• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.69-74
• /
• 2017

In the current machining industry, machining precision is necessary and machining is being carried out. In this ultra-precision machining industry, the fixation of the workpiece is very important and the degree of machining depends on the degree of fixation of the workpiece. In ultra-precision machining, various methods, such as using a vise chuck or the like and using bolt nut coupling, are used for fixing a workpiece to an existing machine tool. In particular, when the precision gripping force of the jig is insufficient during machining of the ultra-precision mold parts, the machining material shakes due to the vibration or friction, and the machining precision is lowered. In the ultra-precision machining of power transmission parts, such as gears, the accuracy of the product is then determined. In addition, the amount of heat generated during machining has a significant effect on the machining accuracy. This is because the vibration value changes according to the grasp force of the jig that fixes the workpiece, and the change in the calorific value due to the change in the main shaft rotation speed of the ultra-precision machining. The increase in the spindle rotation speed during machining decreased the heat generation during machining, and the machining accuracy was also good, and it was confirmed that the machining heat changed according to the fixed state of the workpiece and the machining accuracy also changed. In this study, we try to optimize the driving part of the power vise by using structural analysis, rather than the power vise, using the basic mechanical-type power unit.

• 전기의세계
• /
• 제27권6호
• /
• pp.54-57
• /
• 1978

An analytical investigation has been carried out for the motion of moving element in electro-dynamometer type directional power relay under A.C source. For the more a time dependent kinetic performance of the element can also be deduced for the D.C component in fault current. The results obtained thus for show that, in the relay with stopper, the performance time for the equal D.C and A.C component can be shorten ca. 0.5Hz in comparison with the fact, the performance time exhibits to delay ca. 0.75Hz under the same conditions for the case of the relay without stopper, it appear that these differences of performance times will not give vise any difficultys for the apects of practical case, however, the obtain results can be applicable in the course of the design of the relay.

• 대한화학회지
• /
• 제43권2호
• /
• pp.182-192
• /
• 1999

글로우 방전(Glow Discharge, GD)과 유도결합플라스마(Inductively Coupled Plasma, ICP)-원자 방출분광법(Atomic Emission Spectrometer, AES)에서 사용되는 새로운 장치를 개발하였다. ICP-AES에서 GDAES로 전환하는 데 불과 15분 정도 소요되기 때문에, 고체 시료 및 액체시료에 포함된 극미량 원소분석을 신속하게 수행할 수 있다. 실험변수 중에서 냉각기체 유속, 시료운반기체 유속, 절단기체 유속, 보조기체 유속, 측정깊이, 이온 통과관 크기, 그리고 rf 전원의 세기 변화에 따른 원자 방출 복사선 변화에 미치는 영향을 조사 연구하였다. Cd(I) 228.8 nm, Mn(II) 257.61 nm, and Fe(II) 259.95 nm에서 측정한 검출한계는 각각 3.86, 1.49, 5.79 ppb로 측정되었으며, 직선성은 1.000으로서 우수하였다.