• Nuclear Engineering and Technology
• /
• 제37권2호
• /
• pp.167-176
• /
• 2005

We developed the PERUPS system to aid the on-line performance analysis for the turbine cycle of the YongGwang 3 and 4 nuclear power plants. Procedure of measurement validation is included in the performance calculation to obtain heat balance. Precision of on-line performance calculation is increased via practical modifications of standard calculation algorithms based on the PTC (Performance Test Code). The proposed system also provides useful Web-based aids for performance analysis, including performance data management, a graphic viewer for heat balance and turbine expansion lines, and synthesized reports of performance.

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1314-1323
• /
• 2018

For nuclear power plants (NPPs) to have long lifetimes, ageing is a major issue. Currently, ageing management for NPP systems is based on correlations built from generic experimental data. However, each system has its own characteristics, operational history, and environment. To account for this, it is possible to resort to prognostics that predicts the future state and time to failure (TTF) of the target system by updating the generic correlation with specific information of the target system. In this paper, we present an application of particle filtering for the prediction of degradation in steam generator tubes. With a case study, we also show how the prediction results vary depending on the uncertainty of the measurement data.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.225-228
• /
• 2016

KRISS-V, a V-band millimeter-wave source module for a primary RF power standard and calibration system developed by the Korea Research Institute of Standards and Science is here presented. The output power of KRISS-V is several times higher than that of commercial amplifier/multiplier chains and is highly stable (the standard deviations of output power are less than 0.01% in the worst case). The spectral purity of KRISS-V is high enough to consider it a single-tone signal generator. We also added programmable attenuation capability to KRISS-V for remote power control. Moreover, the in-house source module is cost-effective and adaptable to various measurement schemes. The structure of the model as well as detailed component information are introduced so that it can be reproduced.

• 한국정보전자통신기술학회논문지
• /
• 제6권3호
• /
• pp.174-182
• /
• 2013

The power wheelchair is an important and convenient mobility device. The demand of power wheelchair is increasing for assistance in mobility. In this paper we proposed a robotic wheelchair for mobility aid to reduce the burden from the disabled. The main issue in an autonomous wheelchair is the automatic detection and avoidance of obstacles and going to the pre-designated place. The proposed algorithm detects the obstacles and avoids them to drive the wheelchair to the desired place safely with panning scan from sensors of distance measurement and fuzzy control. By this way, the disabled will not always have to worry about paying deep attention to the surroundings and his path.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1043-1047
• /
• 2003

Most of the measurement and the evaluation of hand-transmitted vibration have been performed by using a small size single axis accelerometer between the handle and the hand palm or a three axis accelerometer attached on an adapter outside the hand(indirect measurement). It is most desirable for the correct evaluation of hand-transmitted vibration form the power tool handle to measure the acceleration between the handle surface and the hand palm in the three axis(direct measurement) as recommended in ISO 5349-1. In the study three axes acceleration measurement device was developed of which the thickness was less than 7mm so that it can be placed between the handle and the palm without any inconvenience during the measurement. To verify the performance of the developed device, measured acceleration by the two methods, direct and indirect, were compared in the study.

• 한국전자파학회논문지
• /
• 제29권12호
• /
• pp.942-952
• /
• 2018

국내에서 개발되고 있는 도시철도용 무선 전달 공급 시스템은 60 kHz 자기장을 이용하여 객차에 전력을 공급한다. 무선 전력 전송 시 발생되는 전자기장에 인체가 노출될 때, 전자기장 세기는 인체 안전성 기준을 만족해야 한다. 하지만 도시철도용 무선 급집전 시스템에서 발생하는 전자기장에 대한 측정 방법과 인체 안전성 평가 방법이 아직 확립되지 않았다. 본 논문에서는 도시철도용 무선 급집전 시스템에서 발생되는 전자기장 측정 방법 및 인체 안전성 평가 방법을 제안하였다. 제안된 측정 방법에 따라 무선 급집전 시스템 시험선로에서 발생되는 전자기장을 측정하고, 전자기장 인체 보호기준치와 비교하였다.

• 한국소프트웨어감정평가학회 논문지
• /
• 제16권2호
• /
• pp.127-133
• /
• 2020

인공지능의 활용성이 다양해지면서 소형 휴대용기기에 알고리즘을 탑재하려는 요구가 증가하고 있다. 또한 임베디드 시스템이 고성능화하면서 운영체제는 물론 고속연산 및 머신러닝의 알고리즘 구현이 가능해 지고 있다. 그러나 반복연산과 방대한 학습데이터를 처리하는 머신러닝알고리즘의 특성으로 네트워크 연결에 의한 클라우드 환경에 의존하고 있다. 임베디드 시스템에서의 독자적인 운영을 위해서는 저 전력화 및 최적화 알고리즘에 의한 빠른 실행이 요구된다. 본 연구에서는 스마트 제어를 목적으로 임베디드 시스템에 에너지 측정용 센서를 연결하고, 실시간 측정 및 모니터링 시스템으로 측정정보를 데이터베이스로 저장하는 장치를 구현하였다. 연속적으로 측정되어 저장된 데이터는 학습 알고리즘에 적용하여, 최적화 전력제어에 활용가능하며, 에너지 측정에 요구되는 다양한 센서의 인터페이스가 가능한 시스템을 구성하였다.

• 조명전기설비학회논문지
• /
• 제17권6호
• /
• pp.130-137
• /
• 2003

고조파에 의한 전력품질저하로 인해 전기설비의 성능저하, 소음, 진동 등의 장해현상이 발생한다. 또한 앞으로 에너지 이용 효율을 높이기 위한 대책으로 반도체 회로를 사용하는 에너지 절약장치가 널리 보급되고, 전동기 속도 제어장치, 에너지 저장장치 등 에너지 변환장치의 사용이 증가될 전망이어서 고조파의 발생은 필연적이며 그 문제점은 심각하게 대두될 것이다. 이러한 고조파에 의한 장애를 해결하기 위해서는 전압, 전류, 전력, 역률, 고조파 차수별 성분 및 고조파 총합 왜형률 등의 정확한 전력품질을 측정하고 분석할 필요가 있다. 본 연구에서는 이러한 고조파 관련 전력품질을 측정하고 분석할 수 있는 저가형 측정시스템을 개발하였으며 3상 4선식 계통에서 전력품질을 측정하고 분석함으로써 그 성능을 입증하였다.

• 한국전자통신학회논문지
• /
• 제4권1호
• /
• pp.37-45
• /
• 2009

The power wheelchair is an important and convenient mobility device. The demand of power wheelchair is increasing for assistance in mobility. In this paper we proposed a robotic wheelchair for mobility aid to reduce the burden from the disabled. The main issue in an autonomous wheelchair is the automatic detection and avoidance of obstacles and going to the pre-designated place. The proposed algorithm detects the obstacles and avoids them to drive the wheelchair to the desired place safely with panning scan from sensors of distance measurement and fuzzy control. By this way, the disabled will not always have to worry about paying deep attention to the surroundings and his path.

• 전력전자학회논문지
• /
• 제24권5호
• /
• pp.356-364
• /
• 2019

In this study, major problems, such as licensing problems due to civil complaints, deterioration of facility period, and damage of modules, are exposed to many problems in domestic businesses. Particularly, the photovoltaic (PV) modules applied to early PV systems have been repaired and replaced over the past two decades, and a new module-based aging detection method is needed to expand the maintenance market and stabilize and repair power supplies. PV modules in a PV system use a string that is configured in series to generate high voltage. However, even if only one module of the solar modules connected in series ages, the power generation efficiency of the aged string is reduced. Therefore, we propose a topology that can measure the instantaneous PV characteristic curve to determine the aging module in the solar string and the aging judgment algorithm using the measured PV characteristic curve.