• Structural Engineering and Mechanics
• /
• v.13 no.6
• /
• pp.615-638
• /
• 2002

This paper presents a method of seismic analysis for a cylindrical liquid storage structure considering the effects of the interior fluid and exterior soil medium in the frequency domain. The horizontal and rocking motions of the structure are included in this study. The fluid motion is expressed in terms of analytical velocity potential functions, which can be obtained by solving the boundary value problem including the deformed configuration of the structure as well as the sloshing behavior of the fluid. The effect of the fluid is included in the equation of motion as the impulsive added mass and the frequency-dependent convective added mass along the nodes on the wetted boundary of the structure. The structure and the near-field soil medium are represented using the axisymmetric finite elements, while the far-field soil is modeled using dynamic infinite elements. The present method can be applied to the structure embedded in ground as well as on ground, since it models both the soil medium and the structure directly. For the purpose of verification, earthquake response analyses are performed on several cases of liquid tanks on a rigid ground and on a homogeneous elastic half-space. Comparison of the present results with those by other methods shows good agreement. Finally, an application example of a reinforced concrete tank on a horizontally layered soil with a rigid bedrock is presented to demonstrate the importance of the soil-structure interaction effects in the seismic analysis for large liquid storage tanks.

• Electrical & Electronic Materials
• /
• v.7 no.5
• /
• pp.376-382
• /
• 1994

In this study we developed a program(DEVSIM) to simulate the two dimensional distribution of the electrostatic potential and the electric field of the arbitrary structure consisting of GaAs/AlGaAs semiconductor and metal as well as dielectric. By the comparision of the electric field distribution of GaAs MESFETs with the various recess gates we proposed a suitable device structure to improve the breakdown characteristics of MESFET. According to the results of simulation the breakdown characteristics were improved as the thickness of the active epitaxial layer was decreased. And the planar structure, which had the highly doped layer under the drain for the ohmic contact, was the worst because the highly doped layer prevented the space charge layer below the gate from extending to the drain, which produced the narrow spaced distribution of the electrostatic potential contours resulting in the high electric field near the drain end. Instead of the planar structure with the highly doped drain the recess gate structure having the highly doped epitaxial drain layer show the better breakdown characteristics by allowing the extention of the space charge layer to the drain. Especially, the structure in which the part of the drain epitaxial layer near the gate show the more improvement of the breakdown characteristics.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.3
• /
• pp.225-230
• /
• 2016

Since the development of anodic aluminum oxide (AAO), extensive studies have been conducted ranging from fundamental research to the applications of AAO. Most of the research on AAO structures have focused on well-aligned nanoporous structures fabricated under specific conditions. This study investigated fabricable AAO structures with anodization performed with various temperatures, electrical potentials, and basal plane surfaces. As a result, nanoporous and nanofibrous structures were fabricated. The nanopores were formed at a relatively lower temperature and potential, and the nanofibers were formed at a relatively higher temperature and potential regardless of the basal plane surface. The shape of the base surface was found to influence the structural arrangement in nanoporous morphologies. These interesting findings relating to new morphologies have the potential to broaden the possible applications of AAO materials.

• Korean Journal of Crystallography
• /
• v.11 no.3
• /
• pp.173-175
• /
• 2000

Computational technique, based on the minimization of the crystal energy with respect to atomic coordinates, are shown to reproduce successfully complex crystal structure, in this case, strontium hexaaluminate magnetoplumbite, SrAl/sub 12/O/sub 19/. The experimental crystal structure and symmetry of the complex material is well reproduced with our potential models and some crystal physical properties are calculated.

• Journal of Integrative Natural Science
• /
• v.10 no.1
• /
• pp.20-26
• /
• 2017

Chemerin receptor, which predominantly expressed in immune cells as well as adipose tissue, was found to stimulate chemotaxis of dendritic cells and macrophages to the site of inflammation. Chemerin is a widely distributed multifunctional secreted protein implicated in immune cell migration, adipogenesis, osteoblastogenesis, angiogenesis, myogenesis, and glucose homeostasis. Recent studies suggest chemerin may play an important role in the pathogenesis of obesity and insulin resistance and it becomes a potential therapeutic target for treating type II diabetes. The crystal structure of chemerin receptor has not yet been resolved. Therefore, in the present study, homology modelling of CMKLR1 was done utilizing the crystal structure of human angiotension receptor in complex with inverse agonist olmesartan as the template. Since the template has low sequence identity, we have incorporated both threading and comparative modelling approach to generate the three dimensional structure. 3D models were generated and validated. The reported models can be used to characterize the critical amino acid residues in the binding site of CMKLR1.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.857-862
• /
• 2009

We model lattice-mismatched group III-V semiconductor $In_{x}Ga_{1-x}$ alloys with the three-parameter anharmonic Kirkwood-Keating potential, which includes realistic distortion effect by introducing anharmonicity. Although the potential parameters were determined based on optical properties of the binary parent alloys InAs and GaAs, simulated dielectric functions, reflectance, and Raman spectra of alloys agree excellently with experimental data for any arbitrary atomic composition. For a wide range of atomic composition, InAs- and GaAs-bond retain their respective properties of binary parent crystals despite lattice and charge mismatch. It implies that use of the anharmonic Kirkwood-Keating potential may provide an optimal model system to investigate diverse and unique optical properties of quantum dot heterostructures by circumventing potential parameter searches for particular local structures.

• Economic and Environmental Geology
• /
• v.36 no.1
• /
• pp.49-58
• /
• 2003

To analyze the anisotropic characteristics of fractured aquifer, variations of streaming potential were measured during and after pumping over several wells at the two test sites. Surface electrical resistivity survey, normal resistivity logging, and slug test were performed at the wells to identify the hydrogeological structure. Applying the results to the recently suggested model, the aquifer of the two test sites showed confined characteristics. Anisotropic direction appeared in using equi-potential maps from self-potential monitoring results matched well with the results of the hydrogeological test. The self-potential monitoring method adopted in this study would be useful for providing a more reliable information on the anisotropy of aquifer in the pumping test at single well.

• Journal of The Korean Astronomical Society
• /
• v.36 no.3
• /
• pp.223-239
• /
• 2003

It is now a well established fact that galaxies undergo significant morphological transformation during their lifetimes, manifesting as an evolution along the Hubble sequence from the late to the early Hubble types. The physical processes commonly believed to be responsible for this observed evolution trend, i.e. the major and minor mergers, as well as gas accretion under a barred potential, though demonstrated applicability to selected types of galaxies, on the whole have failed to reproduce the most important statistical and internal properties of galaxies. The secular evolution mechanism reviewed in this paper has the potential to overcome most of the known difficulties of the existing theories to provide a natural and coherent explanation of the properties of present day as well as high-redshift galaxies.

• Journal of Powder Materials
• /
• v.24 no.2
• /
• pp.96-101
• /
• 2017

Well-dispersed platinum catalysts on ruthenium oxide nanofiber supports are fabricated using electrospinning, post-calcination, and reduction methods. To obtain the well-dispersed platinum catalysts, the surface of the nanofiber supports is modified using post-calcination. The structures, morphologies, crystal structures, chemical bonding energies, and electrochemical performance of the catalysts are investigated. The optimized catalysts show well-dispersed platinum nanoparticles (1-2 nm) on the nanofiber supports as well as a uniform network structure. In particular, the well-dispersed platinum catalysts on the ruthenium oxide nanofiber supports display excellent catalytic activity for oxygen reduction reactions with a half-wave potential ($E_{1/2}$) of 0.57 V and outstanding long-term stability after 2000 cycles, resulting in a lower $E_{1/2}$ potential degradation of 19 mV. The enhanced electrochemical performance for oxygen reduction reactions results from the well-dispersed platinum catalysts and unique nanofiber supports.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.1
• /
• pp.19-24
• /
• 1992

The analysis of the resonant tunneling based on the exact solution of Schrodinger equations is performed in a single quantum well structure under applied bias. The transmittivity and the net tunneling current density are calculated with Airy function and the boundary conditions which is suggested by Bastard. The results are compared with those from other methods and boundary conditions. From the calculated J-V characteristics for the tunneling current, the dependence of the voltage location showing the first peak current on the various temperatures and Fermi level is investigated. In addition, the wave function within the structure is obtained and compared with that from the flat-potential model.