be easily de veloped. The scoring system should be developed to meet the following four basic requirements. 1) Easy to construct 2) Easy to use 3) To be theoretically sound 4) To be valid In searching for a feasible methodology which will meet these requirements, the author has attempted to apply the“Likelihood Method”, one of the well known principles in statistical analysis, to develop such scoring system according to the process as follows. Step 1. Classify the patients into four groups: Group $A_1$: With adverse outcomes on fetal (neonatal) side only. Group $A_2$: With adverse outcomes on maternal side only. Group $A_3$: With adverse outcome on both maternal and fetal (neonatal) sides. Group B: With normal outcomes. Step 2. Construct the marginal tabulation on the distribution of risk factors for each group. Step 3. For the calculation of risk score, take logarithmic transformation of relative proport-ions of the distribution and round them off to integers. Step 4. Test the validity of the score chart. h total of 2, 282 maternity records registered during the period of January 1, 1982-December 31, 1982 at Ewha Womans University Hospital were used for this study and the“Questionnaire for Maternity Record for Prenatal and Intrapartum High Risk Screening”developed by the Korean Institute for Population and Health was used to rearrange the information on the records into an easy analytic form. The findings of the study are summarized as follows. 1) The risk score chart constructed on the basis of“Likelihood Method”ispresented in Table 4 in the main text. 2) From the analysis of the risk score chart it was observed that a total of 24 risk factors could be identified as having significant predicting power for the discrimination of pregnancy outcomes into four groups as defined above. They are: (1) age (2) marital status (3) age at first pregnancy (4) medical insurance (5) number of pregnancies (6) history of Cesarean sections (7). number of living child (8) history of premature infants (9) history of over weighted new born (10) history of congenital anomalies (11) history of multiple pregnancies (12) history of abnormal presentation (13) history of obstetric abnormalities (14) past illness (15) hemoglobin level (16) blood pressure (17) heart status (18) general appearance (19) edema status (20) result of abdominal examination (21) cervix status (22) pelvis status (23) chief complaints (24) Reasons for examination 3) The validity of the score chart turned out to be as follows: a) Sensitivity: Group $A_1$: 0.75 Group $A_2$: 0.78 Group $A_3$: 0.92 All combined : 0.85 b) Specificity : 0.68 4) The diagnosabilities of the“score chart”for a set of hypothetical prevalence of adverse outcomes were calculated as follows (the sensitivity“for all combined”was used). Hypothetidal Prevalence : 5％ 10％ 20％ 30％ 40％ 50％ 60％ Diagnosability : 12% 23% 40% 53% 64% 75% 80%.

• 철학연구
• /
• 제131권
• /
• pp.223-244
• /
• 2014

이 논문에서 필자는 "주역"을 점서가 아니라 철학적 수양서로서 해석한다. 본래 "주역"은 점을 치기 위해 만들어진 점서였지만, 그 외에 인문학의 담론을 생산하는 풍부한 원천이었다. 왜냐하면 독특한 언어적 상징체계를 가지고 있기 때문이다. "주역"의 괘효(卦爻) 체계는 수많은 상징적 기능을 가졌는데 그것은 철학적으로나 문화적으로 새롭게 해석될 수 있는 여지가 너무나 많다. 그래서 "주역"은 어떤 내용이나 사건에도 대입이 가능하고 그럼으로써 우리가 직면하고 있는 인생의 문제들을 해결하는 데 많은 도움을 줄 수 있다. 더욱이 "주역"의 독특한 특성은 그것을 읽고 해석하는 사람의 적극적 개입에서 매우 잘 드러난다. 바로 칼 구스타프 융이 이러한 적극적 개입을 통해 "주역"을 해석해야 한다고 주장한 사람이다. 그는 리하르트 빌헬름이 번역한 "주역"의 서문에서 '동시성(同時性)'을 적용한 "주역"해석의 가능성을 언급하고 있다. 그에 따르면, "주역"은 미래를 예측하거나 정해진 운명을 말해주는 것이 아니라 자기 자신을 돌아보게 하거나 스스로 문제의 해답을 찾아내는 자료(自療)이다. 그것은 단순히 점친 결과물이 아니라 점치는 행위를 통해서 질문자 스스로 괘효 사(卦爻 辭)에 대한 해석을 하도록 한다. 그는 주어진 괘효 사(卦爻 辭)에서 자신의 문제의 해답을 스스로 찾아내는 일에 '동시성(同時性)'을 적용하고 있다. 동시성(同時性)이란, "의미 있는 우연의 일치 현상을 설명하는 무인과적(無因果的) 연관의 원리"이다. 즉, 동시성(同時性)이란 인과율에서 뜻하는 우연성과는 달리 '의미 있는 우연의 일치'를 뜻한다. 그는 동시성(同時性)을 통해서, 괘상(卦象)에서 도출된 점괘는 점치는 인간 혹은 점의 결과를 받는 인간이 가진 일정한 상황 하에서 무의식의 심리 상태가 밖에 투영된 것이라는 이론을 제시한다. 이러한 융의 해석은 상징적 언어를 사용하는 "주역"의 의미전달 방식이 직접적이지 않고 간접적이기 때문이다. "주역"의 상징적 언어체계의 목적은 객관적 지식의 전달이 아니라 독자 자신의 자기 변화에 있다. 바로 이런 점이 임상철학적으로 적용될 수 있다. 일상에서 삶의 고민과 고통들에 처한 사람들은 "주역"에서 어떤 괘효사(卦爻 辭)를 고르든 그것에서 자신에게 의미 있고 유익한 조언을 찾을 수 있다. 그것은 본래 자신의 내면 속에 잠재되어 있던 것인데, "주역"의 괘효상(卦爻 象)이나 괘효사(卦爻 辭)를 통해 구체적으로 드러난 것일 뿐이기 때문이다. 바로 이런 의미에서 우리는 "주역"으로부터 괘효(卦爻)의 상(象)이나 사(辭)가 담고 있는 의미를 자신의 상황 속에서 연결시켜 자신에게 필요한 조언 혹은 충고를 스스로 읽어 내어 자기화하면서 자신을 변화시키고 치유하는 하는 힘을 가질 수 있게 된다. 그리고 바로 이점을 "주역"이 가지고 있는 중요한 역할 중의 하나라고 평가할 수 있겠다.

• 한국연극학
• /
• 제53호
• /
• pp.31-56
• /
• 2014

If we define theatre as an infinite tower piled up by smoke, the strata of the organic composition of an actor's/actress' body-mind-spirit, may not only be complicatedly worked out, but it seems to belong to a non-scientific realm. However and at the same time, it is also true that the audience is eager to witness a certain kind of specific vitality from the actor/actress on stage. Of course the vitality is hard to be prescribed. Simply we call it a texture of energy, nuance of existence, or much simpler, an actor's/actress' 'aura'. That is, the existential nuance of the actor/actress. The nuance, which is surging from the actor's/actress' authentic presence, ultimately comes out of, not the circumstantial interpretation of the production but the power of its integration. We can find from the works of Meyerhold, Grotowsky and Barba the theatrical fact that the actor's aura can be obtained by a kind of artificiality rather than innate characteristics of existence. These directors commonly regard theatre as the actor's/actress' theatre. Respectively choosing his own specific methods of expression, they unexpectedly meet in a same spot in which actor's/actress' theatre can be realized by the rediscovery of the actor's/actress's body-form. In other words, their approaching methods to theatre look alike, at least in that abandoning reserving any natural, unconscious, economic body-form of an actor/actress, they rather try to discover a certain kind of 'technical' body-form. The form which is totally non/un-conscious, unfamiliar and non-economical. Their research process explores an ideal body-form, and this thesis focuses on this point. For this work, I bring the notion of 'liminality' that connotes the praxis for essential presence of the actor/actress as well as the incubating time and space nacessary for his/her rebirth. And for developing this work, I ask: Could not the actor's/actress' consciousness and the spatiotemporal dimensions (s)he meets, be possibly defined as the core of liminality, only in case that (s)he requires them in the process of, either exploring the unfamiliar body or familiarising with the unfamiliar body-form? As I mentioned above, the three frontiers' theatrical journey is similar in part. For example, three all start from the actor's/actress' consciousness and then go through the body enlarged with it. Then they continue their journey, but different from one another. Meyerhold still uses the conscious body. But now he transforms it into a kind of mobilized sculptures. In comparison with Meyerhold's use of the consciousness, Grotowsky puts his emphasis on an autonomous body which, if necessary, cast away even the innate consciousness. Likewise, to Barba, theatre always starts from the actor/actress who has already taken off all kinds of conventions. (Conventions should be re-designed!) The actor/actress therefore recreates him/herself as his/her body-mind wears a new, unfamiliar, readjusted form and vitality. And then this restructured body-mind may unceasingly aim at exploring its vitalized 'positive organism', that is the waves of self-centering energy, an existential nuance, and an authentic (or maybe behavioral) expressiveness. Now it seems clear that the liminal process for the frontiers' theatrical journey could be equalized as a profound process of self-penetration, self-transformation, and self-realization. This thesis explores the mystic realm of liminality.

• 한국철학논집
• /
• 제56호
• /
• pp.81-117
• /
• 2018

이 연구는 우리나라의 근대 신종교의 핵심 사상인 개벽사상에 대한 상호 비교를 통해 개벽사상의 총체적 특징들과 그 의미들을 밝히는 것을 목적으로 한다. 지금까지의 대부분의 연구의 한계점은 신종교 각각의 개벽사상에 대한 단편적 연구에만 머물러 있다는데 있다. 이를 극복하기 위해 먼저 주역의 우주론적 시간관을 포괄하는 철학적 관점에서 개벽사상을 구명해보았다. 그리고 이러한 방법론적 기초 위에서 기존의 연구 성과를 정리하여 동학과 정역, 원불교, 그리고 강증산 각각의 개벽사상의 전개 과정과 성격을 살펴보았다. 그리고 각 개벽사상을 비교 분석하여 서로간의 공통점과 차이점을 정리해보았다. 신종교 창교자들은 자신들이 살았던 시점을 기준으로 선천과 후천의 획기적 전환 즉 천지와 자연의 운도(運度)의 커다란 변화가 이루어진다고 보았다. 운도론의 개념은 원시반본(元始返本)하는 우주자연의 운도에 따른 변화 양상을 설명하는 것과 같은 개념인데, 후천개벽사상 속에는 이러한 내용과 개념들이 고스란히 들어와 있다. 이 논문에서는 이 같은 선천후천 전환의 운도론적 관념이 수운(水雲), 일부(一夫), 소태산(少太山), 증산(甑山)의 교설 속에 상당히 많이 나타나있음을 밝혔다. 신종교 개벽사상에서의 선천은 인간의 한계상황을 대변하는 위기의 세계이며, 후천은 그 한계상황을 절대자의 힘 또는 극적인 우주변화로 인해 실현된 종교적 이상세계를 뜻한다. 그렇기에 개벽사상은 내일의 이상세계의 도래를 바라는 일종의 우주론적 말세론이며 종교적 역사관이다. 또한 우주론적 말세론은 일종의 시간관이며 역사관이기 때문에 필연적으로 그것에 포함되어 있는 선천과 후천이 각각 얼마나 기나긴 시간을 가졌는가 하는 문제를 지니게 된다. 그리고 특히 선천과 후천에서 사회의 조건들과 인간의 삶이 어떻게 달라지는가 하는 내용을 전제하게 된다. 따라서 이 논문에서는 우주론적 차원의 시간관에 대한 이해를 바탕으로 이러한 문제들에 대한 각각의 신종교에서 밝히고 있는 답변 내용들을 나열하고 비교 분석해보았다. 수운은 초월적 존재라 할 수 있는 하늘님과의 접신을 통해 구원의 메시지를 전달하는 사명을 맡았고, 일부는 역학적 원리를 통해 선천을 넘어서는 후천 세계의 도래를 밝혔으며, 소태산은 그 후천의 시대를 맞이하고 살아가기 위한 정신개벽론을 제기한 것으로 볼 수 있으며, 증산은 그와 같은 후천을 만들고 가져다주는 절대자임을 선언하였던 것이다.

• 대순사상논총
• /
• 제25_1집
• /
• pp.121-155
• /
• 2015

The purpose of this article is to study on the comparative relationship between mutual cooperation of the Dae-soon thought of Dae-soon jinrihoe and Shinnyo thought of Shinjo Ito. Dae-soon thought focuses on outspreading virtues and enlightenment teaching based on the saying of Jeong-san Sang Jae's Mutual cooperation without any grudge. According to the Buddha's nature thought of Shinjo Ito, 'Dharma kāya resident' is the source of touching upon buddhahood. The Shinyo-en is an outward manifestation of their deep resolve to help others by cultivating spiritual faculty and mind session. First, we can find the virtue action theory in the mutual cooperation of Dae-soon thought and the virtue nature theory in the Shinnyo thought of Shinjo Ito. From the perspective of comparative relationship, it was Jeong-san Sang Jae who laid foundation for the Posterior Grand Renewal. His idea is that the universe should be completed through the mutual communication between the earth and men following the Posterior Grand Renewal. It was Kyodoin-sama who laid the foundation for identifying the place Shinchoji was established. It was at the time that the power we call bakku-daiju as transversality and Shinnyo spiritual faculty were perfected through Shindoin-sama's passing. Second, based on Jeon-kyungn or Dae-soon Ji Chim, outspreading virtue is to awaken mutual cooperation without any grudge and the enlightenment teaching to practice according to mutual cooperation principle without any deceit toward one's own self. No deceit toward one's own self is to be sincere, to be respectful and to be faithful in Jeong-san Sang Jae. In the different context of Mahayana Buddhism, we can be aware that the immortal resident immortal of Dharma kāya is the source of permanent bliss in the Mahāyāna Mahāparinirvāṇa Sūtra' From the perspective of comparative relationship to pray toward Jeong-san Sang Jae and to participate in the Posterior Grand Renewal is to take part in Cheonji-Gongsa. It is a similar phenomena to be reflected suchness reality before the three personifications of buddhahood and the Shinnyo Stupa is the same meaning as meeting the ever present Buddha. Both of them, they focus to find religious altruism from real possibilities of mutual support. They argue that to dispense with altruism is to dispense with Sang Jae or Dharma for the divine transformation of human possibilities Third, Everybody possesses unique and wonderful abilities to be unified with Jeong-san Sang Jae. If we seek happiness by trying to get by without making much of an effort to take part in CheonjiGongsa, it will be difficult to attain the harmony and peace of mankind with outspreading virtues and enlightenment teaching. In the 'Mahāyāna Mahāparinirvāṇa Sūtra' tells us 'all sentient beings have Buddha nature' that could be the possibility to the fulfillment of buddhahood in the spiritual practice. From the comparative relationship, we can strive with open hearts and minds, in efforts that benefit others, and in ways we can work together to build a word of joy in which everyone can have an opportunity to cultivate spiritual faculty. This is based on mutually beneficial voluntary focused our principles into practice the spirit to build a mind session of Shinnyo as the civic clean precepts of 'Mahāyāna Mahāparinirvāṇa Sūtra'. Fourth, the disciples of Jeong-san Sang Jae are encouraged to acquire the Mutual cooperation manner of being considerate. It is important to accumulate virtue action by daily effort. It is the contrast to awaken virtue nature by daily practice. The Buddha's nature thought of Shinjo Ito is based on the thought of Mahāyāna Mahāparinirvāṇa Sūtra. It can be supported by the Shinnyo parents and the two Dojis to build a world of joy as the light dharma descending and the emphasis of Tathatā spiritual faculty. It's not that we can't do something we haven't attained a higher spiritual level. What counts is our continuos effort, act so we can cultivate our spiritual faculty through the way of mind session.

• 중소기업연구
• /
• 제31권1호
• /
• pp.73-88
• /
• 2009

본 연구는 우리나라 대표적인 강소기업들을 대상으로 심층적 사례조사를 실시하여 새로운 비즈니스 영역의 창출에 필요한 정책적 과제를 도출하고자 했다. 이를 통해 경제 구조적전환기에 금융위기가 가중된 경영환경 속에서 과연 중소기업들이 어떻게 신시장을 개척하고 신성장동력을 지속적으로 유지할 수 있는지에 관해 답변해보고자 했다. 24개 강소기업들에 관한 심층적 전략분석을 토대로 이들의 성공유형과 잠재된 실패요인(성공함정)들을 조사했으며, 그 결과 한국 강소기업의 8가지 유형을 제시했다. 또한 이들의 생존비결과 그에 따른 문제점을 살펴봄으로써 향후 지속적인 경쟁력 유지를 위해 고려해야 할 당면과제들을 도출했다. 이러한 조사결과들을 토대로 우리나라 강소기업들이 신성장동력을 지속적으로 확보하기 위한 전략대안과 정책적 지원방안에 관해서 논의하였다. 이와 함께 '저탄소 녹색성장'의 국가비전에 대해서도 중소기업을 위한 기회창출이라는 차원에서 논의하였다.

• 동양고전연구
• /
• 제70호
• /
• pp.435-466
• /
• 2018

사옹원(司饔院) 분원(分院)의 공인(貢人)이었던 지규식이 1891년 1월 1일부터 1911년 윤6월 29일까지 20년 7개월에 걸쳐 거의 매일 쓴 "하재일기(荷齋日記)"에는 국내외 정세와 풍속, 의례, 분원 관련 각종 제반사항, 일상생활사 등을 다방면에 걸쳐 다양하게 기록으로 남기고 있다. 특히 지규식의 신분은 양반계층이 아닌바, 이 같은 신분으로 쓴 일기는 흔치 않다. 그런데 필자가 여기서 주목하는 것은 "하재일기"에 기록된 의례, 그 중에서도 관 혼 상 제례 관련 내용이다. 지규식은 양반이 아닌 신분으로 당시 실제로 행했던 관 혼 상 제례 관련 내용을 "하재일기"에 기록으로 남겼는바, 이러한 일기는 매우 드물 뿐만 아니라 자료적으로도 그 가치가 매우 높이 평가된다. 특히 19세기 말~20세기 초의 관 혼 상 제례의 일면을 엿볼 수 있어 여기에 초점을 맞추었다. 관례의 경우, 일반적으로 정월에 행했는데, 이 시기에는 시행시기의 다변화된 모습을 엿볼 수 있다. 이는 일부 양반가도 예외는 아니었다. 혼례의 경우, 혼사를 논의할 때 개화되어 가는 과정 때문에 그런 것인지는 몰라도 파기하는 경우가 종전보다 흔했던 것으로 보인다. 그리고 택일도 신부 집에서 정했던 것은 아니었던 것 같다. 그리고 중인들이나 평민들의 경우, 신부 집에서 혼례를 치렀지만, 부득이 한 경우에는 신랑 집에서 혼례를 치루기도 했던 것으로 보인다. 지규식 자녀들의 혼례는 전통적 절차를 비교적 충실하게 밟고 있었지만, 양가의 형편과 사정에 따라 유동적으로 적용한 것으로 보인다. 전통적 예법을 무시한 채, 상중에 혼례를 치르거나 신부를 데려와 신랑 집에서 혼례를 거행한 것은, 근대화 과정에서 외래 종교 및 외래문화의 유입과 이식, 일제의 식민통치, 특히 유교적 사회질서 쇠퇴 등도 연관성이 있는 것으로 보인다. 그리고 이 시기에는 이혼도 종전보다 흔했던 것 같다. 상례의 경우, 임종에서 발인하여 하관까지의 기간이 다양한바, 종전보다 다소 변화된 것을 확인할 수 있었다. 사대부도 보통 임종서 발인까지 3개월인데, 여기서는 7일인바 이를 안 지키는 양반가도 있었던 것으로 보인다. 그리고 오늘날 일반적으로 행하는 3일장과 초우 재우 삼우제의 흔적을 "하재일기"에서 찾을 수 있는바, 위의 자료들은 그 가치가 매우 높이 평가된다. 제례의 경우, 제사 시간이 일정하지 않았을 뿐만 아니라, 지규식은 기제사를 지내기 전에 재계(齋戒)를 안 했으며, 심지어 제사 전날 술집에 가서 애인을 만나거나 또는 술을 마시기도 하였다. 당시 양반사대부가 하고는 다소 차이를 보이고 있다. 그런데 지규식은 기독교에 입교하고 나서도 기제사를 지냈으며, 천도교에 입교한 후에도 제사를 지냈다. 한편, 지규식은 특별한 경우를 제외하고는 한식과 추석 때 직접 또는 동생이나 아들들을 보내 묘소에 가서 차례(묘제)를 지내게 했다. 그렇다고 지규식이 10월에 묘제를 지냈다는 기록은 찾아볼 수 없다. 그리고 지규식은 돌아가신 아버지를 대상으로 지내는 생일제사를 생신차례라고 하여 거의 매년 지냈다. 그런데 생신차례와 제사를 별개로 지낸 적도 있어 특이하다. 신분제도가 철폐되고 일제가 강점할 무렵의 경기도 광주지역 중인출신 집안의 기제사, 차례와 묘제, 생신차례를 지내는 모습은 양반가의 제례 관행보다는 약간 다르고 덜 엄격하지만, 양반이 아닌 집안의 제례라는 점에서 그 의의가 크다고 하겠다. 이상에서 보듯, "하재일기"에 나타난 관 혼 상 제례의 내용은 자료적으로 그 가치가 매우 높을 뿐만 아니라 민속학적으로도 의미가 크다고 하겠다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.