• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.171-173
• /
• 2019

In this paper, 10kV solid-state pulsed power modulator with high repetition rate is described. The modulator is based on a Marx generator that charges capacitors in parallel and discharges them in series. Twelve IGBTs and capacitors are connected in series to generate output voltages up to 10kV at a repetition rate of 100kHz. The volume of the modulator is 26.1 liters, and its maximum average output power is 10kW. Therefore, the compact design is achieved with a high power density of 380 W/L. Finally, it is confirmed that the pulsed power modulator can operate stably through the experiment results at 10kV 100kHz condition.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.116-128
• /
• 2018

Conventionally, in order to reduce the ac components of the dc-link capacitors of the two-level Half-Bridge Voltage Source Inverter (HB-VSI), high dc-link capacitances are required. This necessitates the employment of short-lifetime and bulky electrolytic capacitors. In this paper, an analysis for the performance of low dc-link capacitances-based HB-VSI is presented to elucidate its ability to generate an enhanced fundamental output voltage magnitude without increasing the voltage rating of the involved switches. This feature is constrained by the load displacement factor. The introduced enhancement is due to the ac components of the capacitors' voltages. The presented approach can be employed for multi-phase systems through using multi single-phase HB-VSI(s). Mathematical analysis of the proposed approach is presented in this paper. To ensure a successful operation of the proposed approach, a closed loop current controller is examined. An expression for the critical dc-link capacitance, which is the lowest dc-link capacitance that can be employed for unipolar capacitors' voltages, is derived. Finally, simulation and experimental results are presented to validate the proposed claims.

• 한국인터넷방송통신학회논문지
• /
• 제23권4호
• /
• pp.59-64
• /
• 2023

본 논문은 전자기기에 사용되는 전원의 노이즈 저감을 위한 전도성(Conducted) EMI 필터의 경험적 설계를 통하여 제안하였다. 제안된 구조는 A형, B형, C형, D형의 구조를 설계하였으며, 다양한 X-커패스터와, Y-커패스터, Air-인덕터로 LC 네트워크 사용으로 전도성 노이즈 저감을 확인하였다. L1, L2는 10[μH]를 사용하였으며, C1, C2는 4.7[nF]를 사용하였다. 공통모드(Common Mode)용 L3는 13[μH]를 사용하였으며, C5, C6, C7은 10[nF]을 사용하여 설계하였다. 설계된 EMI 필터의 측정된 삽입손실 값은 3.2MHz에서 -74.4[dB], 4MHz에서 -75.4[dB], 13.56MHz에서 -75.3[dB]로 나타났다. 따라서 제안한 EMI 필터는 다양한 전자기기에 사용되는 전원 노이즈 저감에 이용될 것이다.

• 전기학회논문지P
• /
• 제60권2호
• /
• pp.94-98
• /
• 2011

Electrolytic power capacitors today form essential components for virtually any power electronic system such as DC/DC converter or UPS. Frequently, electrolytic capacitors for DC link voltage smoothing are the key components which determine the life cycle of the whole unit and often are responsible for converter breakdown failures. In this paper, ethernet-based remote diagnosis system for DC voltage smoothing capacitor using DSP control board is developed. To estimate the status of the capacitor, the equivalent series resistor(ESR) of the component has to be determined. The ESR detection scheme is based on the determination of the capacitor ripple power losses calculated from DC link voltage/current measurement. Experimental results show the veridity and reliability of the proposed ethernet-based remote on-line capacitor diagnosis system.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.483-489
• /
• 2009

Electrolytic capacitors are used in variety of equipments as smoothening element of the power converters because it has high capacitance for its size and low price. Electrolytic capacitors, which is most of the time affected by aging effect, plays a very important role for the power electronics system quality and reliability. Therefore it is important to estimate the parameter of an electrolytic capacitor to predict the failure. This objective of this paper is to propose a new method to detect the rise of equivalent series resistor(ESR) in order to realize the online failure prediction of electrolytic capacitor for DC output filter of power converter. The ESR of electrolytic capacitor estimated from RMS result of filtered waveform(BPF) of the ripple capacitor voltage/current. Therefore, the preposed online failure prediction method has the merits of easy ESR computation and circuit simplicity. Simulation and experimental results are shown to verify the performance of the proposed on-line method.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1544-1550
• /
• 2009

In this paper, a new single phase voltage sag/swell compensator using direct power conversion is proposed. A new compensator consists of input/output filter, series transformer and direct ac-ac converter, which is a single-phase back-to-back PWM converter without dc-link capacitors. Advantages of the proposed compensator include: simple power circuit by eliminating dc link electrolytic capacitors and thereby, improved reliability and increased life time of the entire compensator; simple PWM strategy or compensating voltage sag/swell at the same time and reduced switching losses in the ac-ac converter. Further, the proposed scheme is able to adopt simple switch commutation method without requiring complex four-step commutation method that is commonly employed in the direct power conversion. Simulation and experimental results are shown to demonstrate the advantages of the new compensator and PWM strategy. A 220V, 3kVA single-phase compensator based on the digital signal processor controller is built and tested.

• Transactions on Electrical and Electronic Materials
• /
• 제18권6호
• /
• pp.345-349
• /
• 2017

Reconfiguration is an important method to minimize power loss and load interruption by creating an optimal configuration of a system. Furthermore, by increasing demand and value of consumption, construction of new power plants can be postponed in networks by reconfiguration and proper arrangement of linkage switches. This method is feasible for radial networks, which create meshes of linkage switches. One convenient way to achieve a system with minimal power loss and interruption is to utilize capacitors. Optimal placement and sizing of capacitors in such applications is an important issue in the literature. In this paper, cat swarm optimization is introduced as a new metaheuristic algorithm to achieve this purpose. Simulation has been carried out in two feasible networks, 69-bus and 33-bus systems.

• 전기학회논문지P
• /
• 제57권4호
• /
• pp.370-376
• /
• 2008

Power capacitors is widely used for power factor correction and component of passive filter in the user power systems. Recently, application of non-linear load is gradually increased. Non-linear load produces harmonic components of current. There are series resonance and parallel resonance when capacitors are applied in the user electrical application. If this harmonic component matches resonance, voltage and current is magnified and has severely an influences on capacitor. This paper purposes a new method for the magnitude of voltage and current by the frequency scan analysis without equivalent circuit for the actual circuit at the resonance condition.

• 전력전자학회논문지
• /
• 제26권2호
• /
• pp.120-126
• /
• 2021

DC-link capacitors are one of the main components in two-level three-phase voltage source inverters (VSIs); they provide the pulsating input current and stabilize the vacillating DC-link voltage. Ideally, the larger the capacitance of DC-link capacitors, the better the DC-link voltage stabilizes. However, high capacitance increases the cost and decreases the power density of VSI systems. Therefore, the capacitance should be chosen carefully on the basis of the DC-link voltage ripple requirement. However, the DC-link voltage ripple is dependent on the pulse-width modulation (PWM) strategy. This study especially presents a DC-link voltage ripple analysis when the minimum loss discontinuous PWM strategy is applied. Furthermore, an equation for the selection of the minimum capacitance of DC-link capacitors is proposed. Experimental results with R-L loads are also provided to verify the effectiveness of the presented analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.267-269
• /
• 2006

In this paper, a new single phase voltage sag/swell compensator using direct power conversion is introduced. A new compensator consists of input/output filter, series transformer and direct ac-ac converter, which is a single-phase back-to-back PWM converter without dc-link capacitors. Advantages of the proposed compensator include: simple power circuit by eliminating dc-link electrolytic capacitors and thereby, improved reliability and increased life time of the entire compensator; simple PWM strategy to compensate voltage sag/swell at the same time and reduced switching losses in the ac-ac converter. Further, the proposed scheme is able to adopt simple switch commutation method without requiring complex four-step commutation method commonly required in the direct power conversion. Simulation results are shown to demonstrate the advantages of the new compensator and PWM strategy.