• Resources Recycling
• /
• v.1 no.1
• /
• pp.58-68
• /
• 1992

A process development for direct synthesis of high pure ZnO powders from zinc-bearing waste was investigated. This waste contains a 55% of zinc and it was extracted by the sulfuric acid(leaching). After removal of iron ion by precipitation from the zinc solution, the purification through a solvent extraction by the use of D2EHPA as an extractant was carried out. Then, loaded zinc in organic solution was stripped and precipitated simultaneously using a precipitant such as oxalic acid. Then, loaded zinc in organic solution was stripped and precipitated simulataneously using a precipitant such as oxalic acid. The synthesized $ZnC_2O_4$ powders by the precipitation stripping method was calcined to obtain more than 99.9% of ZnO powders. The effect of sulfuric acid concentration, leaching time, pulp density on the extraction of zinc was studied and the optimum conditions for the solvent extraction were obtained through the investigation of purification of zinc solution. The size, morphology and size distribution of synthesized $ZnC_2O_4$ powders were studied in terms of oxalic acid concentration, temperature, surfactant added, precipitation time, etc.

• The Korean Journal of Mycology
• /
• v.38 no.1
• /
• pp.57-61
• /
• 2010

For development of anti-obesity nutraceuticals from mushrooms, new anti-obesity lipase inhibitor from Phellinus linteus was purified by systematic solvent extraction, TLC and HPLC and characterized. Methanol extract from P. linteus most effectively inhibited(72.5%) porcine pancreatic lipase and ethyl acetate fraction showed the highest inhibitory activity in the systematic solvent extraction. A lipase inhibitor from the ethyl acetate fraction was purified through following steps including 3 times silica gel chromatography and preparative HPLC. The purified lipase inhibitor was a yellowish geen powder and its $IC_{50}$ value was 175 ng. Its molecular weight by MALDI-TOF-MS was 523.06 Da and showed maximal absorption spectrum at 225.1 nm.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.20-32
• /
• 2022

This study implemented a chelating agent (Ethylenediaminetetraacetic acid, EDTA) in purification to obtain high-purity vanadium pentoxide (V₂O₅) for use in VRFB (Vanadium Redox Flow Battery). V₂O₅ (powder) was produced through the precipitation recovery of ammonium metavanadate (NH₄VO₃) from a vanadium solution, which was prepared using a low-purity vanadium raw material. The initial purity of the powder was estimated to be 99.7%. However, the use of a chelating agent improved its purity up to 99.9% or higher. It was conjectured that the added chelating agent reacted with the impurity ions to form a complex, stabilizing them. This improved the selectivity for vanadium in the recovery process. However, the prepared V₂O₅ powder exhibited higher contents of K, Mn, Fe, Na, and Al than those in the standard counterparts, thus necessitating additional research on its impurity separation. Furthermore, the vanadium electrolyte was prepared using the high-purity V₂O₅ powder in a newly developed direct electrolytic process. Its analytical properties were compared with those of commercial electrolytes. Owing to the high concentration of the K, Ca, Na, Al, Mg, and Si impurities in the produced vanadium electrolyte, the purity was analyzed to be 99.97%, lower than those (99.98%) of its commercial counterparts. Thus, further research on optimizing the high-purity V₂O₅ powder and electrolyte manufacturing processes may yield a process capable of commercialization.

• Journal of Powder Materials
• /
• v.22 no.2
• /
• pp.122-128
• /
• 2015

In this study, titanium(Ti) meshes and porous bodies are employed to synthesize carbon nanotubes(CNTs) using methane($CH_4$) gas and camphene solution, respectively, by chemical vapor deposition. Camphene is impregnated into Ti porous bodies prior to heating in a furnace. Various microscopic and spectroscopic techniques are utilized to analyze CNTs. It is found that CNTs are more densely and homogeneously populated on the camphene impregnated Ti-porous bodies as compared to CNTs synthesized with methane on Ti-porous bodies. It is elucidated that, when synthesized with methane, few CNTs are formed inside of Ti porous bodies due to methane supply limited by internal structures of Ti porous bodies. Ti-meshes and porous bodies are found to be multi-walled with high degree of structural disorders. These CNTs are expected to be utilized as catalyst supports in catalytic filters and purification systems.

• Applied Biological Chemistry
• /
• v.31 no.4
• /
• pp.331-338
• /
• 1988

Acetone powder was prepared from raw arrowroots and the polyphenol oxidases of crude enzyme prepared from acetone powder were identified 5 isoenzymes by staining with catechol containing 0.05% phenylene diamine. The crude enzyme was passed through the columns of ion exchangers and gel permeation to fractionate the polyphenol oxidases. The main fraction of polyphenol oxidase appeared to be purified by 94-fold, with the activity yield of 45.4%, and its molecular weight was determined as 38,500 by poly acrylamide gel electrophoresis. The optimal pH and temperature for the enzyme activity were pH 7.5 and $50^{\circ}C$, respectively. The purified enzyme showed a high affinity for catechol and pyrogallol. The Michaelis constant for catechol was calculated to be 16.67mM according to the Lineweaver-Burk method. The enzyme activity was strongly inhibited by L-ascorbic acid, sodium bisulfite, EDTA and KCN, and totally inhibited, by $Fe^{3+}$ at a concentration of 1mM. However the enzyme was activated by $Zn^{2+}$ approximately 1.7 times at the same concentration.

• Journal of Environmental Science International
• /
• v.22 no.10
• /
• pp.1263-1271
• /
• 2013

Graphene oxide (GO)-titania composites have emerged as an attractive heterogeneous photocatalyst that can enhance the photocatalytic activity of $TiO_2$ nanoparticles owing to their potential interaction of electronic and adsorption natures. Accordingly, $TiO_2$-GO mixtures were synthesized in this study using a simple chemical mixing process, and their heterogeneous photocatalytic activities were investigated to determine the degradation of airborne organic pollutants (benzene, ethyl benzene, and o-xylene (BEX)) under different operational conditions. The Fourier transform infrared spectroscopy results demonstrated the presence of GO for the $TiO_2$-GO composites. The average efficiencies of the $TiO_2$-GO mixtures for the decomposition of each component of BEX determined during the 3-h photocatalytic processes were 26%, 92%, and 96%, respectively, whereas the average efficiencies of the unmodified $TiO_2$ powder were 3%, 8%, and 10%, respectively. Furthermore, the degradation efficiency of the unmodified $TiO_2$ powder for all target compounds decreased during the 3-h photocatalytic processes, suggesting a potential deactivation even during such a short time period. Two operational conditions (air flow entering into the air-cleaning devices and the indoor pollution levels) were found to be important factors for the photocatalytic decomposition of BEX molecules. Taken together, these results show that a $TiO_2$-GO mixture can be applied effectively for the purification of airborne organic pollutants when the operating conditions are optimized.

• Journal of Powder Materials
• /
• v.17 no.4
• /
• pp.319-325
• /
• 2010

Electrical discharge machining (EDM) is an attractive machining technique but it requires electrically conductive ceramic materials. In this study, Alumina matrix composites reinforced with CNTs were fabricated through CNT purification, mixing, compaction and spark plasma sintering (SPS) processes. $Al_2O_3$ nanocomposites with the different CNT concentrations were synthesized. The mechanical and electrical characteristics of $Al_2O_3$/CNTs composites were examined in order to apply the materials to the EDM process. In addition, micro-EDM using wire electrical discharge grinding (WEDG) was conducted under the various EDM parameters to investigate the machining characteristics of machined hole by Field Emission Scanning Electron Microscope (FE-SEM). The results show that $Al_2O_3$/CNTs 10%Vol. was more suitable than the other materials because high conductivity and large discharge energy caused violent sparks resulting in bad machining accuracy and surface quality.

• Horticultural Science & Technology
• /
• v.16 no.2
• /
• pp.233-235
• /
• 1998

Energized-functional water (EFW) and powder (EFP) were manufactured by Kyungwon Institute of Life Science, Seoul, through a series of processes; tap water ultra-purification energy imprinting with catalysts in platinum columns mixing energy-imprinted water + activated zeolites + photosynthetic bacteria fermenting at $25^{\circ}C$ filtering EFW and/or EFP. A single application of EFP to soil under tree canopy before bud burst, combined with three EFW applications to soil during growth of 'Fuji' apples (Malus domestica Borkh.) resulted in a higher Ca concentrations in fruit skins and flesh, and lower Ca and N concentrations in leaves and shoot-bark tissues. EFW also stimulated the net photosynthesis of leaves and root activity. Soluble solid concentrations (SSC) and anthocyanin levels of fruits were also significantly increased at harvest, producing greater firmness and less core browning during storage at $0^{\circ}C$. However, there was no significant difference in titratable acidity of fruit juice between the EFW treatment and the controls.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.4
• /
• pp.479-488
• /
• 2008

Some biological activities such as an electron donating capacity, the contents of total polyphenol compounds and flavonoids, fibrinolytic activity and $\alpha$-glucosidase inhibitory activity have been detected in hot water extracts of Ligularia fischeri and Angelica gigas Nakai. To increase the usefulness of the functional ingredients for prevention and improvement of some metabolic disorders, ethanol-treated hot water extracts of Angelica gigas Nakai were prepared. A hot water extract of Ligularia fischeri has 92% of electron donating capacity, 39.4 mg/g of total polyphenol compounds, 24.8 mg/g of flavonoids and 29.8% of $\alpha$-glucosidase inhibitory activity, but no fibrinolytic activity. A hot water extract of Angelica gigas Nakai has 94.7% of electron donating capacity, 5.8 mg/g of total polyphenol compounds, 2.6 mg/g of flavonoids, 0.48 plasmin units of fibrinolytic activity and no $\alpha$-glucosidase inhibitory activity. However, with partial purification using cold ethanol treatment, the $\alpha$-glucosidase inhibitory activity of Angelica gigas Nakai was increased to 70.5%. Thus, we expected a more useful effect with the use of the addition of a cold ethanol-treated Angelica gigas Nakai extract. The L, b values of cold buckwheat noodles using a mixture of 0$\sim$3% of Ligularia fischeri powder and 0.5% of an ethanol-treated hot water extract of Angelica gigas Nakai were decreased with the addition of an increasing amount of Ligularia fischeri powder. Among the mechanical qualities, only adhesiveness was significantly higher in 3% Ligularia fischeri noodles. From sensory evaluation data, it was determined that these two functional ingredients did not ruin the color, texture, and overall acceptance of the cold buckwheat noodles. A higher amount of the extracts improved the quality of the product with little added cost.

• Journal of the Korean Magnetic Resonance Society
• /
• v.15 no.2
• /
• pp.175-186
• /
• 2011

Amyloid fibrils have long been known to be the well known ${\alpha}$-helix to ${\beta}$-sheet transition characterizing the conversion of cellular to scrapie forms of the prion protein. A very short sequence of Yeast prion-like protein, GNNQQNY (SupN), is responsible for aggregation that induces diseases. KSI-fused tandem repeats of SupN vector are constructed and used to express SupN peptide in Escherichia coli (E.Coli). A method for a production, purification, and cleavage of tandem repeats of recombinant isotopically enriched SupN in E. coli is described. This method yields as much as 20 mg/L of isotope-enriched fusion proteins in minimal media. Synthetic SupN peptides and $^{13}C$ Gly labeled SupN peptides are studied by Congo Red staining, Birefringence and transmission electron microscopy to characterize amyloid fibril formation. To get a better understanding of aggregation-structure relationship of 7 residues of Yeast prion-like protein, the change of a conformational structure will be studied by $^{13}C$ solid-state nmr spectroscopy as powder of both amorphous and fibrillar forms.