• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2001년도 추계학술대회 논문집
• /
• pp.76-80
• /
• 2001

The weight of shoes may serve as a determining factor of perceived comfort and feel to the consumer in their purchase and repurchase decisions of footwear. People, however, seem to have trouble in accurately judging the feeling of weight of shoes on their feet. This paper made a psychophysical study of subjects′ sensitivity to weight on their feet and in their hands. The experiment consisted of 3 tests according to the motions people make when they evaluate the feel of shoes: 1) vertical lifting of a shoe on the foot ("hefting" in on the foot) 2) swing the shod foot back and forth; 3) holding and lifting a shoe by hand ("hefting" it in the hand). The method of constant stimuli and magnitude estimation were used for the experiment with 20 subjects. Weber′s ratios and the power law exponents obtained for each of the three tests were 0.156 and 0.713, 0.108 and 0.970, and 0.065 and 1.249, respectively in the same order of the previously listed tests.

• 대한의용생체공학회:의공학회지
• /
• 제32권3호
• /
• pp.245-250
• /
• 2011

Parallel imaging technique can provide several advantages for a multitude of MRI applications. Especially, in SENSE technique, sensitivity maps were always required in order to determine the reconstruction matrix, therefore, a number of difference approaches using sensitivity information from coils have been demonstrated to improve of image quality. Moreover, many filtering methods were proposed such as adaptive matched filter and nonlinear diffusion technique to optimize the suppression of background noise and to improve of image quality. In this study, we performed SENSE reconstruction using computer simulations to confirm the most suitable method for the feasibility of filtering effect and according to changing order of polynomial fit that were applied on variation of spatial resolution of sensitivity map. The image was obtained at 0.32T(Magfinder II, Genpia, Korea) MRI system using spin-echo pulse sequence(TR/TE = 500/20 ms, FOV = 300 mm, matrix = $128{\times}128$, thickness = 8 mm). For the simulation, obtained image was multiplied with four linear-array coil sensitivities which were formed of 2D-gaussian distribution and the image was complex white gaussian noise was added. Image processing was separated to apply two methods which were polynomial fitting and filtering according to spatial resolution of sensitivity map and each coil image was subsampled corresponding to reduction factor(r-factor) of 2 and 4. The results were compared to mean value of geomety factor(g-factor) and artifact power(AP) according to r-factor 2 and 4. Our results were represented while changing of spatial resolution of sensitivity map and r-factor, polynomial fit methods were represented the better results compared with general filtering methods. Although our result had limitation of computer simulation study instead of applying to experiment and coil geometric array such as linear, our method may be useful for determination of optimal sensitivity map in a linear coil array.

• 한국자기학회지
• /
• 제10권2호
• /
• pp.93-98
• /
• 2000

자기 광학 공간 광 변조기의 화소의 자화를 반전시키기 위하여 사용하는 드라이브 라인의 형상을 컴퓨터 시뮬레이션을 통하여 설계하고, 연자성막을 도입함으로써 화소 반전에 필요한 최소 전류와 소비 전력을 기존의 드라이브 라인에 비하여 약 3배 감소시킬 수 있었으며, 드라이브 라인을 묻지 않고, 화소를 덮는 반사막(드라이브 라인)의 면적을 크게 하여 광효율을 2.2배 증가시키고, 제조공정을 대폭 단순화시킬 수 있는 드라이브 라인의 형상을 제시했다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.31-33
• /
• 1998

The sensitivity of induction watthour meter was reviewed by characteristic tests under the effects of each input harmonics and the variation of power factor of inverter input/output terminal. This paper presents experimental data on the characteristics of induction watthour meter under the effect of harmonics.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.45-51
• /
• 2014

Distribution system is a critical link between customer and utility. The control of power loss is the main factor which decides the performance of the distribution system. There are two methods such as (i) distribution system reconfiguration and (ii) inclusion of capacitor banks, used for controlling the real power loss. Considering the improvement in voltage profile with the power loss reduction, later method produces better performance than former method. This paper presents an advanced evolutionary algorithm for capacitor inclusion for loss reduction. The conventional sensitivity analysis is used to find the optimal location for the capacitors. In order to achieve a better approximation for the current candidate solution, Opposition based Differential Evolution (ODE) is introduced. The effectiveness of the proposed technique is validated through 10, 33, 34 and85-bus radial distribution systems.

• Nuclear Engineering and Technology
• /
• 제42권4호
• /
• pp.394-413
• /
• 2010

The object of this paper is to identify the key elements that impact a radiation dose at EAB (Exclusion Area Boundary). This study is based on the AST (Alternative Source Terms) as defined in Regulatory Guide 1.183. The LOCA (Loss of Coolant Accident) and the LRA (Locked Rotor Accident) are selected as limiting cases. A sensitivity analysis of accidental behavior with respect to various parameters during LOCA and LRA at Kori Unit 1 is also undertaken for the following objectives: to determine the limiting parameters, to find the impact trend of the radiation dose, and to find the safety margin between AST and TID (Technical Information Document) methodologies. This work confirms that key parameters are particulate removal rate, decontamination factor, iodine chemical form, gap fraction, partitioning factor, and the impact of isotopes group. Comparing TID with AST, the radiation dose of TID is about 80% greater than that of AST under a LOCA, and about 60% greater than that of AST for the case of a LRA; thus the safety margin is remarkably increased when the AST is used. In this work, the sensitivity analysis results are presented in terms of a sensitivity index called the "NDD (Normalized Dose Difference)", which compares the impact of parameters with that of a reference case. These values are derived by using a combination of the leak rate (primary to secondary), iodine chemical form, gap fraction, partitioning factor, spray removal rate, source term, and other variables.

• 대한전기학회논문지
• /
• 제36권6호
• /
• pp.390-395
• /
• 1987

There is a variety not only of research topics but also of research techniques in electric power problems. It is well known that a significant increase in the rate of convergence can be obtained for the Gauss-Seidel method using the bus admittance matrix by applying acceleration factors determined empirically. The acceleration factor is calculated theoretically by using the bus voltage sensitivity (buses voltage interact each other) in this paper. It is observed that the proposed method using calculated acceleration factor gives better results than those of the method using calculated acceleration factor gives better results than those of the method using empirical one.

• 수산해양기술연구
• /
• 제15권2호
• /
• pp.55-60
• /
• 1979

본 실험장치에 관한 이상의 이론과 실험을 통해 다음과 같은 결론을 얻을 수 있다. 1. 연산기로써 전류입력파형을 부경전류의 다소에 관계없이 일정진폭의 단형파로 변화시킴으로써 부경전류 0.01[A] 이상의 역율의 정밀측정이 가능하다. 2. 영구자석가동코일형 직류전류계를 사용하여 출력파형의 평균치들 얻음으로써 역율값을 0-1의 전절원에 걸쳐 평균 눈금으로 직독할 수 있다. 3. Fig. 19에서 알 수 있듯이 진력율이나 지력율에 관계없이 측정가능하며 모두 정의 눈금으로 읽을 수 있다. 4. 출력저항에서 역률 Relay 회로를 쉽게 도입할 수 있어 전기기계의 자동제어, 보호, 경보 등의 회로를 쉽게 적용할 수 있다.

• 센서학회지
• /
• 제25권3호
• /
• pp.229-234
• /
• 2016

Self-powered neutron detector (SPND) is being widely used to monitor the reactor core of the nuclear power plants. The SPND contains a neutron-sensitive metallic emitter surrounded by a ceramic insulator. Currently, the vanadium (V) SPND has been being developed to be used in OPR1000 nuclear power plants. Some Monte Carlo simulations were accomplished to calculate the initial sensitivity of vanadium emitter material and alumina insulator with a cylindrical geometry. An MCNP code was used to simulate some factors (neutron self-shielding factor and beta escape probability from the emitter) and space charge effect of an insulator necessary to calculate the sensitivity of vanadium detector. The simulation results were compared with some theoretical and experimental values. The method presented here can be used to analyze the optimum design of the vanadium SPND and contribute to the development of TMI (Top-mount In-core Instrumentation) which might be used in the SMART and SMR.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.281-283
• /
• 2005

Processing Plasmas are very sensitive to a variation in process parameters, To maintain process quality and device field, plasma malfunction should be tightly monitored with high sensitivity. A new monitoring method is presented and this was accomplished by applying discrete wavelet transformation to X-ray photoelectron spectroscopy. XPS data were collected during a plasma etching of silicon carbide. Various effects of DWT factor on fault sensitivity were optimized experimentally. Compared to raw data, total percent sensitivity for DWT data demonstrated a significantly improved sensitivity to plasma faults induced by bias power.