• 한국안전학회지
• /
• 제26권3호
• /
• pp.69-74
• /
• 2011

Despite most of tasks in manufacturing, construction and agriculture, etc., were currently mechanized and automated, manual materials handling still existed in atypical working condition. In case of manual materials handling, repetitive work, inappropriate working posture, excessive force, contact stress might cause overload, which could lead to work-related musculoskeletal disorders and low back pains. On this basis, the goal of this study is to reveal the effects of various lifting postures of trunk angles and lower extremity postures on maximum holding time(MHT). Twenty two subjects were recruited from a university population. The experiment was designed by a combination of three trunk angle ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) and three lower extremity postures(straight, bent, kneeling). Before experimental trials, subjects performed MVC(maximum voluntary contraction) exertions in three trunk angles ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) to calculate 30%MVC at designated postures. In each trial, they were required to hold the handheld load(30%MVC) for a designated posture as long as they could. The results of MVC by trunk angles were measured in $0^{\circ}$ > $20^{\circ}$ > $60^{\circ}$ orders, but those of MHT measured in $20^{\circ}$ > $0^{\circ}$ > $60^{\circ}$ orders. These results showed that straight posture is the ideal working posture in work exerted a strong force for a short time, but the ability to work might be improved in the trunk angle $20^{\circ}$ in work required 30%MVC for a long time. Also, results of MVC and MHT by lower extremity postures measured in straight > bent > kneeling orders.

• 국제물리치료학회지
• /
• 제11권1호
• /
• pp.1960-1968
• /
• 2020

Background: The alignment of the neck and shoulder is important in people with forward head posture. However, previous studies have mainly conducted fragmentary studies on the neck and shoulders, and studies on the combined movement of the neck and shoulders are incomplete. Objective: To investigate the effects of 6 week dynamic exercise program using Thera-band on craniovertebral angle (CVA) in adults with forward head posture. Design: Quasi-experimental study. Methods: The study was conducted on 24 adults with forward head posture and experimented with neck and shoulder exercises and divided them into groups of neck exercises, shoulder exercises, and neck and shoulder exercises to measure CVA values before and after the experiment. The neck exercise program included flexion and extension muscles of the neck and shoulder exercises included dynamic exercise of the upper extremities such as the trapezius muscles and serratus anterior muscle. The CVA results were measured using PA200. Results: Following the interventions, neck exercise group showed significant improvement in CVA (P<.05), but shoulder exercise group and combined exercise group did not show any significant results (P>.05). However, both groups showed some positive results. Significant differences were seen in the comparisons between the three groups (P<.05), and the results of the post-hoc test showed significant differences in neck exercise group and shoulder exercise, neck exercise and combine exercise group. Conclusion: This study suggested that the Thera-band neck exercise is beneficial for foward head posture patients and is expected to be used in clinical trials.

• 대한물리의학회지
• /
• 제13권4호
• /
• pp.149-162
• /
• 2018

PURPOSE: The aim of this study was to investigate the effect of scapular dynamic taping on pain, disability, upper body posture, and range of motion (ROM) in the postoperative shoulder. METHODS: Twenty-two patients who underwent acromioplasty and rotator cuff repair surgery volunteered for this study. The subjects were randomly divided into an experimental group (EG, n=11) and a control group (CG, n=11). For the EG, exercise therapy, manual therapy, and scapular dynamic taping were applied for 6 weeks; for the CG, only exercise therapy and manual therapy were applied for 6 weeks. Shoulder pain, disability, upper body posture, and ROM were evaluated at baseline, after 3 weeks of intervention, and after 6 weeks of intervention. Assessment tools included quadruple visual analog scale (QVAS) for level of pain; shoulder pain and disability index (SPADI) for functional disability level; forward head angle (FHA), forward shoulder angle (FSA), and pectoralis minor index (PMI) for upper body posture; and ROM testing. RESULTS: Significant differences were observed between the EG and CG in SPADI total scores; internal rotation and external rotation ROM of the glenohumeral joint ; FSA ; and PMI. All groups showed statistically significant improvement in QVAS; SPADI; flexion; abduction; external rotation and internal rotation ROM of the glenohumeral joint; FSA; and PMI. CONCLUSION: These results suggest that, for patients who have undergone acromioplasty and rotator cuff repair surgery, the addition of scapular dynamic taping during therapy is effective for improvement of shoulder disability level, ROM, and upper body posture.

• 한국노년학
• /
• 제37권1호
• /
• pp.237-250
• /
• 2017

본 연구의 목적은 넘어짐 예방 운동이 여성노인의 체력, 자세, 낙상효능감에 미치는 영향을 규명하는 것이다. 연구 대상은 65세 이상의 여성노인 30명을 대상으로 하였으며, 그 중 14명은 운동집단, 16명은 비교 집단으로 하였다. 넘어짐 예방운동 프로그램은 탄성밴드를 이용한 다방향 근력 근지구력, 파워 운동, 자세 정렬 운동과 한국무용 동작을 접목한 다방향 동적균형, 협응력 운동으로 구분하였고 총 12주간, 주 2회, 각 60분으로 진행하였다. 운동 프로그램 전후의 체력, 자세, 낙상 효능감을 측정하여 비교하였다. 연구 결과 운동 집단은 악력을 제외한 근지구력, 심폐지구력, 유연성, 평형성, 협응력에서 유의하게 증가하였고, 자세는 상체 기울기를 제외한 어깨 기울기, 견갑골 기울기, 골반 기울기, 종골각 기울기, 다리길이 차이가 유의하게 감소하였다. 낙상 효능감 점수는 운동 집단에서는 증가하고 비교 집단에서 감소하였으나, 모두 통계적으로 유의하지는 않았다. 그러므로 넘어짐 예방운동은 체력 향상과 자세교정에 효과적이라는 결론을 내릴 수 있다. 그러나 악력(근력)을 증가하는 것과 상체기울기를 교정하는 운동프로그램의 보완이 필요하다.

• Journal of information and communication convergence engineering
• /
• 제8권2호
• /
• pp.191-196
• /
• 2010

This paper presents automatic generation of robot motion using posture template in physical training system. In this system, we define a human-like generic template with two angles, then, we generate robot motion that has used angle data of the created template. The angle data is transformed automatically to the most similar motion. This is achieved by suitable expressions for robot specification. The expressions intend to differences of angle measurement on X,Y,Z planes and DOF constraint. We choose several postures and create generic templates for chosen postures. Robot motions are also generated from generic templates by expressions.

• 대한인간공학회지
• /
• 제18권2호
• /
• pp.57-69
• /
• 1999

The primary objective of this research was to suggest the design dimensions of automotive seating package that has an important effect upon seating package design. To conduct the research, a set of manikin dimensions that are representative for Korean was determined by using a statistical scheme. With these dimensions, we generated nine manikins for male and female, respectively. Also, the preferred driving posture was investigated using the experimental setup. To find each joint angle for subjects, a driving monitoring system was developed and a three dimensional motion analysis system was employed. The joint angle for the subject was established and compared with related literature. With the generated manikins and each joint angle, the driving posture was simulated by using SAFEWORK that is a program to generate manikins. The positions and adjustable ranges from the accelerator heel point to the hip point and the steering wheel center point that are important variables in order to design seating package were suggested. Further research is needed to determine the seating package dimensions three dimensionally.

• 대한안전경영과학회지
• /
• 제14권2호
• /
• pp.11-22
• /
• 2012

The purpose of this study was to compare drivers' postures with different car pedal systems and skilled levels. Fourteen subjects participated in this experiment and for three-dimensional analyses, six cameras (Proreflex MCU-240, Qualisys) were used to acquire raw data. The parameters were calculated and analyzed with Visual-3D. In conclusion, the patterns of pelvic, hip, knee and ankle joint angles were different as to pedal systems and skilled levels, and distal joints ROA pelvis have large angles. ROA(range of angle) of a double pedal system was small, but ROA of a single pedal system was large. These findings suggested that we should improve a present single pedal system.

• 한국전문물리치료학회지
• /
• 제24권3호
• /
• pp.30-39
• /
• 2017

Background: Scapular posterior tilt (SPT) is important in the prevention of abnormal scapular movement and pain during elevation of the arm. However, previous studies have overlooked increased upper trapezius (UT) muscle activity interrupting the normal force couple of scapular motion and compensation of levator scapulae (LS) muscle activated simultaneously with UT during SPT exercise. Objects: The purpose of this study was to compare the effects of modified SPT with depression exercise versus SPT exercise on serratus anterior (SA), lower trapezius (LT), UT, and LS muscle activities and the clavicular tilt angle, in subjects with rounded shoulder posture (RSP) and myofascial pain in the UT muscle region. Methods: Eighteen subjects with RSP were recruited and randomly allocated to 2 groups; 9 in the SPT group and 9 in the SPT with depression group. All subjects met the specific RSP criteria and had myofascial pain of UT region. Depending on the allocated group, subjects performed the assigned SPT exercise and EMG data were recorded during the each exercise. Clavicular tilt angle was defined as the angle between the line joining the medial and lateral end of the clavicle and a horizontal line. Results: The SA muscle activity was significantly greater in SPT with depression than with SPT exercise (p<.05). The UT, LS muscle activity and the clavicular tilt angle was significantly lower in SPT with depression than with SPT exercise (p<.05). Conclusion: These findings were insightful because the potential risk of pain from overactivation of the UT and LS was considered, in contrast with SPT exercise. SPT with depression exercise can be implemented as an effective method to facilitate scapular muscle activity for stability and to prevent myofascial pain in the neck and shoulder.

• 대한물리치료과학회지
• /
• 제24권3호
• /
• pp.56-63
• /
• 2017

Purpose: This study aimed to investigate the effects of sitting posture on cervical flexion angle and pain during smart phone use. Method: This research was performed on 10 adult female students who use smart phones regularly, Each of the two groups of participants used the provided smart phone for 20 minutes while maintaining the given default posture. The evaluation order was randomly selected and the two groups were photographed twice before and after the experiment and were asked to answer if they felt pain during or after the experiment. Result: First, both upright sitting position and vertebra bent position pre and post experiment readings showed significant statistical difference (p<.05). And it is shown to be a factor that induces pain around the neck via increase in neck flexion angle. Second, although there were no significant statistical difference between the pre and post experiment readings of the upright sitting position results and the vertebra bent position results, the vertebra bent position readings showed bigger changes to the neck flexion angle then the upright sitting position readings. Third, all participants from both groups claimed pain in all the tested postures of smart phone usage. Conclusion: Smart phone usage for an extended amount of time in all body postures may prove to have a negative effect making the "optimal" smart phone usage position as a controlled time with neck stretches included in between short sessions.

• 대한통합의학회지
• /
• 제8권2호
• /
• pp.97-107
• /
• 2020

Purpose : The purpose of this study is to investigate the effect of squat exercise using a ball on the gap between knees and Q angle of a subject with a genu-varum, and to prove the effect, to provide a clinical basis for developing into a knee correction exercise program. Methods : As a result of posture measurement through GPS, 26 female with genu-varum with a knee length of 5 cm or more were studied. The group was randomly assigned to 13 squat exercise group using ball (experimental group) and 13 general squat exercise groups (control group). The experimental group placed the ball between both knees in a position where the distance between both feet was slightly wider than the shoulder width on a flat support surface, and fixed the ball, and then squat with the start signal. The control group squats without a ball. Each group performed three sets of exercise three times a week for six weeks. Before their exercise, after three and six weeks, EMG, GPS, digital goniometer measurement, the vastus medialis (VM), the vastus lateralis (VL), and the Q-angle were measured in the squat exercise posture. EMG was measured in squat exercise posture. Results : The distance between the knees was reduced. EMG is activated in group A, the group B experimental results showed the high activity of the VL. Q-angle had increased. But the experimental group increased more than the control group. Conclusion : We have confirmed through our experiments that the distance interval between the knees during squat exercises using a ball can be reduced. Furthermore, it would also be helpful to ensure the treatment of genu-varum.