• 제목/요약/키워드: Power system dynamic stability

검색결과 353건 처리시간 0.019초

석탄 가스화 복합 발전 플랜트의 분류층 가스화기 제어를 위한 선형 모델 예측 제어 기법 (Linear Model Predictive Control of an Entrained-flow Gasifier for an IGCC Power Plant)

  • 이효진;이재형
    • Korean Chemical Engineering Research
    • /
    • 제52권5호
    • /
    • pp.592-602
    • /
    • 2014
  • 석탄 가스화 복합 발전(coal-based IGCC power plant)에서 가스화기의 동적 상태와 성능이 플랜트 전체에 큰 영향을 미치므로, 가스화기가 문제 없이 운전 되도록 제어 하는 것은 전체 플랜트의 가동률을 높이는 데 있어 매우 중요한 일이라 할 수 있다. 가스화기의 안정적인 운전을 위해서는 고체 슬래그 층의 두께가 일정하게 유지되어야 하는데, 고체 슬래그 두께는 실시간 측정이 불가능하기 때문에 상태를 추정하여 추론 제어해야 한다. 본 연구에서는 Shell-type 가스화기의 동적 모사 모델을 개발하고 다변수 시스템의 추론 제어를 위한 방법으로 두 가지 선형 예측 제어 기법을 적용하여 그 특성을 분석하였다. 측정되지 않는 변수의 상태 추정을 위해 Kalman 필터 기법을 이용하였다. 측정 불가능한 1차 변수를 대신하여 측정 가능한 2차 변수를 제어하는 전통적인 추론 제어 기법으로는 외란의 종류에 따라 추론 제어가 불가능 할 수 있음을 확인하였고, 측정되지 않는 슬래그 두께를 Kalman 필터 기법을 이용하여 추정하여 성능 예측에 반영하고 외란 모델을 사용하여 예측 제어하는 경우 두 가지 측정 불가능한 외란 모두에 대해 추론 제어가 가능함을 확인하였다.

외란관측기와 파라미터 보상기를 이용한 PMSM의 정밀속도제어 (Precision Speed Control of PMSM Using Disturbance Observer and Parameter Compensator)

  • 고종선;이택호;김칠환;이상설
    • 전력전자학회논문지
    • /
    • 제6권1호
    • /
    • pp.98-106
    • /
    • 2001
  • 본 논문에서는 영구자석 동기 전동기의 정밀 속도 제어의 방법으로 외란 관측기를 이용한 외란 보상방법과 파라미터 추정에 의해 보상기의 이득을 조절하도록 함으로서, 외란이 없는 등가 지표시스템의 응답 특성을 추정하도록 제안하였다. 외란 관측기에 의한 보상방법은 잘 알려진 데드비트 외란 관측기를 이용하였으며 잡음에 약한 데드비트 관측기의 단점을 보완하기 위하여 후단필터로서 MA처리를 통하여 잡음에 대한 영향을 줄이도록 하였다. 또한 관측기의 단점을 보완하기 위하여 후단필터로서 MA처리를 통하여 잡음에 대한 영향을 줄이도록 하였다. 또한 관측기의 파라미터와 실제 시스템의 파라미터의 차이로 발생하는 외란 추정 오차를 줄이고자 실제 시스템과 파라미터 보상기로 구성된 등가 시스템이 지표 시스템이 되도록 구성하였다. 시스템에 사용된 RLS파라미터 추정기는 외란에 의하여 편향된 추정 특성을 가진다. 이러한 파라미터 추정문제에 대하여 파라미터 추정기가 높은 성능을 갖는 데드비트 외란 관측기를 포함하도록 함으로서 외란에 의한 문제를 해결하였다. 이와 같이 제안된 제어기는 외란 및 파라미터 변화를 갖는 시스템에서 강인한 고정밀 제어를 할 수 있으며, 이의 안정성과 효용성을 컴퓨터를 이용한 모의 실험과 TMS320C31이 내장된 DS1102 DSP 보드를 이용하여 실험으로써 보였다.

  • PDF

농업용 트랙터의 프론트 로더 충격 저감을 위한 유압 회로의 설계 개선 (Improved Design of Hydraulic Circuit of Front-end Loader for Bump Shock Reduction of an Agricultural Tractor)

  • 조봉진;안성욱;이창주;윤영환;이수성;김학진
    • 드라이브 ㆍ 컨트롤
    • /
    • 제13권2호
    • /
    • pp.10-18
    • /
    • 2016
  • A front-end loader (FEL) mounted on an agricultural tractor is one of the most commonly used implements to mechanize routine agricultural tasks. When the FEL is used with a loaded bucket, careful operation is required to maintain safety and avoid spillage when the tractor passes a bump because a change in the gravity center of the tractor due to varied loadings can affect the stability of the tractor. Use of a boom suspension system consisting of accumulators and orifice dampers can be instrumental in reducing pitching vibrations while increasing the handling performance of the FEL-mounted tractor. The objective of this research was to reduce bump shocks by adding an orifice and a flow control valve to the original hydraulic circuit composed solely of accumulators. A simulation study was performed using the SimulationX program to investigate the effects of an accumulator and an orifice-throttle damper on bump shocks. Results showed that the peak pressure on a boom cylinder and the vertical acceleration of a bucket were significantly affected by use of both an accumulator and an orifice damper. In a field test conducted with a 75-kW tractor, the peak pressure of the boom cylinder, and the root mean square (RMS) vertical acceleration of the bucket and seat were reduced by on average, 23.0, 42.2, and 44.9% respectively, as compared to those measured with the original accumulator system, showing that an improved design for the accumulator hydraulic circuit can reduce bump shocks. Further studies are needed to design a tractor suspension system that includes the effects of cabin suspension and tires as well as dynamic analysis.