• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.3
• /
• pp.238-243
• /
• 2002

The dielectric properties and synthesis of $LaAIO_3$ ceramics from mixtures of $La_2O_3$ and $AI(OH)_3$ via ground(planetary ball mill) and unground(wet ball mill) were investigated. The single phase $LaAIO_3$ of ground powder was formed at $1000^{\circ}C$, while that of unground powder was formed at $1300^{\circ}C$. Density and grains of ground sample showed 98% of theory density and a uniform size of 0.75\mu\textrm{m}$, respectively, However those of unground sample showed 93% and non-uniform sizes of 4-5 $\mu\textrm{m}$. Dielectric constant and temperature coefficient of capacitance ($\tau$c) of both ground and unground samples were 21~22 and +70~74 ppm$/^{\circ}C$, respectively. Dielectric loss of ground sample(0.0004) was 10 times as low as that of unground sample(0.003) due to a uniform and small gram size.

• The Korean Journal of Community Living Science
• /
• v.27 no.3
• /
• pp.509-520
• /
• 2016

This study was carried out to investigate the effects of adding rosemary extract powder (REP) to pork teokgalbi on its quality and storage characteristics. Five types of teokgalbi were tested, viz. with no REP added (normal, N), with 0.05% ascorbic acid added (control, C) and with 0.05% (R1), 0.1% (R2) and 0.2% (R3) of REP added. The proximate composition, calorific value, water holding capacity and cooking loss were not significantly different among the different types of pork teokgalbi. The L and a values of the teokgalbi containing REP were significantly lower than those of the N and C groups. As regards the textural characteristics, the addition of 0.2% REP increased the springiness value. In the sensory evaluation, the teokgalbi with the addition of 0.1% REP had higher scores in flavor and total acceptability. The 2-thiobarbituric acid (TBA) value, total microbial count and volatile basic nitrogen content of the teokgalbi containing 0.2% REP were lower than those of the N group. In conclusion, R3 was significantly more effective in delaying lipid peroxidation than the other treatment groups. Therefore, rosemary extract could be used as a natural antioxidant in meat products.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2008

There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle, pollution due to producing a lot of toxic gases like chlorine and fluoride gas, irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals, loss of metals, and decreasing the life of refractory materials. In order to solve these problems, this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the existing methods and prevented environmental pollution with smokeless, odorless, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The method developed in this study decreases the molten metal processing and settling time compared to the existing methods and improves the workers' health, safety, and environment because there is no pollution in processes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.3
• /
• pp.277-284
• /
• 2016

In this study, we investigated the quality characteristics of madeleine combined with lyophilized red snow crab Chionoecetes japonicus leg-meat powder (CM). The madeleine was prepared by the addition of wheat flour containing 0, 1, 5, 10, 15 and 20% concentrations of CM. Moisture content, pH, and baking loss rate did not differ significantly among groups. Light coloration significantly decreased in a dose-dependent manner, while red and yellow coloration significantly increased. Hardness, chewiness and gumminess significantly increased in a dose-dependent manner, while cohesiveness, springiness and adhesiveness did not differ from CON (madeleine containing 0% CM). In terms of sensory characteristics, appearance and color did not differ compared to CON, while taste, flavor and overall preference increased in a dose-dependent manner, with CM10 having the highest score among the groups. The present study assesses the potential of this improved formula as a convenience food.

• Journal of Powder Materials
• /
• v.21 no.6
• /
• pp.429-433
• /
• 2014

This study investigated the magnetic properties and frequency dispersion of complex permeability of Ni-Zn-Co ferrites used for magnetic shielding in near field communication (NFC) system. The sintered specimens of $(Ni_{0.7}Zn_{0.3})_{1-x}Co_xFe_2O_4$ composition were prepared by the conventional ceramic processing. The coercive force and saturation magnetization were measured by vibrating sample magnetometer. The complex permeability was measured by RF impedance analyzer in the range of 1 MHz~1.8 GHz. The coercive force increased and saturation magnetization decreased with increasing the Co substitution. The real and imaginary parts of complex permeability decreased and the resonance frequency increased with Co substitution, which was attributed to the increase in crystal anisotropy field and reduction in saturation magnetization. The effect of Co substitution could be found in reducing the magnetic loss to nearly zero at the operating frequency of NFC (13.56 MHz).

• Journal of Powder Materials
• /
• v.22 no.6
• /
• pp.432-437
• /
• 2015

The en-riched $^{58}Ni$ powders are dissolved in acid solution and coated on a Cu target for proton irradiation at cyclotron to produce $^{57}Co$ radioisotope. The condition of the plating bath and the coating process are determined using the en-riched powders. To establish the coating conditions for $^{57}Co$, non-radioactive Co ions are dissolved in an acid solution and electroplated on to a rhodium plate. The thermal diffusion of electroplated Co into a rhodium matrix was studied to apply a $^{57}Co$ Mssbauer source. The diffusion depth from surface to matrix of Co is depended on the annealing temperature and time. The deposited Co atoms diffuse completely into a rhodium (Rh) matrix without substantial loss at an annealing temperature of 1200 for 4 hours.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.3
• /
• pp.53-59
• /
• 2012

Adiabatic demagnetization refrigerator (ADR) for hydrogen re-liquefaction operating between 24 K and 20 K has been designed. $Dy_{0.9}Gd_{0.1}Ni_2$, whose Curie temperature is 24 K, is selected as a magnetic refrigerant. The magnetic refrigerant powder is sintered with oxygen-free high purity copper (OFHC) powder to enhance its effective thermal conductivity as well as to achieve relatively high frequency. A perforated plate heat exchanger (PPHE) operated with forced convection is utilized as a heat switch. The forced convection heat switch is expected to have fast response relative to a conventional gas-gap heat switch. A conduction-cooled high Tc superconducting (HTS) magnet is employed to apply external magnetic field variation on a magnetic refrigerant. $2^{nd}$ generation GdBCO coated conductor HTS tape with Kapton$^{(R)}$ insulation (SUNAM Inc.) will be utilized for the HTS magnet. The magnetization and demagnetization processes are to be achieved by the AC operation of the HTS magnet. The designed magnetic field and target ramp rate of the HTS magnet are over 4 T with 180 A and 0.4 T/s, respectively. AC loss distribution on HTS magnet is theoretically estimated.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.1
• /
• pp.15-22
• /
• 2008

The effects of fillers on the mechanical and thermal properties of glass/novolac composites have been studied. The matrix polymer and reinforcement were novolac type phenolic resin and milled glass fiber, respectively. Three different fillers, such as calcium carbonate, aluminum oxide, and wood powder were used for glass fiber reinforced plastic(GFRP) manufacture. Gravity, moisture content, tensile and flexural strength were measured to analyze the mechanical properties of GFRP and the final composites was burned in the electronic furnace at $1000^{\circ}C$ to confirm thermal properties GFRP containing aluminium oxide shows the highest thermal stability with 32% of weight loss at $1000^{\circ}C$ for one hour. GFRP containing calcium carbonate shows the maximum flexural strength (146 MPa), but that containing wood powder dose the highest tensile strength (65 MPa). Conclusively, we found that the characteristics of final composites strongly depend on several factors, such as types of materials, contents and chemical affinity of fillers. Therefore, it is very important to set up the combination of fillers for GFRP manufacturing to improve both mechanical and thermal properties at the same time.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.92-97
• /
• 1993

Sol-Gel Process is a new method of synthesis of high-quality of glass and glass-ceramics. Ferroeletric material, $BaTiO_3$ powder was made by reacting $Ba(OH)_2$ and $Ti[OCH(CH_3)_2]_4$ in alcohol. There was about 16.5% weight loss in thermogravimetric analysis. It was crystallized to tetragonal structure by heat treatment at $700^{\circ}C$ for 2 hours and had a specific surface area, 16.0 $m^2/g.$ Shrinkage curve by sintering was began around $1100^{\circ}C$ in dilatometer analysis.

• Journal of the Korean Ceramic Society
• /
• v.46 no.5
• /
• pp.488-492
• /
• 2009

Porous frit-bonded SiC ceramics were successfully prepared at a temperature as low as $800^{\circ}C$ from SiC, frit, and microbeads (glass or polymer). The effects of SiC starting particle size and microbead addition on microstructure, porosity, and flexural strength were investigated. The addition of hollow glass microbead improved the strength of frit-bonded SiC ceramics without the loss of porosity by acting additional binder phase between SiC grains. The 65 ${\mu}m$-sized SiC resulted in lower porosity and higher strength than 50 ${\mu}m$-sized SiC because of higher packing density. Typical flexural strengths of frit-bonded SiC were 23 MPa at 46% porosity and 19 MPa at 49% porosity.