• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.6
• /
• pp.519-523
• /
• 2006

$LiFePO_4$ has been received attention as a potential cathode material for the lithium secondary batteries. In our study, $LiFePO_4$ cathode active materials were synthesized by a solid-state reaction. It was modified by coating $TiO_2$ and carbon in order to enhance cyclic performance and electronic conductivity. $TiO_2$ and carbon coatings on $LiFePO_4$ materials enhanced the electronic conductivity and its charge/discharge capacity. For lithium polymer battery applications, $LiFePO_4$/solid polymer electrolyte (SPE)/Li and $LiFePO_{4}-TiO_{2}/SPE/Li$ cells were characterized by a cyclic voltammetry and charge/discharge cycling. The electrode with $LiFePO_{4}-carbon-TiO_{2}$ in PVDF-PC-EC-$LiClO_{4}$ electrolyte showed promising capacity of above 100 mAh/g at 1C rate.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.146-152
• /
• 2014

Mg-Sn nanoparticles were prepared by an arc-discharge method in a mixture atmosphere of argon and hydrogen gases. Phases, morphologies, and microstructures of the nanoparticles were investigated by means of X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). It was found that the intermetallic compound of $Mg_2Sn$ was generated and coexisted with metallic phases of Mg and Sn within nanoparticles. Basedon the model cell, the electrochemical properties were also explored by discharge-charge cycling, cyclic voltammetry, and electrochemical impedance spectroscopy. The initial capacity of the first cycle reached 430 mAh/g. Two visible plateaus at 0.2-0.3 and 0.5-0.75V were observed in the potential profiles, which can attributed to alloying/de-alloying reactions between Li and Mg2Sn, respectively.

• Korean Journal of Materials Research
• /
• v.8 no.4
• /
• pp.323-327
• /
• 1998

All solid state lithium based rechargeable batteries were fabricated in a cell structure of Li/PEO-$LiCIO_4$-PC /$LIMn_2O_4$$LIMn_2O_4$ thin films were prepared by RF magnetron sputtering and the spinel structure could be obtained by Rapid Thermal Annealing (RT A) process at the temperature of around 750$750^{\circ}C$ . Room temperature cycling of this cell showed a nearly constant cell potential of 4 V( us. Li) and good reversibility.

• Mycobiology
• /
• v.51 no.5
• /
• pp.343-353
• /
• 2023

Lichens play crucial roles in the ecosystems, contributing to soil formation and nutrient cycling, and being used in biomonitoring efforts to assess the sustainability of ecosystems including air quality. Previous studies on heavy metal accumulation in lichens have mostly relied on manipulated environments, such as transplanted lichens, leaving us with a dearth of research on how lichens physiologically respond to heavy metal exposure in their natural habitats. To fill this knowledge gap, we investigated lichens from two of South Korea's geographically distant regions, Gangwon Province and Jeju Island, and examined whether difference in ambient heavy metal concentrations could be detected through physiological variables, including chlorophyll damage, lipid oxidation, and protein content. The physiological variables of lichens in response to heavy metals differed according to the collection area: Arsenic exerted a significant impact on chlorophyll degradation and protein content. The degree of fatty acid oxidation in lichens was associated with increased Cu concentrations. Our research highlights the value of lichens as a bioindicator, as we found that even small variations in ambient heavy metal concentrations can be detected in natural lichens. Furthermore, our study sheds light on which physiology variables that can be used as indicators of specific heavy metals, underscoring the potential of lichens for future ecology studies.

• Corrosion Science and Technology
• /
• v.22 no.6
• /
• pp.466-477
• /
• 2023

The increasing demand for high-performance energy storage systems has highlighted the limitations of conventional Li-ion batteries (LIBs), particularly regarding safety and energy density. All-solid-state batteries (ASSBs) have emerged as a promising next-generation energy storage system, offering the potential to address these issues. By employing nonflammable solid electrolytes and utilizing high-capacity electrode materials, ASSBs have demonstrated improved safety and energy density. Automotive and energy storage industries, in particular, have recognized the significance of advancing ASSB technology. Although the use of Li metal as ASSB anode is promising due to its high theoretical capacity and the expectation that Li dendrites will not form in solid electrolytes, persistent problems with Li dendrite formation during cycling remain. Therefore, the exploration of novel high-performance anode materials for ASSBs is highly important. Recent research has focused extensively on alloy-based anodes for ASSBs, owing to their advantages of no dendrite formation and high-energy density. This study provides a comprehensive review of the latest advancements and challenges associated with alloy-based anodes for ASSBs.

• Journal of the Korean Chemical Society
• /
• v.48 no.1
• /
• pp.46-52
• /
• 2004

The effect of crystallinity on the structural stability of layered manganese oxide has been systematically investigated. While well-crystalline manganate was prepared by solid-state reaction-ion exchange method, nanocrystalline one was obtained by Chimie-Douce reaction at room temperature. According to micro-Raman and Mn K-edge X-ray absorption spectroscopic results, manganese ions in both the manganese oxides are stabilized in the octahedral sites of the layered lattice consisting of edge-shared MnO6 octahedra. The differential potential plot clarifies that the layered structure of nanocrystalline material is well maintained during electrochemical cycling, in contrast to the well-crystalline homologue. From the micro-Raman results, it was found that delithiation-relithiation process for well-crystalline material gives rise to the structural transition from layered to spinel-type structure. On the basis of the present experimental findings, it can be concluded that nanocrystalline nature plays an important role in enhancing the structural stability of layered manganese oxides.

• Journal of Embryo Transfer
• /
• v.1 no.1
• /
• pp.35-49
• /
• 1986

Recipients are an integral part of embryo transfer and they are expensive to maintain as a good recipient. Recipient management is one of the most important components in a successful embryo transfer program. Management includes selection and subsequent care of the animals. A good recipient is basically on "open" cows or heffers whose reproductive tract is capable of receiving one or two embryos and incubating it to term. Potential recipients should be always be healthy and cycling normally ranging from 18 to 23 days. A thorough veterinary examination is recommended for candidate of recipients and cattle for questionable health should be eliminated from the recipient herd. Age and size of recipients are particularly important considerations when heifers are used, because of most embryos available for transfer are from large dams and sires. Body condition can influence a recipient's production, reproduction and health. Obese and underconditioned cattle should be avoided for use. Transfer of fresh embryos especially requires precise synchronization of donors and recipients. For estrus synchronization, PGF$_2$$\alpha$ is injected twice 10 to 12 days apart and short4erm progestagen treatment is applied to potential recipient cattle by coil into vagina (PRID) or ear implant (Synchro-Mate-B). The highest pregnancy results are achieved in recipients at exact synchrony with donors or 12 to 24 hr earlier than donors. Estrus detection is a major factor in breeding efficiency. High accuracy can be achieved by use of heat mount detection alds or by obserbing cattle for 30-minute peroids 3 times daily. Assay progesterone in milk can be used to discrIminate between pregnant and nonprenant recipients. Rectal palpation on day 35 to 70 after is an accurate and safe method of pregnancy diagnosis. Embryonic mortality in recipients may be associated with factors such as high environmental temperature and nutritional or lactational stress in early lactation period. Achievement of short calving interval requires concentrated management activity during the first 90 days following calving. Acceptable candidate for a recipient should be routinely vaccinated for infectious diseases. Proper nutritional programs according to NRC requirements and body condition scoring system for recipient cattles are vital to the ultimate success of an embryo transfer program.r program.

• Corrosion Science and Technology
• /
• v.14 no.4
• /
• pp.177-183
• /
• 2015

Prestressed Concrete steel Cylinder Pipe (PCCP) is extensively used as seawater pipes for cooling in nuclear power plants. The internal surface of PCCP is exposed to seawater, while the external surface is in direct contact with underground soil. Therefore, materials and strategies that would reduce the corrosion of its cylindrical steel body and external steel wiring need to be employed. To prevent against the failure of PCCP, operators provided a cathodic protection to the pre-stressing wires. The efficiency of cathodic protection is governed by the anodic performance of the system. A mixed metal oxide (MMO) electrode was developed to meet criteria of low over potential and high corrosion resistance. Increasing coating cycles improved the performance of the anode, but cycling should be minimized due to high materials cost. In this work, the effects of $RuCl_3$ concentration on the electrochemical properties and lifespan of MMO anode were evaluated. With increasing concentration of $RuCl_3$, the oxygen evolution potential lowered and polarization resistance were also reduced but demonstrated an increase in passive current density and oxygen evolution current density. To improve the electrochemical properties of the MMO anode, $RuCl_3$ concentration was increased. As a result, the number of required coating cycles were reduced substantially and the MMO anode achieved an excellent lifespan of over 80 years. Thus, we concluded that the relationship between $RuCl_3$ concentration and coating cycles can be summarized as follows: No. of coating cycle = 0.48*[$RuCl_3$ concentration, $M]^{-0.97}$.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.2
• /
• pp.126-131
• /
• 2007

The durability problem of Prussian blue in non-aqueous $Li_+$-based electrolytes has been due to the degradation of the Prussian blue electrode matrix during the insertion/extraction processes by $Li_+$. In this work, we designed and synthesised the Prussian blue without reducing the electrochromic performance in non-aqueous $Li_+$-based electrolytes. Prussian blue was electrodeposited on a glass which has ITO coating, and the coating solution is a mixture solution of $FeCl_3\;and\;K_3Fe(CN)_6$ with deionized water added HCl, KCl, and LiCl, respectively. The durability of Prussian blue was evaluated by an in-situ transmittance measurement during a continuous and pulse potential cycling test, and measured by electroactive layer thickness due to evaluating the degradation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.2
• /
• pp.146-154
• /
• 2011

An in vitro study on cariogenic potential of 8 over-the-counter syrups for children was performed. The experimental groups were 8 over-the-counter syrups. The positive control group was 10% sucrose solution, and the negative control group was artificial saliva. The pH of each group was determined. The buffering capacity was measured by the volume of 2 N NaOH adding to equalize the pH of 20 ml of experimental solution to pH 7. The consistency was measured by the time to pass Ostwald pipette for 2 ml of the experimental solution. The experimental solutions were inoculated with S. mutans and cultured in $37^{\circ}C$ anaerobic condition for 48 hours. To estimate acid production, pH of the experimental solutions were measured before and after the culture. The primary teeth specimens were soaked in the experimental solutions for 20 minutes three times a day. Except on those hours the specimens were stored in artificial saliva. After 5 days, the microhardness changes of the specimens were measured. These results show that most of syrup-form medicines for children tend to have cariogenic potential partially in endogenous pH, buffering capacity, consistency, acid production and erosive ability of enamel. For the oral health of children, the alternative sweeteners (ex. xylitol) may be substituted for the cariogenic sweeteners of syrups. Additionally, It may be helpful that the chewable tablet replace liquid or syrup in term of dose form.