• 조명전기설비학회논문지
• /
• 제23권9호
• /
• pp.55-61
• /
• 2009

본 논문에서는 구역전기사업자를 구성하는데 적용하기 위해, 기존의 최적화 기법인 Discrete Particle Swarm Optimization (DPSO) 알고리즘을 개량한 Phasor DPSO (PDPSO) 알고리즘을 새롭게 제시한다. 구역전기사업자는 전력구입 뿐만 아니라 전력판매도 가능하고, 미리 계약한 수용가의 전력부하에게 전력을 공급할 의무가 있다. 하나의 배전계통에 다수의 구역전기사업자가 존재할 경우, 해당 배전계통 내의 모든 수용가에게 최소의 운영비용으로 전력을 공급하기 위해서는 다수 구역전기사업자 간에 구성형태를 조정할 필요가 있다. 이에 적용할 최적화 기법으로 본 논문은 PDPSO 알고리즘을 제안하며, 제안된 알고리즘의 각 개체는 기존의 다변수 벡터 대신 크기와 위상각으로 이루어진 다변수 페이저 값을 갖는다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2225_2226
• /
• 2009

An increasing of non-linear loads such as power electronic equipment in distribution systems is the reason for the greater concern about harmonics in recent time. A harmonic current and voltage in distribution systems can cause many problems such as malfunction of protective equipment. In this paper, Total Harmonic Distortion(THD) of voltage according to magnitudes and measurement locations of the non-linear loads was calculated and analyzed with Electro-Magnetic Transients Program(EMTP).

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1135-1140
• /
• 2008

Superconducting fault current limiters (SFCL) have been progressing due to the development of superconducting technology. The resistor type SFCL is one of the promising current limiting devices in power system for its effective operation. For proper application and operation of a SFCL, the prior investigation of fundamental characteristics and its effects to the distribution systems are needed. The most important current limiting behavior of a SFCL is dominated by quenching and recovery characteristics. In this paper, the resistive type SFCL was developed by using EMTP/ATPDraw and MODELS language. The operating characteristics and current limiting behaviors of the SFCL in distribution systems have been simulated and investigated.

• Journal of Communications and Networks
• /
• 제16권6호
• /
• pp.600-612
• /
• 2014

In this paper, we consider the problem of spectrum sensing for advanced television systems committee (ATSC) digital television (DTV) signal detection. To exploit the cyclostationarity of the ATSC DTV signals, we employ spectral correlation density (SCD) as the decision statistic and propose an optimal detection algorithm. The major difficulty is in obtaining the probability distribution functions of the SCD. To overcome the difficulty, we probabilistically model the pilot frequency location and employ Gaussian approximation for the SCD distribution. Then, we obtain a practically implementable detection algorithm that outperforms the industry leading systems by 2-3 dB. We also propose various techniques that greatly reduce the system complexity with performance degradation by only a few tenths of decibels. Finally, we show how robust the system is to the estimation errors of the noise power spectral density level and the probability distribution of the pilot frequency location.

• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.114-119
• /
• 2006

High critical current density, high n value, multiple faults endurances, and fast recovery characteristics of YBCO thin films are very attractive characteristics for developing resistive type superconducting fault current limiters. But due to the limited current and voltage ratings of one YBCO module, it is needed to construct series and parallel module connections for high capacity electric networks. Especially for distribution network, more than 30 units should be connected in series to meet voltage level. So in order to construct distribution-level superconducting fault current limiter, simultaneous quench in one YBCO thin films should be realized, and furthermore, quench should be occurred in all fault current limiting units equally to avoid local heating and failures. In this paper, we proposed optimum design of YBCO thin films for fault current limiting module and technical method using shunt resistor to achieve simultaneous quench between multi current limiting units. From the analytical and the experimental results, optimal current path and thickness of shunt material was determined for YBCO thin films and shunt resistor between modules was developed. Finally, 14 kV one phase resistive fault current limiter using multi YBCO thin films was constructed and it was possible to get satisfactory test results.

• 산경연구논집
• /
• 제3권2호
• /
• pp.5-16
• /
• 2012

Purpose - Distribution channels cannot function without cooperation. While evidence suggests channel power plays a fundamental role in fostering successful manufacturer-dealer channel cooperation in Western countries distribution systems, little is known empirically as to how dealers' possession of non-mediated powers influence SME manufacturers' cooperation in Asian developing countries. Research design, data, methodology - Drawing upon the extant distribution channels literatures; this study conceptualizes a model and examines the effects of dealer's non-mediated powers on manufacturing SME firms, as well as the mediating influence of trust, relationship satisfaction and commitment. A survey of 400 manufacturing SMEs in Taiwan empirically supports the proposed hypothesis. Results - The model is acceptable in terms of overall goodness of fit. Acceptable model fit are indicated by χ²/(df): 2.35, GFI≧.90; RMSEA values≦ .08; IFI, TLI and CFI values≧.90. Our results indicate that, GFI (0.910), IFI (0.937), TLI (0.903), CFI (0.936), and RMSEA (0.079) and therefore, achieved the suggested thresholds. Conclusions - The results of this study have some managerial implications for managers in the dealer's firms. The overall implication from the findings is that managers can utilize expert, referent and traditional legitimate powers to attain channel cooperation with manufacturing SMEs in addition to garnering their trust, relationship satisfaction and commitment.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1489-1494
• /
• 2014

A hardware-in-the-loop simulation (HILS) method for a wind farm controller using a real time digital simulator (RTDS) is presented, and performance of the wind farm controller is analyzed. A 100 MW wind farm which includes 5 MW wind power generation systems (WPGS) is modeled and analyzed in RSCAD/RTDS. The wind farm controller is implemented by using a computer, which is connected to the RTDS through transmission control protocol/internet protocol (TCP/IP). The HILS results show the active power and power factor of the wind farm, which are controlled by the wind farm controller. The proposed HILS method in this paper can be effectively utilized to validate and test a wind farm controller under the environment in practice without a real wind farm.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.803-810
• /
• 2022

The small modular liquid-metal fast reactor (SMFR) is an important component of advanced nuclear systems. SMFRs exhibit relatively low breeding capability and constraint space for control rod installation. Consequently, control rods are deeply inserted at beginning and are withdrawn gradually to compensate for large burnup reactivity loss in a long lifetime. This paper is committed to investigating the impact of control rod compensation operation on core neutronics characteristics. This paper presents a whole core fine depletion model of long lifetime SMFR using OpenMC and the influence of depletion chains is verified. Three control rod position schemes to simulate the compensation process are compared. The results show that the fine simulation of the control rod compensation process impacts significantly the fuel burnup distribution and absorber consumption. A control rod equivalent position scheme proposed in this work is an optimal option in the trade-off between computation time and accuracy. The control position is crucial for accurate power distribution and void feedback coefficients in SMFRs. The results in this paper also show that the pin level power distribution is important due to the heterogeneous distribution in SMFRs. The fuel burnup distribution at the end of core life impacts the worth of control rods.

• Transactions on Electrical and Electronic Materials
• /
• 제18권2호
• /
• pp.111-118
• /
• 2017

The increased diversity of different types of energy sources requires moving towards smart distribution networks. This paper proposes a probabilistic DG (distributed generation) units planning model to determine technology type, capacity and location of DG units while simultaneously allocating ESS (energy storage systems) based on pre-determined capacities. This problem is studied in a wind integrated power system considering loads, prices and wind power generation uncertainties. A suitable method for DG unit planning will reduce costs and improve reliability concerns. Objective function is a cost function that minimizes DG investment and operational cost, purchased energy costs from upstream networks, the defined cost to reliability index, energy losses and the investment and degradation costs of ESS. Electrical load is a time variable and the model simulates a typical radial network successfully. The proposed model was solved using the DICOPT solver under GAMS optimization software.

• 동력기계공학회지
• /
• 제2권3호
• /
• pp.34-40
• /
• 1998

Performance characteristics of a refrigeration systems with various expansion valves and superheat changes were investigated experimentally. Experimental data have been taken utilizing three different devices; a thermostatic expansion valve, a linear type electronic expansion valve and a solenoid type electronic expansion valve. The data taken from tile three types of expansion valves were discussed with the temperature distribution of each zone in the evaporator and the superheat changes of the evaporator outlet In each zone temperature distribution fluctuated larger with the thermostatic expansion valve than with the electronic expansion valves. The optimum superheat ranged from $5^{\circ}C\;to\;15^{\circ}C$, and the superheat with the thermostatic expansion valve showed hunting phenomenon, which affected the evaporating and condensing temperature.