• 제목/요약/키워드: Power arc

검색결과 809건 처리시간 0.029초

용강 중 Al 최대 농도에 대한 Al 드로스 장입 조건의 영향: 전기로 공정 내 화학 에너지 향상을 위한 기반 연구 (Influence of Charging Condition of Al-dross on Maximum Concentration of Al in Molten Steel : Fundamental study for improvement of chemical energy in EAF process)

  • 김규완;김선중
    • 자원리싸이클링
    • /
    • 제28권4호
    • /
    • pp.44-50
    • /
    • 2019
  • 국내 전기로 공정에서 산화 반응열 및 탄소 연소열 등으로 인한 화학에너지는 전체 투입 에너지 대비 30%정도로 알려져 있다. 전기로에서 $CO_2$를 저감하기 위해서는 전기로 용해 구간 중에 사용되는 전력에너지를 줄이고 화학에너지 사용을 높여야 한다. 일반적으로 용강 중 탄소를 단독으로 투입할 경우, 탄소가 용강에 용해되기 전 낮은 밀도로 인해 슬래그 층으로 부유한다. 용강 중 탄소 농도가 높을 시 취입하는 산소와 용강 중 탄소의 연소반응으로 인해 전력에너지를 낮추며 화학에너지 사용량을 높일 수 있다. 따라서 탄소 연소열의 효율을 높이기 위해서는 용강 중 새로운 탄재 장입 조건이 필요하다. 한편, Al 제련 후의 부산물로 알려져 있는 Al 드로스는 금속성 Al을 25 mass% 이상 함유하고 있으며 Al은 탄소와 비교하여 높은 산화열을 가지고 있다. 그러나 Al 드로스는 재활용이 어려워 거의 매립하고 있으며, Al 드로스 내 Al의 산화열을 효과적으로 활용하기 위해서는 철강 공정 적용에 대한 연구가 필요하다. 본 연구에서는 화학 에너지의 활용 증대를 위한 기반연구로서, 분코크스와 Al 드로스를 화학에너지 연료로서 활용하여 다양한 배합비 및 반응 온도에서 용강 중 탄소 및 알루미늄의 용해 농도와 용해효율을 조사하였다.

Zn-Al 합금 선재를 이용한 금속용사 공법 적용 콘크리트의 전자파 차폐 성능 평가에 관한 실험적 연구 (An Experimental Study on the Evaluation of EMP Shielding Performance of Concrete Applied with ATMSM Using Zn-Al Alloy Wire)

  • 최현준;박진호;민태범;장현오;이한승
    • 한국건축시공학회지
    • /
    • 제19권3호
    • /
    • pp.209-217
    • /
    • 2019
  • EMP(Electromagnetic Pulse)는 통상적으로 고출력 전자기파 (High Power Electromagnetic: HPEM)를 의미한다. EMP를 차폐하기 위한 차폐 판의 경우, 현장 적용 시, 용접 및 볼트의 연결부(접합부)에서 시공자의 숙련도 및 불량시공, 차폐판의 변형 등으로 인한 전자파 차폐성능 저하의 가능성을 유발하고 있으며, 또한 벽체로부터 이격거리로 인한 비효율적인 공간 활용이 문제점으로 지적 되고 있다. 따라서, 본 연구는 콘크리트 벽체를 대상으로 반사손실에 대한 전자파 차폐성능을 확보하기 위한 일환으로서, 콘크리트에 금속용사 공법을 적용하여 최적의 전자파 차폐 조건을 도출하고자 한다. 실험변수로는 콘크리트 벽체 두께, Zn-Al 금속용사 적용 유무이다. 콘크리트 벽체의 경우, 일반적으로 적용되어지고 있는 벽체 두께인 100~300mm이며, 또한 전자파 차폐성능에 관한 Zn-Al 금속용사 공법의 실효성을 평가하기 위해 적용 유무로 구분하여 실험변수를 설정하였다. 실험 결과 두께가 증가할수록 흡수 손실의 증가로 인해 전자파 차폐성능이 증가하였다. 또한 Zn-Al 금속용사 적용 후 모든 시험체에서 평균 56.68 dB의 상당한 차폐성능 증가를 보였으며, 이는 금속용사 피막의 반사손실에 의하여 증가된 것으로 판단된다. 또한, 전도성 혼입재료와 금속 용사 피막을 동시에 적용할 경우 보다 우수한 차폐성능을 나타낼 것으로 판단된다.

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF

재생잔골재 및 플라이애시 대체율에 따른 재생콘크리트의 공학적 특성 및 내구성능에 관한 연구 (A Study on the Engineering Property and Durability of Recycled Concrete with Replacement Ratio of Recycled Fine Aggregate and Fly-ash)

  • 김무한;김규용;김재환;조봉석;김영선;문형재
    • 한국건설순환자원학회논문집
    • /
    • 제1권1호
    • /
    • pp.89-97
    • /
    • 2005
  • 최근 천연골재 자원의 고갈과 환경규제의 강화로 인해 콘크리트용 잔골재의 수급문제가 건설산업분야에서 시급히 해결해야할 문제로 대두되고 있어 폐기콘크리트를 활용한 재생잔골재의 콘크리트용 잔골재로의 활용을 위한 연구가 활발히 진행되고 있다. 한편 화학발전소 및 열병합발전소에서 발생되는 석탄회는 그 발생량이 계속적으로 증가하고 있으며, 석탄회중 플라이애시를 콘크리트용 혼화재료로서 사용할 경우 시공성 및 점성 개선, 장기강도 증가 및 수화열 저감 등 많은 장점으로 인하여 보통 콘크리트에서의 활용이 증가하고 있는 실정이나, 재생콘크리트의 혼화재로 활용하기 위한 연구는 미미한 실정이다. 따라서 본 연구에 서는 재생잔골재 및 플라이애시 대체율에 따른 굳지않은 특성, 경화특성, 내구특성을 실험 실증적으로 검토 분석함으로서 재생잔골재를 콘크리트용 잔골재로 활용할 수 있을 뿐만 아니라 플라이애시를 재생콘크리트의 혼화재로 활용하기 위한 기초자료를 제시하고자 하였다. 연구 결과 재생잔골재를 대체한 경우 굳지않은 성상, 정화성상 및 내구성상이 재생잔골재 100%을 치환했을 때 천연잔골재를 사용한 콘크리트와 유사한 수준으로 나타나 콘크리트용 잔골재로서 재생산골재의 활용이 가능한 것으로 사료되었으며, 플라이애시를 고품질 재생잔골재를 사용한 재생콘크리트용 혼화재로 활용함으로서 시공성, 공학적 특성 및 내구특성 등의 성능이 향상되는 것을 확인할 수 있었다.

  • PDF

NCW 환경에서 C4I 체계 전투력 상승효과 평가 알고리즘 : 기술 및 인적 요소 고려 (A Combat Effectiveness Evaluation Algorithm Considering Technical and Human Factors in C4I System)

  • 정환식;박건우;이재영;이상훈
    • 지능정보연구
    • /
    • 제16권2호
    • /
    • pp.55-72
    • /
    • 2010
  • 최근, NCW에 적합한 C4I 체계의 전투력 상승효과 평가의 필요성이 제기되고 있다. 기존의연구는 체계 자체에 중점을 두었으며, 인적 요소를 중요한 요소로 고려하지 않았다. 따라서, C4I 체계의 전투력 상승효과 평가 시 기술 및 인적 요소를 고려하여 평가하는 것이 필요한 시점이라고 할 수 있다. 이에 본 연구에서는 E-TechMan(A Combat Effectiveness Evaluation Algorithm Considering Technical and Human Factors in C4I System)이라 불리는 전투력 상승효과 평가 알고리즘을 제안한다. E-TechMan 알고리즘은 합동화력체계(Joint Fire Operating System-Korea)에 적용되어 전투력 상승효과를 평가해보았다. 또한, 기존의 연구방법인 C2 이론 및 고전 역학에 의한 결과와 비교를 하였다. 본 연구는 인적요소에 의한 영향을 반영함으로써 기존의 연구보다 현실적인 전투력 상승효과 결과를 제시했다는데 가치가 있다.

$Fe_{1-x}Co_x$계의 결정구조와 자기적인 성질 (The Crystallographic and Magnetic Properties of $Fe_{1-x}Co_x$System)

  • 김정기;한경훈;서정철
    • 한국자기학회지
    • /
    • 제9권4호
    • /
    • pp.190-195
    • /
    • 1999
  • 최대 출력 3.5kW인 고주파에 의한 알곤 플라즈마 분위기에서 제작한 Fe1-xCox(x=0.2와 0.4)계와 25$\mu\textrm{m}$의 철 박막의 자기적인 성질을 상온에서의 X선 회절과 진동시료자력계를 이용한 자기이력곡선 측정 방법을 사용하여 연구하였다. arc로에서 제작된 시룐느 삼단계 처리 가공하였다. 첫째는 수압기로 9,000N/$\textrm{cm}^2$의 압력을 가하여 알약 형태로 만들었다. 이 단계는 압연기로 눌러 얇은 sheet로 만들었다. 삼단계는 시료는 질소 가스 분위기에서 90$0^{\circ}C$로 열처리하였다. 일단계 시료의 X선 회절결과는 시료가 균질이며 각 시료는 철과 동일한 bcc 결정구조를 갖는 단일결저상(single crystal phase)임을 보였다. 철 박막은 43 Oe의 항자력과 인가자기장에 대한 자화, 즉 초기 기울기는 0.328 emu/gOe를 나타냈다. 이단계 시료에서는 Co량이 증가함에 따라 항자력과 포화자화값은 증가하였다. 반면 초기 기울기는 감소하였다. 이는 항자력의 증가로 인해서 계면이동이 억제되었음을 의미한다. 삼단계 시료에서 두 시료 모두 포화자화값은 증가하였다. 반면 이들 시료의 항자력은 감소하였다. 3단계 시료의 포화자화의 열처리로 인한 시료의 X선 회절강도 변화와 연관이 있어 보인다. 또한 몇 개의 자기 매개변수를 단순모형을 써서 계산하여 다른값과 비교하였다.

  • PDF

조합식(組合式) 정백(精白)시스템의 설계(設計) 및 작동인자(作動因子)에 관(關)한 연구(硏究)(II) -작동기준(作動基準) 설정(設定)- (A Study on Design and Operational Factors of Rice Whitening Systems Consisting of Abrasive and Frictional Whiteners -Operational Criteria-)

  • 노상하;고학균;이종환;박승제
    • Journal of Biosystems Engineering
    • /
    • 제12권2호
    • /
    • pp.28-37
    • /
    • 1987
  • Operation of rice whiteners has been depending on operator's experience only and very limitted data are available for operational criteria of rice whiteners in Korea. With developments of new rice varieties and with a tendency of automation of machine operations for precision control, operational criteria depending on physical characteristics of rice grains arc required for an improvement of milled rice recovery and the performance of rice whitening systems. An experimental study was conducted to identify operational criteria of a rice whitening system consisted with an abrasive-aerated whitener developed newly and a frictional-aerated whitener being used commercially. Further, comparisons were made between the performance of the rice whitening system adopted for this study and a commercial system used in small scale milling plants. Results of this study are summarized as follows: 1. Total number of passes necessary for the final white rice in the combined whitening system depended exclusively on the counter pressure level of the frictional whitener successive to the abrasive whitener. 2. The counter pressure required for whitening Japonica type rice variety (Akibare) was higher by about 1.6 times than that for Japonica type (Pung-san), when other conditions were kept at the same. 3. Radial pressure in the whitening chamber of the frictional whitener should be maintained between 1.5 to $2.1kg/cm^2$ for the completion of whitening within 5 to 3 passes regardless of rice varieties. Hence, it was found that the radial pressure in the whitening chamber could be used as an operational criteria to control the counter pressure level. 4. The following regression equation was found between radial pressure($R_p$) in whitening chamber and electric power consumption of the whitening system: $$EPC=-0.545\;R^2_p+1.277\;R_p+0.874[KWH/100kg]$$ 5. The following multiple regression equation was found among radial pressure ($R_p$), counter pressure ($C_p$), and bioyield point ($B_i$), length (L) and width (W) of brown rice. $$R_p/(B_i/W^2)=0.547\{C_p/(B_i/W^2)\}^{0.365}(L/W)^{0.120}(R^2=0.9897)$$ 6. The milled rice recovery and machine efficiency (kg/KWH) from the combined whitening system were higher by about 2.0% point and by 15 to 27% point than those from the conventional system, respectively.

  • PDF

Impedance Spectroscopy Models for X5R Multilayer Ceramic Capacitors

  • Lee, Jong-Sook;Shin, Eui-Chol;Shin, Dong-Kyu;Kim, Yong;Ahn, Pyung-An;Seo, Hyun-Ho;Jo, Jung-Mo;Kim, Jee-Hoon;Kim, Gye-Rok;Kim, Young-Hun;Park, Ji-Young;Kim, Chang-Hoon;Hong, Jeong-Oh;Hur, Kang-Heon
    • 한국세라믹학회지
    • /
    • 제49권5호
    • /
    • pp.475-483
    • /
    • 2012
  • High capacitance X5R MLCCs based on $BaTiO_3$ ceramic dielectric layers exhibit a single broad, asymmetric arc shape impedance and modulus response over the wide frequency range between 1 MHz to 0.01 Hz. Analysis according to the conventional brick-layer model for polycrystalline conductors employing a series connection of multiple RC parallel circuits leads to parameters associated with large errors and of little physical significance. A new parametric impedance model is shown to satisfactorily describe the experimental spectra, which is a parallel network of one resistor R representing the DC conductivity thermally activated by 1.32 eV, one ideal capacitor C exactly representing bulk capacitance, and a constant phase element (CPE) Q with complex capacitance $A(i{\omega})^{{\alpha}-1}$ with ${\alpha}$ close to 2/3 and A thermally activated by 0.45 eV or ca. 1/3 of activation energy of DC conductivity. The feature strongly indicate the CK1 model by J. R. Macdonald, where the CPE with 2/3 power-law exponent represents the polarization effects originating from mobile charge carriers. The CPE term is suggested to be directly related to the trapping of the electronic charge carriers and indirectly related to the ionic defects responsible for the insulation resistance degradation.

질소 보호 가스 첨가가 하이퍼 듀플렉스 스테인리스 밀봉용접재의 마모부식 저항성에 미치는 영향 (Influence of the nitrogen gas addition in the Ar shielding gas on the erosion-corrosion of tube-to-tube sheet welds of hyper duplex stainless steel)

  • 김혜진;전순혁;김순태;이인성;박용수
    • Corrosion Science and Technology
    • /
    • 제13권2호
    • /
    • pp.70-80
    • /
    • 2014
  • Duplex stainless steels with nearly equal fraction of the ferrite(${\alpha}$) phase and austenite(${\gamma}$) phase have been increasingly used for various applications such as power plants, desalination facilities due to their high resistance to corrosion, good weldability, and excellent mechanical properties. Hyper duplex stainless steel (HDSS) is defined as the future duplex stainless steel with a pitting resistance equivalent (PRE=wt.%Cr+3.3(wt.%Mo+0.5wt.%W)+30wt.%N) of above 50. However, when HDSS is welded with gas tungsten arc (GTA), incorporation of nitrogen in the Ar shielding gas are very important because the volume fraction of ${\alpha}$-phase and ${\gamma}$-phase is changed and harmful secondary phases can be formed in the welded zone. In other words, the balance of corrosion resistance between two phases and reduction of $Cr_2N$ are the key points of this study. The primary results of this study are as follows. The addition of $N_2$ to the Ar shielding gas provides phase balance under weld-cooling conditions and increases the transformation temperature of the ${\alpha}$-phase to ${\gamma}$-phase, increasing the fraction of ${\gamma}$-phase as well as decreasing the precipitation of $Cr_2N$. In the anodic polarization test, the addition of nitrogen gas in the Ar shielding gas improved values of the electrochemical parameters, compared to the Pure Ar. Also, in the erosion-corrosion test, the HDSS welded with shielding gas containing $N_2$ decreased the weight loss, compared to HDSS welded with the Ar pure gas. This result showed the resistance of erosion-corrosion was increased due to increasing the fraction of ${\gamma}$-phase and the stability of passive film according to the addition $N_2$ gas to the Ar shielding gas. As a result, the addition of nitrogen gas to the shielding gas improved the resistance of erosion-corrosion.

3차원 도시공간정보를 이용한 도시열섬현상의 분석 (Analysis of Urban Heat Island Effect Using Information from 3-Dimensional City Model (3DCM))

  • 전범석;김학열
    • Spatial Information Research
    • /
    • 제18권4호
    • /
    • pp.1-11
    • /
    • 2010
  • 본 연구는 2차원적 도시특성변수를 이용한 기존 선행연구와 달리, 도시기하학적인 특성을 중심으로 도시열섬현상에 관한 설명모형을 구축하고 이에 대한 정책적 시사점을 제시하고 자하는 연구이다. 오하이오주 콜럼버스 도시(Columbus, Ohio)의 3차원 도시공간구축을 위하여 LiDAR 데이터가 활용되었고, 건축물의 외부공간을 구축하기 위하여 건물수치지도가 이용되었다. 또한 식생지수와 도시온도 자료를 추출하기 위하여 Landsat TM 영상의 band 3, band 4, Thermal band 가 이용되었다. 복잡한 자료 추출 과정을 통해 획득된 6가지 변수들(건물의 총 부피, 건물의 총 표면적, 평균 건물의 높이-도로폭 비율, 공극률, 건물바닥면적비율, 식생지수)을 도입하여 단순회귀 및 다중회귀 모형을 구축하였다. 회귀모형구축에 있어서는 비선형관계에 있는 변수를 선형화하기 위해 Box-Tidwell 변형기법을 적용하였으며 최적화된 변수변형을 통한 선형회귀모형을 구축하였다. 공극률, 식생지수, 건축 표면적 변수로 추정된 다중회귀모형은 전체 온도변이의 57%를 설명할 수 있는 것으로 나타났으며, 도시열섬을 저감시키기 위한 다양한 정책수립(오픈스페이스 확대정책, 옥상녹화, 벽면녹화 등)에 의미있는 결과를 제공하였다.