• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.4
• /
• pp.321-329
• /
• 2002

Bending moments results from offset overloading of dental implant, which may cause stress concentrations to exceed the physiological capacity of cortical bone and lead to various kinds of mechanical failures. The purpose of this study was to compare the distributing pattern of stress on the finite element models with the different angulated placement of dental implant in mandibular posterior missing areas. The three kinds of finite element model, were designed according to 3 main configurations: Model 1(parallel typed placement of 2 fixtures), Model 2(15. distal angulated placement of one fixture on second molar area), Model 3(15. mesial angulated placement of one fixture on second molar area). The cemented crowns for mandibular first and second molars were made on the two fixtures (4mm 11.5). Three-dimensional finite element models by two fixtures were constructed with the components of the implant and surrounding bone. A 200N vertical static load were applied to the center of central fossa and the point 2mm apart from the center of central fossa on each model. The preprocessing, solving and postprocessing procedures were done by using FEM analysis software NISA/DISPLAY IV Version 10.0((Engineering Mechanics Research Corporation, USA). Von Mises stresses were evaluated and compared in the supporting bone, fixtures, and abutment. The results were as following : (1) Under the point loading at the central fossa, the direction of angulated fixture affected the stress pattern of implants. (2) Under the offset loading, the position of loading affected more on the stress concentration of implants compare to the angulated direction of implants. The results had a tendency to increase the stress on the supporting bone, fixture and screw under the offset loads when the placement angulation of implant fixture is placed toward mesial or distal direction. In designing of the occlusal scheme for angulated placement, placing the occlusal contacts axially during chewing appears to have advantages in a biomechanical viewpoint.

• Clinics in Shoulder and Elbow
• /
• v.1 no.2
• /
• pp.242-249
• /
• 1998

Stiffness of the elbow joint is relatively common after trauma, ectopic ossification, bum, postoperative scar, and etc. Mild flexion deformity can be reduced by use of active or passive motion exercise, dynamic sling, hinged distractor device, or turnbuckle orthosis. But these methods have disadvantages of difficulty in gaining acceptable range of motion only with stretching exercise, re-contracture after conservative managements and poor results that flexion contracture remained. The common described operative exposures for treatment of the stiff elbow are anterior, lateral, posterior, and medial approach. Through Anterior, lateral and medial approach each has not access to all compartments of the elbow. But, posterior approach has benefits that access to posterior, medial and lateral aspects of the elbow and as needed, fenestration to the olecranon fossa that produces a communication between the anterior and posterior compartments of the elbow are possible. From June 1991 through April 1997, 11 patients who had posttraumatic stiff elbow, were treated with debridement arthroplasty through the posterior approach. The purpose of this study are to introduce technique of the debridement arthroplasty and to evaluate final outcomes. With regarding to preoperative pain degree, mild degree matches to 3 cases, moderate to 3 cases, and severe to 2 cases. In preoperative motion, flexion was average 85° and extension was 30°. Postoperatively nine patients had got the complete relief of pain and two patients continued to have mild pain intermittentely. Postoperative flexion improved to 127° and extension to 2°, so that elbow flexion had improved by an average of 42° and elbow extension by 28°. On the objective scale all patients had good or excellent results and they all felt that they were improved by operation. Debridement arthroplasty is one of excellent procedures for the intractable stiff elbow if it is not unstable or it has not incongrous. But it need a meticulous operative technique and a well-programmed rehabilitation.

• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.85-106
• /
• 1986

The purpose of this investigation was to know the means of the T.M.J. space and to compare spational differences in centric relation and centric occlusion by the T.M.J. Tomogram and to study the correlation between the articular eminence slope and the lingual surface slope of the maxillary central incisor by the Cephalogram in near normal occlusion subjects. These results could give contribution for the diagnosis of orthodontic treatment and T.M.J. dysfunction and the assessment of orthopedic treatment and orthognathic surgery. 44 young adults (28 men and 16 women, 21 to 27 years of age) were selected from the Dental students in Yonsei Univ. Criteria for selection was normal occlusion, no clinical signs and T.M.J. dysfunction, no history of orthodontic treatment, and no missing tooth. After submental vertex view analysis. each subject was given the T.M.J. Tomogram in centric relation and centric occlusion and the Cephalogram was given with Quint Sectograph. All data was recorded and statistically processed with the CYBER computer system. Results were analyzed: the following findings and conclusions were derived. 1. The mean value for the combined right and left anterior joint space was 2.549mm, the posterior space was 2.260mm, and superior space was 3.31mm in centric relation. The anterior space was 2.316mm, posterior space was 2.474mm, and superior space was 3.435mm in centric occlusion. 2. In the centric relation position, both condyles were placed more posterioly and superioly in their fossae than in the centric occlusion position by the spatial difference. 3. In the centric occlusion position, both condyles were more symmetrically placed in their fossae with equal anterior-posterioly rather than in the centric relation position. 4. The mean articular eminence angle was $48.19^{\circ}$ and the mean fossa height was 7.911mm. A strong positive correlation between the articular eminence angle and fossa height in T.M.J. Tomogram was found. 5. In Cephalometric analysis, there was a strong positive correlation between the articular eminence slope and the lingual surface slope of the upper central incisor to the FH plane, occlusal plane, and S-N plane. 6. There was moderate positive correlation between the S-E measurements and the fossa height, articular eminence angle, and DcGn < F-H.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.2
• /
• pp.351-364
• /
• 1992

Internal derangement of the temporomandibular joint can be defined an abnormal relationships of the meniscus relative to the mandibular condyle, articuar fossa and eminence. This may cause variable mandibular dysfunctions and pain. For diagnosis, arthrography, computed tomography and magnetic resonance imaging are used. In this study, the author reviewed 98 TMJs of 88 patients who were diagnosed as internal derangement througth inferior joint space arthrography at the department of Oral & Maxillofacial Radiology, Dental Hospita, Dankook university through 1986 to 1992. 98 TMJs consisting of 30 disc displcement with reduction, 48 disc displcement without reduction and 20 perforation were studied about clinical and radiological findings. The results were as follows: 1. Internal derangement was found most frequently in the 2nd 3rd decades and the average age of perforation was higher than that of disc displcement with higher than that of disc displcement with reduction. The sexual predilection was 2 times hiher in females. 2. The most frequent chief complaints were TMJ sound in disc displcement with reduction, pain and limitation of mouth opening in disc displcement without reduction and pain in perforation. The duration of the chief complaints was longer in disc displcement with reduction with than in preforation and disc displcement without reduction. 3. Reciprocal click was the most frequently TMJ sound in disc displcement with reduction. History of joint sound in disc displcement without reduction an crepitus in perforation was the most frequent one. 4. The average maximum opening was 45.4㎜ in disc displcement with reduction, 31.4㎜ in disc displcement without reduction and 33.8㎜ in perforation. 5. In the centric occlusion, posterior condylar position was the most frequent in disc displcement with reduction. posterior and concentric condylar position was frequent in disc displcement without reduction, concentric and anterior condylar position in perforation. At 1 inch opening, the same position to articular eminence was most frequently found in disc displcement with reduction, posterior position in disc disp1cement without reduction, posterior and nterior position in perforation was frequently found. 6. Bony changes, especially sclerosis and flattening, was most frequently found in perforation.

• Journal of Oral Medicine and Pain
• /
• v.16 no.1
• /
• pp.33-72
• /
• 1991

The purpose of this study was to investigate the stress distribution and the displacement in the temporomandibular joints following the teeth loss patterns. The three dimensional finite element method was used for a mathematical model. The finite element model was composed of 1,632 elements and 2,411 nodes in the mandible with articular disc and mandibular fossa of the temporal bone. The masseter, the temporal and the internal pterygoid muscle forces were applied at each insertion site, bisecting point of gonion and antegonion, tip of the coronoid process, and gonion at the ration of 2:2:1 respectively. The directions of muscles force were obtained from frontal and lateral cephalometric tracings using bony landmarks of the skull. The results were as follows : 1. In control model, the minimum principal stresses were concentrated on the region of anterosuperior part of the condyle head and articular disc, and maximum principal stresses on the anterior part of the condyle head and posterolateral part of the articular disc. 2. In case of unilateral teeth loss, the greater principal stress appeared at the teeth loss side and the principal stresses increased at the teeth loss side as the number of the posterior teeth loss went up. 3. In case of bilateral teeth loss, the principal stresses were greater than those of the control model and as the number of the posterior teeth loss increased, the grater principal stresses on the temporomandibular joints appeared at the both side. 4. When the posterior teeth existed bilateral, the principal stress patterns were similar to those of the control model. 5. The displacement ws directed mainly upward and backward in the upper part of the temporomandibular joints and upward and forward in the largest part of the condyle head. The displacement increased as the number of the posterior teeth loss went up.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.5 no.2
• /
• pp.151-158
• /
• 2010

Objective : SLAP is rupture of biceps brachii muscle tendon and it's origin, posterior side of superior labral to anterior glenoid fossa. Snapping and Pain, instability are its typical symptoms. SLAP is physical damage so surgeons use arthroscopy. In point of surgeons view, a conservative medicine is not effective for lesion of labrum. So In this article, we report a result of conservative treatment for the amatuer baseball player diagnosis with type 2 superior labral anterior posterior lesion. Methods : In this case, patient played amatuer baseball for 2 years, had diagnosis with type 2 Superior labral anterior posterior lesion by MRI after right shoulder Injury. OS recommened arthroscopy surgery. But he receive conservative Korean medicin treatment in Korean medicine hospital, including Atx, BV, herbal acupunture and rehabilitation excersise. Results : After 6 months, in the end of continuous conservative treatment and rehabilitation excersise, patient can play baseball normally, and felt a little pain. But In physical examination, he still has a some abnormal signs. Conclusion : A Conservative treatment for an amatuer baseball player diagnosis with SLAP type 2 was effective in restore of fuctional activities, but usefulness of this treatment needs more study.

• Imaging Science in Dentistry
• /
• v.46 no.2
• /
• pp.127-131
• /
• 2016

Purpose: This study was performed to compare the condylar position in patients with temporomandibular joint disorders (TMDs) and a normal group by using cone-beam computed tomography (CBCT). Materials and Methods: In the TMD group, 25 patients (5 men and 20 women) were randomly selected among the ones suffering from TMD according to the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD). The control group consisted of 25 patients (8 men and 17 women) with normal temporomandibular joints (TMJs) who were referred to the radiology department in order to undergo CBCT scanning for implant treatment in the posterior maxilla. Linear measurements from the superior, anterior, and posterior joint spaces between the condyle and glenoid fossa were made through defined landmarks in the sagittal view. The inclination of articular eminence was also determined. Results: The mean anterior joint space was 2.3 mm in the normal group and 2.8 mm in the TMD group, respectively. The results showed that there was a significant correlation between the superior and posterior joint spaces in both the normal and TMD groups, but it was only in the TMD group that the correlation coefficient among the dimensions of anterior and superior spaces was significant. There was a significant correlation between the inclination of articular eminence and the size of the superior and posterior spaces in the normal group. Conclusion: The average dimension of the anterior joint space was different between the two groups. CBCT could be considered a useful diagnostic imaging modality for TMD patients.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.166-179
• /
• 2008

Excessive concentration of stress which is occurred in occlusion around the implant in case of the implant supported fixed partial denture has been known to be the main cause of the crestal bone destruction. Therefore, it is essential to evaluate the stress analysis on supporting tissue to get higher success rates of implant. The purpose of this study was to evaluate the effects of stress distribution and deformation in 3 different types of three-unit fixed partial denture sup-ported by two implants, using a three dimensional finite element analysis in a three dimensional model of a whole mandible. A mechanical model of an edentulous mandible was generated from 3D scan, assuming two implants were placed in the left premolars area. According to the position of pontic, the experiments groups were divided into three types. Type I had a pontic in the middle position between two implants, type II in the anterior posi-tion, and type III in the posterior position. A 100-N axial load was applied to sites such as the central fossa of anterior and posterior implant abutment, central fossa of pontic, the connector of pontic or the connector between two implants, the mandibular boundary conditions were modeled considering the real geometry of its four-masticatory muscular supporting system. The results obtained from this study were as follows; 1. The mandible deformed in a way that the condyles converged medially in all types under muscular actions. In comparison with types, the deformations in the type II and type III were greater by 2-2.5 times than in the type I regardless of the loading location. 2. The values of von Mises stresses in cortical and cancellous bone were relatively stable in all types, but slightly increased as the loading position was changed more posteriorly. 3. In comparison with type I, the values of von Mises stress in the implant increased by 73% in Type II and by 77% in Type III when the load was applied anterior and posterior respectively, but when the load was applied to the middle, the values were similar in all types. 4. When the load was applied to the centric fossa of pontic, the values of von Mises stress were nearly $30{\sim}35%$ higher in the type III than type I or II in the cortical and cancellous bone. Also, in the implant, the values of von Mises stress of the type II or III were $160{\sim}170%$ higher than in the type I. 5. When the load was applied to the centric fossa of implant abutment, the values of von Mises stress in the cortical and cancellous bone were relatively $20{\sim}25%$ higher in the type III than in the other types, but in the implant they were 40-45% higher in the type I or II than in the type III. According to the results of this study, musculature modeling is important to the finite element analysis for stress distribution and deformation as the muscular action causes stress concentration. And the type I model is the most stable from a view of biomechanics. Type II is also a clinically accept-able design when the implant is stiff sufficiently and mandibular deformation is considered. Considering the high values of von Mises stress in the cortical bone, type III is not thought as an useful design.

• The korean journal of orthodontics
• /
• v.13 no.2
• /
• pp.155-163
• /
• 1983

Many different appliances have been used to move teeth or to attempt to inhibit or stimulate growth of the jaws. Especially, Orthopedic force was used to apply a constant force on the mandible. Various orthopedic forces bring the changes of surrounding tissue, growth and development on the mandibular joint. Author carried out this study to find the histological changes of the mandibular joint in rats when the mandible applied posterior displacement. For the purpose of this study, $009\times036inch$ closed coil spring and 030inch orthopedic wire were used between the post occipital region and the chin region in order to render the orthopedic forces, posteriorly. The experimental animals vu. used 1 month old (GroupI), 3 months old (Group II), and 12 months old (Group III) rats. Following results were obtained; 1. At the beginning of the experimental Group I, there were predominant increment of Cartilage layer in the posterior parts of condylar head. Especially, the mature chondrocyte zone was increased. 2. In the experimental Group II, the chondroblastic zone was decreased while it showed slightly increased mature cartilage zone. 3. In the experimental Group III, the mature chondrocyte zone was disappeared gradually and there was a tendency to reduce the endochondral bone formation in condylar head. 4. After 30 days of experimental Group I and in experimental Group II, there was a tendency to decrease the immature cellular zone in the glenoid fossa by pressure. 5. There were no histological changes in the articular disc by pressure.

• Journal of Korean Neurosurgical Society
• /
• v.51 no.3
• /
• pp.160-163
• /
• 2012

We report an unusual case of lateral medullary infarction after successful embolization of the vertebral artery dissecting aneurysm (VADA). A 49-year-old man who had no noteworthy previous medical history was admitted to our hospital with a severe headache. Computed tomography (CT) revealed a subarachnoid hemorrhage, located in the basal cistern and posterior fossa. Cerebral angiography showed a VADA, that did not involve the origin of the posterior inferior cerebellar artery (PICA). We treated this aneurysm via endovascular trapping of the vertebral artery distal to the PICA. After operation, CT revealed post-hemorrhagic hydrocephalus, which we resolved with a permanent ventriculoperitoneal shunt procedure. Postoperatively, the patient experienced transient mild hoarsness and dysphagia. Magnetic resonance image (MRI) showed a small infarction in the right side of the medulla. The patient recovered well, though he still had some residual symptom of dysphagia at discharge. Such an event is uncommon but can be a major clinical concern. Further investigation to reveal risk factors and/or causative mechanisms for the medullary infarction after successful endovascular trapping of the VADA are sorely needed, to minimize such a complication.