• Elastomers and Composites
• /
• 제35권4호
• /
• pp.296-302
• /
• 2000

신발 중창용 EVA 발포체의 수용성 폴리우레탄계 접착제에 대한 접착력을 증가시키기 위하여 발포체 표면을 저온 플라즈마 처리하였다. 플라즈마 처리기체 종류, 플라즈마 처리시간, 전극과 시료와의 거리등의 조건에 따른 발포체의 표면형태, 접촉각 및 수성폴리우레탄에 대한 접착력 등을 주사전자현미경, 접촉각 측정기, 인장강도시험기 등을 사용하여 측정하였다. 플라즈마 처리시간이 증가함에 따라 플라즈마 에칭에 의한 표면 형태의 변화가 더욱 뚜렷하게 나타났으며, 물로 측정한 발포체의 표면 접촉각은 현저히 감소하였다. 플라즈마 처리시간이 증가함에 따라 접착력은 현저히 증가하였다.

• 멤브레인
• /
• 제14권2호
• /
• pp.142-148
• /
• 2004

본 연구는 호흡부전환자를 위한 진동형 혈관 내 폐 보조장치를 사용하여 산소전달효율을 향상시키기 위한 연구이다. 유량은 점프와 유량을 사용하여 조정하였다. 가진 장치는 압전 진동자, 함수 발생기와 전력 증폭기로 구성하였다. 기체의 유량은 120 cm 길이의 중공사를 통하여 6 L/min까지 하였으며 압전 진동자로 가진 하였다. PVDF 센서와 FRF를 사용하여 VIVLAD에서 발생하는 주파수를 검출하였다. 실험결과, 최대 진폭이 발생하고 중공사들에 진동이 전달되어 최대 산소전달속도가 발생함을 확인할 수 있었다. 이 최대 진폭은 다양한 유속과 각각의 모듈에서 35 Hz 영역에서 발생함을 확인할 수 있었다.

• 한국강구조학회 논문집
• /
• 제26권5호
• /
• pp.375-383
• /
• 2014

최근 자전거나 보행자들이 쉽고 편리하게 이동 할 수 있는 보도교와 미관중심의 보도교가 가설되고 있다. 그러나 보행자의 보행이 보도교의 고유진동수와 근접할 경우 공진현상에 의해 큰 진폭이 발생하여 보행자에게 보행시 불안감을 조성시킨다. 그러나 보행시 진동에 따른 연구는 매우 미약하다. 따라서 휴대용 진동계측기를 통하여 서울시에 가설된 65개소의 보도교를 대상으로 공진발생에 따른 고유진동수를 분석하였고 경간별 고유진동수 상관관계와 구조시스템에 따른 경간과 고유진동수의 상관관계를 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.668-670
• /
• 1999

We have developed a automatic surface inspection system for cold Rolled strips in steel making process for several years. We have experienced the various kinds of surface inspection systems, including linear CCD camera type and the laser type inspection system which was installed in cold rolled strips production lines. But, we did not satisfied with these inspection systems owing to insufficient detection and classification rate, real time processing performance and limited line speed of real production lines. In order to increase detection and computing power, we have used the Dark Field illumination with Infra_Red LED, Bright Field illumination with Xenon Lamp, Parallel Computing Processor with Area typed CCD camera and full software based image processing technique for the ease up_grading and maintenance. In this paper, we introduced the automatic inspection system and real time image processing technique using the Object Detection, Defect Detection, Classification algorithms. As a result of experiment, under the situation of the high speed processed line(max 1000 meter per minute) defect detection is above 90% for all occurred defects in real line, defect name classification rate is about 80% for most frequently occurred 8 defect, and defect grade classification rate is 84% for name classified defect.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.91-91
• /
• 2010

In this paper, nano composites material is produced by adding MgO with particle size of 5 [nm] into epoxy resign using as insulating material of power transformer apparatus and molding part to study the volume resistivity of nano composites used epoxy. We measured the volume resistivity using the High Resistance Meter(4329A) depending on changing the amount of addition and temperature in this experience. In result, we have confirmed that 1.0, 3.0, 5.0 and 10.0 [wt%] as about 2.9, 7.6, 7.5 and 6.1 times increased than virgin. Therefore, the characteristic of volume resistivity was relatively stable as specimen by added 3.0 [wt%] than the others.

• 천문학회지
• /
• 제47권6호
• /
• pp.201-207
• /
• 2014

We report the development of solar flux receivers operating at 2.8 GHz to monitor solar radio activity. Radio waves from the sun are amplified, filtered, and then transmitted to a power meter sensor without frequency down-conversion. To measure solar flux, a calibration scheme is designed with a noise source, an ambient load, and a hot load at $100^{\circ}C$. The receiver is attached to a 1.8 m parabolic antenna in Icheon, owned by National Radio Research Agency, and observation is being conducted during day time on a daily basis. We compare the solar fluxes measured for last seven months with solar fluxes obtained by DRAO in Penticton, Canada, and by the Hiraiso solar observatory in Japan, and finally establish equations to convert observed flux to the so-called Penticton flux with an accuracy better than 3.2 sfu.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.453-460
• /
• 2000

A test rig is developed for performance test of 1 stage axial-type turbine which is designed by meanline analysis, streamline curvature method, and blade design method using configuration parameters. The purpose of this study is to find the best configuration parameters for designing a high efficiency axial-type turbine blade. To measure the efficiency of turbine stage, a dynamo-meter is installed. Two different stators which are manufactured as an integrated type are developed, and a rotor blade and 5 sets disc are developed for setting different stagger angle. The tip and hub diameters of the test turbine are 300 and 206.4mm, respectively. The rotating speed is 1800RPM, and the extracted power is 2.5kW. Flow coefficient is 1.68 and the reaction factor at meanline is 0.373. The number of stator and rotor of test turbine are 31 and 41, respectively. The Mach number of stator exit flow near hub is 0.164.

• 전기전자학회논문지
• /
• 제13권3호
• /
• pp.95-102
• /
• 2009

TETRA(TErrestrial Trunked RAdio)는 국내 전력 IT 무선 기간망에 적용된 ETSI(European Telecommunication Standard Institute)가 정한 디지털 주파수공용통신(TRS, Trunked Radio System) 기술로서 공중망 및 기간망에 적용되고 있는 무선통신시스템이다. DLMS(Device Language Message Specification)는 전기 계량기 값을 검침하기 위해 쓰인다. 본 논문에서는 윈도우 기반의 DLMS Server와 Client Simulator를 사용하였다. 또한 DLMS Server Simulator와 Client Simulator 간의 RS-232C 기반의 통신을 TETRA PEI 기반의 통신으로 변환하는 다기능 게이트웨이를 개발하여 TETRA 기반 DLMS 원방 감시 시스템을 구축하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.270-272
• /
• 1997

In order to a study on the electrical properties of silicone gel due to the curing condition, the volume resistivity test is researched. For experiment, we have made up several samples of different curing temperature and time such as 1[H], 2[H] at 125[$^{\circ}C$], 150[$^{\circ}C$], 160[$^{\circ}C$], 170[$^{\circ}C$], 180[$^{\circ}C$]. A measurement of volume resistivity using the VMG-1000 highmegohm meter is recorded after 10 minutes when the each voltage, and DC 500[V] and 1000[V] is applied. A coaxial cylindrical liquid electrode to measure volume resistivity of specimen is used, and its geometric capacitance is 2[pF]. As a result of the experiment, the electrical properties of specimen cured at 170[$^{\circ}C$] for 2[H] is superior.

• 한국멀티미디어학회논문지
• /
• 제16권5호
• /
• pp.566-576
• /
• 2013

In Home Area Network (HAN) of the smart grid, Power Line Communication (PLC) technology and ZigBee communication technology can be used in the communication among the Advanced Metering Infrastructure (AMI) devices. However, according to performance evaluation results of the PLC technology, we find that using the PLC technology is unsuitable for the remote meter reading service. It is worth noting that some parts of the PLC are converted to the ZigBee communication technology in Jeju, Korea. Compared with PLC, ZigBee has no restriction of the place, where the equipments can be freely set up, due to the advantage of radio communication. However, number of usable devices will impact the network performance which is depended on the address assignment. In addition, due to the restriction of transmission range among devices, it is difficult to apply the ZigBee address assignment method to the practical circumstance. In this paper, we examine the previous ZigBee address assignment schemes and the corresponding routing algorithms, and propose a novel address assignment scheme compared with the existing methods, the performance of the proposed one is improved. In particular, evaluation results show that the proposed scheme reduces the average number of hop count, the transfer time and the processing time.