• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.209-221
• /
• 2009

In the steel industry, steel is manufactured and processed to produce a variety of steel products. The industry provides fundamental materials to the whole range of industries including car, ship, electric appliance and construction industries, so that it is very important as an infrastructure industry. The steel manufacture process involves aerial work, many danger factors caused by the treatment with hazardous gases including BFG and COG and by high pressure gases including H2, O2, N2 and LPG. It requires the management over the large area because many workers work in a plant. The potential dangers in the steel plant were identified and the effect of the danger assessment was verified through the analysis of the danger assessment for the steel plant. The allowed degree of danger was lowered after the improvement through the danger assessment in the plant where the case studies were conducted, which indicates that the danger assessment is highly effective.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.4
• /
• pp.93-104
• /
• 2008

A successful fire risk assessment is depends on identification of risk, the analytical process of potential risk, on estimation of likelihood and the width and depth of consequence. Take the influence on enterprise into consideration, Fire risk assessment could carry out along the evaluation of the risk importance, the risk level and the risk acceptance. A large part of the limitation of choosing the risk assessment techniques impose restrictions on expense and time. If it is unnecessary high level risk assessment or Probabilistic Risk Assessment of buildings, in compliance with the Relative Ranking Method, Fire risk indexing and assessing is possible. As working-level technique, AHP method is useful with practical technique.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.384-391
• /
• 1997

The hazard assessment in which the potential hazard factors In the buildings are investigated and the scale of the hazard is analyzed should be performed first in order to prevent personal and material damages due to building fire. In this study, the building fire hazard are assessed using 822-item checklist, for the qualitative evaluation of which the main factors are classified into 10 items, yielding 100 scale points with some weighting. It is shown that present model is applicable for the assessment of all general buildings through the examination of the suitability of assessment model by actual assessment of existing building. Also, the checklist is prepared in itemized questionnaire form for easy assessment of building fire hazard. Therefore, the present model will be helpful for those working in fire prevention, who are suffering from the lack of manifest evaluation model for the fire prevention assessment so far in Korea.

• Proceedings of the PSK Conference
• /
• 2001.04a
• /
• pp.138.3-139
• /
• 2001

• Journal of Arbitration Studies
• /
• v.7 no.1
• /
• pp.76-116
• /
• 1997

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.1
• /
• pp.1-12
• /
• 2015

Beginning of the human ecology in 1920s, the efforts for applying the environmental values to a policy have been embodied by the enactments of international agreement and relevant laws. The government has been struggling to adopt the environmental values for the policy by enacting the relevant laws and establishing the environmental value evaluation information (environmental conservation value assessment map, eco-natural map, biotope map). In spite of the efforts to apply the environmental value assessment information for the habitat potential of wildlife, the application is being challenged by the discrepancy in methods and criteria. Thus this study intends to measure the potential of wildlife habitat and apply it to the spatial value classification for the application plan of wildlife habitat potential in policy. Maxent was used for the habitat potential and the land types were classified depending on the surface and land use pattern of cadastral map. As a result, the policy matrix including conservation strategy(CS), restoration strategy(RS), practical use strategy(PS) and development strategy(DS) has been deduced as CS $13.05km^2$(2.38%), RS $1.64km^2$(0.30%), PS $162.42km^2$(29.57%) and DS $8.56km^2$(1.56%). CS was emerged mostly on forest valleys and farmlands, and RS was appeared in the road area near the conservation strategy areas. Boryung downtown and Daecheon Beach were the center of DS, while the forest and farmlands were presented as PS. It is significant that this study suggest the new approaching method by comparing the wildlife habitat potential with the land type. Since this study evaluated the environmental value by one species of leopard cat (Prionailurusbengalensis) with Maxent model, it is necessary to apply the habitat potential measuring method for various target species as further research.

• Earthquakes and Structures
• /
• v.23 no.3
• /
• pp.259-269
• /
• 2022

In this study, we introduce a canonical correlation analysis method to accurately assess the tunnel damage potential of ground motion. The proposed method can retain information relating to the initial variables. A total of 100 ground motion records are used as seismic inputs to analyze the dynamic response of three different profiles of tunnels under deep and shallow burial conditions. Nine commonly used ground motion parameters were selected to form the canonical variables of ground motion parameters (GMP_CCA). Five structural dynamic response parameters were selected to form canonical variables of structural dynamic response parameters (DRP_CCA). Canonical correlation analysis is used to maximize the correlation coefficients between GMP_CCA and DRP_CCA to obtain multivariate ground motion parameters that can be used to comprehensively assess the tunnel damage potential. The results indicate that the multivariate ground motion parameters used in this study exhibit good stability, making them suitable for evaluating the tunnel damage potential induced by ground motion. Among the nine selected ground motion parameters, peck ground acceleration (PGA), peck ground velocity (PGV), root-mean-square acceleration (RMSA), and spectral acceleration (Sa) have the highest contribution rates to GMP_CCA and DRP_CCA and the highest importance in assessing the tunnel damage potential. In contrast to univariate ground motion parameters, multivariate ground motion parameters exhibit a higher correlation with tunnel dynamic response parameters and enable accurate assessment of tunnel damage potential.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.354-355
• /
• 2003

In this study, a risk-based cleanup approach using the leaching potential was suggested for the soil vapor extraction (SVE) process. A multi-component model was adopted with local equilibrium assumption (LEA), and Raoult's law was applied to estimate the leaching potential for BTEX. Finally, a risk analysis was conducted based on the leaching pontential calculated. To complete the feasibility of this approach, more investigations and discussions will be required in future.

• 대한예방의학회:학술대회논문집
• /
• 1994.02a
• /
• pp.23-56
• /
• 1994

Recent criticisms of the conduct and use of risk assessment by regulatory agencies have led to a wide range of proposed remedies, including changes in regulatory statutes and the development of new methods for assessing risk. The mandate to this Committee was more limited. Our objective was to examine whether alterations in institutional arrangements or procedures, particularly the organizational separation of risk assessment from regulatory decision-making and the use of uniform guidelines for inferring risk from available scientific information, can improve federal risk assessment activities. Before undertaking to determine whether organizational and procedural reforms could improve the performance and use of risk assessment in the federal government, the Committee examined the state of risk assessment and the regulatory environment in which it is performed. In this chapter, we define risk assessment and differentiate it from other elements in the regulatory process, analyze the types of judgments made in risk assessment, and examine its current government context. Because one chronic health hazard, cancer, was highlighted in the Committee's congressional mandate and has dominated public concern about public health risks in recent years, most of our report focuses on it. Furthermore, because activities in four agencies--the Environmental Protection Agency (EPA), the Food and Drug Administration (FDA), the Occupational Safety and Health Administration (OSHA), and the Consumer Product Safety Commission (CPSC)--have given rise to many of the proposals for changes in risk assessment practices, our review focuses on these four agencies. The conclusions of this report, although directed primarily at risk assessment of potential carcinogens as performed by these four agencies, may be applicable to other federal programs to reduce health risks.

• Toxicological Research
• /
• v.21 no.4
• /
• pp.297-301
• /
• 2005

Farmers are generally expressed to pesticides through mixing loding, application activity and harvesting of crop after application of pesticides. The present work investigated the exposure and risk of furathiocarb to workers when harvesting of cucumber was carried out in green house after application of furathiocarb EC. Glove was used for the hand exposure assessment, socks for foot and dermal patches for the other parts of body. Personal air monitor equipped with a XAD-2 resin was used for the respiratory exposure assessment. During the harvest of cucumber in green house, the initial rate of potential dermal exposure (Day 1) for methidathion was 1.3 mg/hr. The major exposure parts were hand $(78\~83\%),\;thigh\;(5\~7\%)$ and arms $(6\~9\%)$ during 3 days' harvest. No exposure was detected from the respiratory monitoring. For risk assessment, the potential dermal exposure (PDE), the absorbable quantity of exposure (AQE) and the margin of safety (MOS) and margin of exposure (MOE) were calculated. In risk assessment of harvester exposure for 7days, all MOS was > 1 and MOE was > 100 indicating that possibility of risk was little.