• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.645-653
• /
• 2013

Seoul National University flap(SNUF) blade is a small-scale rotor blade incorporating a small trailing-edge flap control surface driven by piezoelectric actuators at higher harmonics for vibration attenuation. Initially, the blade was designed using two-dimensional cross-section analysis and geometrically exact one-dimensional beam analysis, and its material configuration was finalized. A flap-deflection angle of ${\pm}4^{\circ}$ was established as the criterion for enhanced vibration reduction based on an earlier simulation. The flap-linkage mechanism was designed and static bench tests were conducted for verifying the performance of the flap-actuation mechanism. Different versions of test beds were developed and tested with the designed flap and the selected APA 200M piezoelectric actuators. Through significant improvements, a maximum deflection of ${\pm}3.7^{\circ}$ was achieved. High-frequency experiments were conducted for evaluating the performance, and the transfer function of the test bed was determined experimentally. With the static tests almost complete, the rotor power required for testing the blade in a whirl tower (centrifugal environment) was calculated, and further preparations are underway.

• Journal of Internet Computing and Services
• /
• v.15 no.2
• /
• pp.19-31
• /
• 2014

In this paper, a parallel backoff delay procedure on multiple IEEE 802.15.4 channels and a channel searching method considering the frequency spectrum of WiFi traffic are studied for IEEE 802.15.4 nodes to avoid the interference from WiFi traffic. In order to search the channels being occupied by WiFi traffic, we analyzed the methods measuring the powers of adjacent channels simultaneously, checking the duration of measured power levels greater than a threshold, and finding the same periodicity of sampled RSSI data as the beacon frame by signal processing. In an wireless channel overlapped with IEEE 802.11 network, the operation of CSMA-CA algorithm for IEEE 802.15.4 nodes is explained. A method to execute a parallel backoff procedure on multiples IEEE 802.15.4 channels by an IEEE 802.15.4 device is proposed with the description of its algorithm. When we analyze the data measured by the experimental system implemented with the proposed method, it is observed that medium access delay times increase at the same time in the associated IEEE 802.15.4 channels that are adjacent each other during the generation of WiFi traffic. A channel evaluation function to decide the interference from other traffic on an IEEE 802.15.4 channel is defined. A channel searching method considering the channel evaluations on the adjacent channels together is proposed in order to search the IEEE 802.15.4 channels interfered by WiFi, and the experimental results show that it correctly finds the channels interfered by WiFi traffic.

• Korean Journal of Food Science and Technology
• /
• v.49 no.4
• /
• pp.349-354
• /
• 2017

The geographical origins of raw ginseng (RG) were discriminated using an electronic tongue. Taste screening, DFA (discriminant function analysis), and CDA (canonical discriminant analysis) were used to statistically analyze the data. The taste profile patterns of umami, bitterness, and sweetness of the Korean RG was different from those of the Chinese RG. The Korean RG was stronger than the Chinese RG regarding the taste of umami. DFA discriminated the geographical origins of 154 samples, with a few overlapping samples, between the Korean and Chinese RG. CDA showed that the accuracy of origin discrimination for the Korean and Chinese RGs were 87.01 and 94.81%, respectively. The final accuracy of origin discrimination was 90.91%. The distance between the centroids of each group was 2.7463. Thus, the electronic tongue analysis can be used to efficiently differentiate the geographical origins of RG.

• Journal of Biomedical Engineering Research
• /
• v.24 no.4
• /
• pp.293-299
• /
• 2003

In this paper, the correlation of Pressure drop about the Newtonian and non-Newtonian fluid was investigated experimentally for vibrating intravascular lung assist device (VIVLAD) and we determined correlation equation to make a prediction about Pressure drop for designing VIVLAD. Design conditions to predict the pressure drop of the modules were studied through an experimental modeling before inserting the artificial lung assist device into as venous. Experiments were performed by distilled water, glycerol/water mixed solution(40% glycerol) of Newtonian fluids. and the bovine blood of non-Newtonian fluids. These fluids were flowed outside and parallel of hollow fiber membranes. Also we measured pressure drop according to the number of the fiber membranes which ware inserted into the inside diameter of shell of 3 cm, and developed the prediction equations by curve fitting method based on correlation between the experimental pressure drop and the frontal area or the packing density of device. The result showed that the Pressure drop and the friction factor of the water/glycerol mixed solution were similar to that of bovine blood. It was showed that the water/glycerol mixed solution (40% glycerol) could be used for measuring the pressure drop and the friction factor instead of the bovine blood. Also, we could estimate the prediction equation of pressure drop and friction factor as the function of Packing density at the number of hollow fibers. We obtained the reliance of the prediction equations because the pressure drop and the friction factor measured from the experiments were similar to that from the prediction equation. These results may be used to further usefulness for the design of VIVLAD.

• Journal of the Korean Institute of Gas
• /
• v.7 no.4 s.21
• /
• pp.44-52
• /
• 2003

In this work dynamic heat transfer in a CPFS (cable penetration fire stop) system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealant. Dynamic heat transfer in the fire stop system is formulated in a parabolic PDE (partial differential equation) subjected to a set of initial and boundary conditions. First, the PDE model is divided into two parts; one corresponding to heat transfer in the axial direction and the other corresponding to heat transfer on the vertical planes. The first PDE is converted to a series of ODEs (ordinary differential equations) at finite discrete axial points for applying the numerical method of SOR (successive over-relaxation) to the problem. The ODEs are solved by using an ODE solver In such manner, the axial heat flux can be calculated at least at the finite discrete points. After that, all the planes are separated into finite elements, where the time and spatial functions are assumed to be of orthogonal collocation state at each element. The initial condition of each finite element can be obtained from the above solution. The heat fluxes on the vertical planes are calculated by the Galerkin FEM (finite element method). The CPFS system was modeled, simulated, and analyzed here. The simulation results were illustrated in three-dimensional graphics. Through simulation, it was shown clearly that the temperature distribution was influenced very much by the number, position, and temperature of the cable stream, and that dynamic heat transfer through the cable stream was one of the most dominant factors, and that the feature of heat conduction could be understood as an unsteady-state process.

• Journal of Korea Port Economic Association
• /
• v.32 no.1
• /
• pp.79-95
• /
• 2016

This study identifies themes and trends in maritime economics and logistics by examining 303 papers published in international journals from 2000 to 2014 using keyword network analysis. Network analysis can be used because the collected data follow Zipf's law and the power law. Utilizing the degree centrality and betweenness centrality, we find the important keywords in each five year period and determine the importance of shared keywords. To further explain keyword centralities, we invented a Delta-C algorithm to show the trends of keywords over time. We found that degree centrality is useful for identifying important research themes in each period because it is mainly concerned with the number of connections. On the other hands, betweenness centrality is useful to determine the unique themes that emerge in each of the specific periods.

• Journal of Service Research and Studies
• /
• v.6 no.3
• /
• pp.41-54
• /
• 2016

We examine the information transmission between the business survey index(BSI) based on the returns data offered by Federation of Korean Industries and KOSPI Index based on the returns data offered by Korea Bank. The data includes monthly return data from January 1998 to September 2015. The results of the analysis are as follows. Firstly, results of Granger Causality test suggests the existence of mutual causality KOSPI Index precede and have explanatory power BSI. Secondly, the results of impulse response function suggest that BSI Index show immediate response to KOSPI Index and are influenced by till time 4 From time 2 the impact gradually disappears. Also KOSPI Index show immediate response to BSI and are influenced by till time 4 From time 2 the impact gradually disappears. Lastly, the variance decomposition analysis showed a high influence of the KOSPI Index on the BSI and significant influence of the BSI on the KOSPI Index. This implies that returns on the KOSPI Index have a significant influence over returns on the BSI. The study is a further extension of existing studies on information transmission mechanism between the BSI and KOSPI. Finally, our results can be used as a guide by the Korea Bank and Republic of Korea and as well as Federation of Korean Industries.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.823-827
• /
• 2010

This study was conducted to assess the propriety of models for soil water characteristics estimation in anthropogenic soil through the measurement of soil water content and soil water matric potential. Soil profile was characterized with four different soil layers. Soil texture was loamy sand for the first soil layer (from soil surface to 30 cm soil depth), sand for the second (30~70 cm soil depth) and the third soil layers (70~120 cm soil depth), and sandy loam for the fourth soil layer (120 cm < soil depth). Soil water retention curve (SWRC), the relation between soil water content and soil water matric potential, took a similar trend between different layers except the layer of below 120 cm soil depth. The estimation of SWRC and air entry value was better in van Genuchten model by analytical method than in Brooks-Corey model with power function. Therefore, it could be concluded that van Genuchten model is more desirable than Brook-Corey model for estimating soil water characteristics of anthropogenic soil accumulated with saprolite.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.1
• /
• pp.58-64
• /
• 2009

The objectives of this study were to investigate the aggregate fragmentation in wet-sieving and to evaluate the relationship between the aggregate fragmentation fractal dimension and macro-porosity of upland soils, using three different textural types of soils including Gopyeng series (Fine, Typic Hapludalfs), Gyuam series (Fine silty over coarse silty, Fluvaquentic Eutrudepts), and Jungdong series (Coarse loamy, Typic Udifluvents) located in Gyeonggi province. Undisturbed soil samples with five replicates were seasonally sampled and used for measuring water stable aggregate, macropores, and physico-chemical properties of soils. The aggregate stability in wet-sieving was digitalized as three types of fragmentation fractal dimension ($D_f$), geometric mean diameter (GMD), and mean weight diameter (MWD). $D_f$ had higher correlation with GMD than with MWD. Seasonal aggregate stability showed the highest values in summer, and decreased in the order of spring and autumn. The macroporosity had higher in topsoil, in autumn, and in ridge, than in plow pan layer, in summer, and in row, respectively. The relationship between $D_f$ and macroporosity, especially more than 99 m, showed high correlation only in soils with $D_f$ less than 3.1, which means more aggregated soils compared to soils with $D_f$ more than 3.1. Besides, in the soils with the fractal dimension less than 3.1, the power function relation between saturated hydraulic conductivity and macroporosity more than 99 m had relatively high determinant coefficient, and vice versa. Therefore, it could be thought that fragmentation fractal dimension is available for confirming macroporosity induced from aggregation.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.577-589
• /
• 2021

Soil seed bank community contributes to the long-term conservation of plant diversity and vegetation dynamics, and their decreasing diversity and density with soil depth provide critical perspectives (deterministic and stochastic) for understanding the community disassembly process. We analyzed changes in species composition and diversity and structuring patterns by soil layer (top and bottom), including surface vegetation, in Gwangneung Forest, a mature forest with a vegetation climate in the temperate central part of the Korean Peninsula. From two layers of soil collected with a vertical difference of 10 cm, 934 specimens of 27 families, 40 genera, 44 species, three varieties, and 47 taxa, germinated. Although species diversity and germination density decreased in most comparative characteristics, including growth type, there was no statistical significance due to large deviations. Within-group variability of species composition was similar in the upper and lower soils, as was the decline pattern in co-occurred species (ζ-diversity) and change in species retention probability. The structuring process of the community composition in the two soil layers was fitted with an exponential correlation rather than a power function, demonstrating the dominance of the stochastic process. The pattern in diversity and species turnover according to soil depth in Gwangneung Forest was discovered to be structured by stochastic random events, such as seed vertical movement rather than interaction with trait characteristics.