• Journal of the Korean Solar Energy Society
• /
• v.30 no.1
• /
• pp.19-24
• /
• 2010

At the altitudes above 3km, the wind is three to four time faster and less variable than at the current MW sized wind turbine hub height of around 100m. In addition, power generation from wind turbines installed on the ground is intermittent because local wind conditions are affected by local topography and artificial structures. The wind energy researchers and engineers are now looking for revolutionary ideas to utilize high altitude wind resources in-creasing the capabilities of wind turbine installations. This article presents and discusses several concepts for wind energy exploitation from wind at high altitudes. The concepts presented in this paper make use of lifting bodies, called wings or kites, connected to a tether that stetches into the higher regions of the atmosphere.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.175-184
• /
• 1996

In this paper the newly developed discrete-time adaptive sliding mode control method is proposed and applied to the power system stabilization problem. In contrast to the conventional continuous-time sliding mode controller, the proposed method is developed in the discrete-time domain and based on the input/output measurements instead of the continuous-time and the full-states feedback, respectively. Because the proposed control method has the adaptivity property in addition to the natural robustness property of the sliding mode control, it is possible to design the power system stabilizer which can overcome both the minor variations of the parameters of the power system and the diverse operating conditions and faults of the power system. Mathematical proof and the various computer simulations are done to verify the performance and stability of the proposed method.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.123-126
• /
• 1996

In this paper, optimal modulation controller is designed to improve the stability of A.C. and A.C.-D.C. power system, and optimal theory is applied to select optimal modulation controller input signal Optimal modulation controller for speed governor and exciter controller system is constructed in A.C. power system, while the controller is constructed to the both control systems like AC. power system, considering ACR-AVR, APR-$A{\gamma}R$ as the control method of direct current system. It is considered that the stability of A.C. power system only and A.C.-D.C. power system against load fluctuations and disturbances under case of optimal modulation control.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.9-11
• /
• 1994

FACTS concept is the control of power flow and increase of the loading on existing lines to the thermal limuts. This paper focuses on the ability of the thyristor controlled series compensator (TCSC) to stabilize the disturbed power systems. The result shows the potential benefit of the TCSC in addition to the role of controlling the steady state power flow. In order to show the effectiveness of controlled series capacitor, power system dynamic model is augmented and the effect of the SC into the power system dynamics is included. As a control algorithm, Linear Optimal Control theory is applied.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.401-401
• /
• 2009

Recently, demands for the development of compact, lightweight power supplies with higher power density and higher efficiency have been increased. Since Piezoelectric Transformer (PT) was emerged in device and material industry, it has been suggested as a viable alternative to the magnetic transformer in some applications. PT has some advantages such as low profile and mechanical energy transfer with little electromagnetic interface (EMI). Also, PT can provide high voltage stepping ratio with good isolation and requires no copper windings saving copper usage especially for large voltage conversion differences. Conventional control of PT converter has mainly two-way. One is the pulse frequency modulation (PFM) control method and the other is the pulse width modulation (PWM) control with frequency fixed method. It is known that the maximum PT efficiency can be obtained when it operates near the resonant frequency of the PT. And, also PT's resonant frequency moves according to the load condition. Therefore, selection of PT converter control method is very difficult. This paper analyzes general piezo-electric converter modeling and proposes a guide-line to selection of control method and stabilization control.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.95-98
• /
• 2005

This paper presents intelligent digital redesign method of global approach for hybrid state space fuzzy-model-based controllers. For effectiveness and stabilization of continuous-time uncertain nonlinear systems under discrete-time controller, Takagi-Sugeno(TS) fuzzy model is used to represent the complex system. And global approach design problems viewed as a convex optimization problem that we minimize the error of the norm bounds between nonlinearly interpolated linear operators to be matched. Also by using the power series, we analyzed nonlinear system's uncertain parts more precisely. When a sampling period is sufficiently small, the conversion of a continuous-time structured uncertain nonlinear system to an equivalent discrete -time system have proper reason. Sufficiently conditions for the global state -matching of the digitally controlled system are formulated in terms of linear matrix inequalities (LMls). Finally, we prove the effectiveness and stabilization of the proposed intelligent digital redesign method by applying the chaotic Lorentz system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.130-131
• /
• 2016

Although many metals contaminated sediment from coastal area contain both anionic and cationic heavy metals, the current remediation technologies are not effective for stabilize heavy metals of both anionic and cationic elements from contaminated coastal region. the present work investigated the efficiency and mechanism of immobilization of Fe, Zn, Cr, Cu, Pb and Cd metal solutions in modified zeolite based biostimulant ball. Biostimulant ball containing acetate, nitrate and sulphate which are enhance the activity of marine microorganisms and it can act as electron donors and electron acceptors. Modified zeolite and chelating agent is greatly enhance the metal stabilization due to increased immobility of the analysed metals. The XRD, FT-IR and SEM of modified zeolite which cheating agents containing heavy metals were investigated. The results indicated that heavy metals could be effectively immobilized in modified zeolite and chelating agents in BSB added sediment. The immobilization of heavy metals in modified zeolite and chelating agents along with BSB could be due to stabilize of heavy metal cations. Immobilization of heavy metals using BSB with modified zeolite and chelating agent has lower cost effect and enhance the sediment quality.

• 한국연소학회:학술대회논문집
• /
• 2007.05a
• /
• pp.139-144
• /
• 2007

A micro cyclone combustor was developed to be used as a component of mobile power generator (MPG). The cyclone combustor was designed so that fuel and air were supplied to the combustion chamber separately to prevent a flash-back. The flame shape stabilized inside the micro cyclone combustor was visualized experimentally and the flow field and the combustion characteristics of the combustor were investigated numerically. The global equivalence ratio (${\Phi}$), defined using the fuel and air flow rates, was introduced to examine the overall flow and flame features of the combustor. The flame stabilization mechanism could be well understood using the velocity distribution inside the combustor. For only non-reacting case, it was found that a weak recirculating zone was formed upper the fuel-supplying tube in case of ${\Phi}$ < 1.0. It was also found that small regions that have a negative axial velocity exist near the fuel injection ports for both of non-reacting and reacting case. It was identify that a flame front was stabilized at the negative axial velocity regions near the fuel injection ports.

• Journal of Power Electronics
• /
• v.8 no.4
• /
• pp.301-308
• /
• 2008

This paper proposes a method of improving the stability in sensor-less control of permanent magnet synchronous motors. The control method for low-speed region is divided into two: One is a high frequency method, which involves a problem of reverse rotation once misdetection of the permanent magnet polarity should occur, and another one is a current drive method, which has a problem that phase and speed oscillations are caused by quick speed changes. Hence, authors propose adoption of the current drive method for the basic control system with added compensation of stabilization by means of the high frequency method. This combination secures stable control with no risk of reversal and less vibration. In addition, authors have also considered a frequency separation filter of a shorter delay time so that current control performance will not lower even when high frequencies are introduced. This filter has achieved simplified compensation using repetitive characteristic through the utilization of the periodicity of high frequency current. Simulation and experiment have been conducted to verify that the stable performance of this system is improved.

• The Korean Journal of Applied Statistics
• /
• v.19 no.2
• /
• pp.283-290
• /
• 2006

Generally speaking, power transformations such as Box-Cox transformation(1964) is applied for variance stabilization and symmetry. But, when the distribution of the original data has a large mean with a small variance or the coefficient of variation is very small, they don't work at all. This paper propose a simple method to introduce a shift parameter before applying power transformations and showed the numerical evidence by Monte Carlo simulation and a real data analysis.