• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.273-277
• /
• 2003

This paper presents a structure of the Wilkinson power divider that can suppress the 9ea harmonic output. The power divider consists of ${\lambda}/4n$ open stubs, which are located at the $3{\lambda}/4$ branches and parallel connection of resistor which shunts the output ports. Experimental results show that this power divider suppresses from 1st to 9th harmonic components to less than -37dB, while maintaining the characteristics of a conventional Wilkinson power divider; featuring an equal power split, a simultaneous impedance matching at all ports and a good isolation between output ports. these results agree quite well with the simulation results.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.5
• /
• pp.575-582
• /
• 2007

In this paper, a 100 Watt high power amplifier has been implemented and performed evaluation, which is operating at UHF band ($470\;{\sim}\;806\;MHz$) for Digital TV repeater. To achieve increase of bandwidth and high power capability, 3-way power combiner and divider of Wilkinson type was adopted. In order to measure the fabricated 100 Watt power amplifier, the estimation technique function which makes equivalent mask was used. As a result of the measurement, the existence of pilot signal is confirmed and the signal transmitted at the rated output power 100 Watt is brought out the flat feature through 6 MHz bandwidth. and it resulted that its value was less than -47 dB at the edge of radiation channel and less than -110 dB at more than 6 MHz position from channel edge.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.59-64
• /
• 2016

In this paper, a 10W GaN MMIC was designed and fabricated using the Ku-band SSPA module. For Design and fabrication of the SSPA module using Rogers(RO4003C) substrate was used for Branch-line structure. SSPA modules on budget Divider/Combiner was designed and fabricated less than the maximum insertion loss - 0.7dB. In addition, because it must be applied to the structural nature of GaN MMIC Gate Bias-Drain Bias circuit was implemented to apply the Gate-Drain sequential circuit, implemented the RF Power Detect, Temperature Detect, HPA On/Off function. Design and fabrication Ku-band SSPA Module got the measurement results that satisfy a maximum output of 15.6W, Gain 45.7dB, 19.0% efficiency.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.134-137
• /
• 2006

The equipment of PV system is composed of PV Modules, inverters, DC combiner boxes, transformer protective equipment etc,. And, These equipment be combined Power transformation, Monitoring, Protect ive function The primary concern in designing any PV system is the determination of its optimum size and combination.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.96-97
• /
• 2003

We developed a wavelength selectable 8-channel WDM otpical transmitter. The module consisted of two 4-channel DFB-LD arrays monolithically integrated with a 1x4 Power combiner and an SOA. It operated at 1550 nm and 200 GHz spacing.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.12
• /
• pp.9-15
• /
• 1994

In this paper, the linearized power amplifier using digital adaptive predistorter is implemented in order to restrict spectral spreading and adjacent channel interference. The linearized systems is composed of a DSP56001 processor that executes predistortion in baseband. 90.deg. phase shifter, power splitter/combiner, quadrature modulator/demodulator of 360MHz band, and nonlinear amplifier. A ${\pi}$/4-shift QPSK is used to modulate digital random signals. As the quantized power of baseband signal and the output of amplifier are fed to the predistorter, and predistorting values are calculated using an adaptive algorithm. In the experiment, a peak to sidelobe ratio of the linearized amplifier is improved up to 15dB in comparison with conventional nonlinear amplifier, which means that the distortion of transmitted signal is decreased and adjacent channel interference was reduced.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1828-1830
• /
• 1998

In this paper, an analysis of microstrip-slotline transiton is performed using a 3D vector Finite Element Method(FEM). On the base of the analysis, power divider/combiner is designed. The optimal structure for equal power division in Ka band is also proposed.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.1
• /
• pp.39-46
• /
• 2006

PLL is a key item of power converter for power quality compensation and power flow control. This paper proposes a novel 3-phase PLL that is composed of ALC and PI controller. The operational principle was investigated through theoretical approach, and the performance was verified through computer simulations with MATLAB and experimental works with TMS320VC33 DSP board. The proposed 3-phase PLL shows accurate performance under the voltage disturbances such as sag, harmonics. phase-angle jump, and frequency change.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.214-217
• /
• 2001

This paper presents an implementation methodology of common Rf- integrated PCS base station system which, is capable of providing PCS services for 3 PCS carriers concurrently and wireless system performance evaluation data is shown. We have built up a common PCS base station system using a commonization module, which is consisted of a multi-channel combiner, duplexer, LNA, power divider, feeder line, and a common set of antennas. It was shown that the performance of the system within the total 30MHz PCS frequency range is uniformly acceptable and measured signal quality and coverage are equivalent to that of the individual PCS base station. It is expected that PCS carriers are able to save a huge amount of installation and maintenance expenses by installing and sharing this base station system. This paper forms a groundwork for deploying efficient and economical IMT-2000 network.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.35-43
• /
• 2022

In this paper, a study was conducted to produce 20W by combining a 10W MMIC and raising the unit power amplifier to 100W SSPA by combining the 8-way spatial coupler. SSPA requires low-loss, high-efficiency coupling techniques to meet high output with the output of a single element relatively low compared to TWTA. Designed and produced in this paper, the SSPA was manufactured as a 100W SSPA by mounting eight 20W high-power amplification modules in an 8-way spatial coupler with a reflection loss of 20dB or more and an excellent coupling efficiency of 94% or more. When -10dBm was applied, it was 112.2~169.8W at 20kHz 20%, 125.9~173.8W at 400kHz 40%, 117.5~162.2W at 800kHz 40%, showing performance of over 60dB and over 100W in all three PRF conditions.