• 융합신호처리학회논문지
• /
• 제13권2호
• /
• pp.91-98
• /
• 2012

전압강하(sag), 전압상승(swell), 고조파(harmonics)와 충격과도(impulsive transients)와 같은 전력품질(PQ: Power Quality) 신호는 전력전자 장비와 마이크로프로세서 기반 전자장치 운전에 매우 중요한 문제점을 야기시킨다. 웨이블릿 기반 잡음제거 기법과 역전파 신경회로망을 사용하여 잡음 전력품질을 분석하고 인식하는 잡음 전력품질 인식 시스템의 유효성을 본 논문에서 조사하였다. 잡음 전력 인식 시스템에 적용된 알고리즘은 웨이블릿기반 디노이징과 역전파 신경회로망이고, 잡음 전력품질 인식 시스템의 실시간 성능을 검증하기 위하여 Simulink를 사용한 SIL(Software In the Loop)과 TMS320C6713DSK를 사용한 PIL(Processor In the Loop)을 통하여 우수한 인식률을 확인 할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1070-1072
• /
• 2001

In recent years, customers and power supplies are interested in power quality. Demands of customers are change from standard quality of distribution power system to various high quality of distribution power system. so, it is necessary to apply power quality compensator, in our project, we develop the power quality compensator of 150kVA which compensates power factor and voltage sag, interruption. it is very frequently occurred power qualify problems[1,2]. As a series and shunt compensator, power quality compensator consists of two inverters with common do link capacitor bank. It compensates the current quality in the shunt part and the voltage qualify in the series part. In this paper we present the design and control algorithm of power quality compensator. As a control algorithm is implemented by digital controller, we consider sample-and-hold of signals. In this simulation, we use EMTDC/PSCAD V3.0 software which can simulate instantaneous voltage and current.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.90-92
• /
• 2005

As the developing of industry, the nonlinear equipments as inverter, converter, SMPS(Switching Mode Power Supply) and motor have been increased. But the sensitive electronic loads to the power quality, such as computer's and other electronic equipments, have been spreaded out very fast. Thus, the power quality (PQ) problems and the real time power quality monitoring (PQM) are one of the important issues industry and building area for the intelligent control of the systems. One of them, PQM using PLC(Power Line Communication) have good merits that can send and receive the PQ information without any new network line. This paper presents the PQM hardware and software to monitor the PQ information by using PLC that meets the categories of IEEE Std. 1159.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권5호
• /
• pp.330-339
• /
• 2015

Power quality (PQ) problems are becoming a big issue, since delicate complex electronic devices are widely used. We present a new denoising technique using discrete wavelet transform (DWT), where a modified correlation thresholding is used in order to reliably detect the PQ disturbances. We consider various PQ disturbances on the basis of IEEE-1159 standard over noisy environments, including voltage swell, voltage sag, transient, harmonics, interrupt, and their combinations. These event signals are decomposed using DWT for the detection of disturbances. We then evaluate the PQ disturbance detection ratio of the proposed denoising scheme over Gaussian noise channels. Simulation results also show that the proposed scheme has an improved signal-to-noise ratio (SNR) over existing scheme.

• 전기학회논문지
• /
• 제56권8호
• /
• pp.1351-1359
• /
• 2007

In this paper, we have studied the power quality(PQ) diagnosis system with the two methods for PQ diagnosis. One to Apply a regulation value in compliance with mathematics calculation, and the other Automatic identification using Neural network algorithm. Neural network algorithm is used for an automatic diagnosis of the PQ. The regulation proposed by IEEE 1159 Working group is applied for the precision of the diagnosis. In order to divide accurate segmentation, the algorithm for a computer training used the back propagation out of several neural network algorithms. We have configured the proto-type sample by using Labview and a programmed Neural Networks Algorithm using with C. And arbitrary electric Signal generated by OMICRON Company's CMC 256-6 for an efficiency test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.50-52
• /
• 2005

Research interests in PQ(Power Quality) measurement and monitoring system have been increased. This paper describes an experimental result for monitoring system that monitors power quality and undesirable accidents when distributed generations are connected to the power grid. Prior to develop a physical monitoring system for distributed generation applications, we constitute a mesuring system for the general PQ factors. In this paper, an approach to how to measure the PQ elements is presented by using TMS320C6701 processor. Simulation results using the PSCAD and the power system simulation equipment Dobel have verified the proposed measurement system.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.109-116
• /
• 2009

This paper addresses the output control of a utility-connected double-fed induction machine (DFIM) for wind power generation systems (WPGS). DFIM has a back-to-back converter to control outputs of DFIM driven by the wind turbine for WPGS. To supply commercially the power of WPGS to the grid without any problems related to power quality, the real and reactive powers (PQ) at the stator side of DFIM are strictly controlled at the required level, which in this paper is realized with the Fuzzy PI controller based on the field orientation control. For the Sinusoidal Pulse Width Modulation (SPWM) converter connected to the rotor side of DFIG to maintain the controllability of PQ at the state side of DFIM, the DC voltage of the DC link capacitor is also controlled at a certain level with the conventional Proportion-Integral (PI) controller of the real power. In addition, the power quality at the grid connected to the rotor side of DFIM through the back-to-back converter is maintained in a certain level with a PI controller of the reactive power. The controllers for the PQ at the stator side of DFIM, the DC link voltage of the back-to-back inverter and the reactive power at the grid connected to the rotor side of DFIM are designed and simulated in the PSIM program, of which the result verifies the performance of the proposed controllers.

• 조명전기설비학회논문지
• /
• 제23권1호
• /
• pp.116-124
• /
• 2009

본 논문은 이산웨이블렛 변환, 푸리에 변환 및 실효값의 연산 결과를 이용하여 전력품질을 진단하는 인공지능형 진단기법을 제안한다. 제안된 진단기법을 채택한 인공지능형 전력품질 진단기는 과도현상, 순간전압강하, 순간전압상승, 순간정전 및 전고조파 외형률의 진단 및 분류가 가능하다. 신호처리를 위한 데이터 샘플링주파수는 15.36[kHz]가 사용되었으며 샘플링된 이산데이터는 이산웨이블렛변환, 고속푸리에변환, 실효값의 연산에 사용되어진다. 효율적인 인공지능형 전력품질 진단을 위해서, 진단하고자 하는 전력품질 요소에 맞추어 간단한 다층구조의 인공신경망을 설계하였다. 제안된 인공신경망은 C++ 언어로 프로그램되어 PSIM 시뮬레이션 연구에 사용되었으며, TI DSP 320C6713 마이크로프로세서를 사용한 MP PQ+256 하드웨어에서 검증하였다.

• 융합신호처리학회논문지
• /
• 제11권2호
• /
• pp.169-176
• /
• 2010

Sag, Swell, Impulsive Transient, Harmonics 등의 비정상 전력품질 신호들은 산업체 전력전자 장비, 속도 조절 장치, 공정 제어 시스템의 운전에 상당히 나쁜 영향을 미쳐 전력 공급자 및 수용가 입장에서 매우 중요한 이슈가 되어왔다. 따라서 본 연구에서는 이상의 전력품질 신호들을 획득, 분석 및 인식하기 위하여 Matlab, Simulink, CCS 등의 소프트웨어와 TI의 TMS320C6713DSK 하드웨어 키트와 웨이블릿 변환과 신경 회로망 역전파 알고리즘을 사용하여 전력품질 인식 시스템을 구현하였다. 이 시스템의 실시간 인식 성능을 파악하기 위하여 SIL(Software In the Loop)와 PIL(Process In The Loop)를 수행하였고, 그 결과 평균 99%의 우수한 인식결과를 보여주었다.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1601-1608
• /
• 2015

This paper presents a PQ control strategy for micro grid inverters with axial voltage regulators. The inverter works in the voltage-controlled mode and can help improve the terminal power quality. The inverter has two axial voltage regulators. The 1st regulator involves the output voltage amplitude and output impedance, while the 2nd regulator controls the output frequency. The inverter system is equivalent to a controllable voltage source with a controllable inner output impedance. The basic PQ control for micro grid inverters is easy to accomplish. The output active and reactive powers can be decoupled well by controlling the two axial voltages. The 1st axial voltage regulator controls the reactive power, while the 2nd regulator controls the active power. The paper analyses the axial voltage regulation mechanism, and evaluates the PQ decoupling effect mathematically. The effectiveness of the proposed control strategy is validated by simulation and experimental results.