• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.87-90
• /
• 2007

A general purpose program NUFLEX for the analysis 3-D thermo/fluid flow and pre/post processor in complex geometry has been developed, which consists of a flow solver based on FVM and GUI based pre/post processor. The solver employs a general non-orthogonal grid system with structured grid and solves laminar and turbulent flows with standard/RNG ${\kappa}-{\varepsilon}\;SST$ turbulence model. In addition, NUFLEX is incorporated with various physical models, such as interfacial tracking, cavitation, MHD, melting/solidification and spray model. For the purpose of verification of the program and testing the applicability, many actual problems are solved and compared with the available data. Comparison of the results with that by STAR-CD or FLUENT program has been also made for the same flow configuration and grid structure to test the validity of NUFLEX.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.29-35
• /
• 1998

In this paper, the on-going effort and progress for developing an integrated software for automated CFD application is described. As an outcome of the effort devoted so far, a new system, ICFDIT, is developed and introduced in this paper. The new system can be used to solve fluid dynamics problems in a convenient graphical environment, and it includes a pre-processor, a main-processor, and a post-processor. Usage of the system and examples are demonstrated, and some issues for improvement of the system are discussed.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.1011-1012
• /
• 2006

In this paper, implementation process of standard platform for T-DMB Receiver in low-cost and small-size are following: First, implement SoC for 32 bit RISC CPU and 16 bit DSP, Hardware H.264 CODEC, Post Processor or Video Display, Audio Processor, I/O Device. Second, implement Real Time OS for flexible application. Third, propose simple architecture for interface with peripheral devices using one-chip processor.

• Journal of Korea Foundry Society
• /
• v.11 no.1
• /
• pp.54-62
• /
• 1991

A computer program which consists of pre-processor, main solidification simulator and post-processor has been developed for three dimensional solidification analysis of steel castings. The pre-processor is used for mesh generation in a small personal computing system. The modified finite difference method is adopted for the main solidification simulation algorithm. The post -processor graphically presents the simulation results and shows the formation of shrinkage defects. Several experiments on large steel castings in sand mold were carried out. The temperature variations in casting and mold with time are measured experimentally, and the results are compared with calculation results. Several numerical examples for the prediction of shrinkage cavity in large steel casting of SC42 and SCNCrM2 alloys are compared with experimental results. The effect of sleeve and chills on solidification patterns are also studied. Formation of shrinkage defects for the three cases of experimental castings are relatively well predicted by present model.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2410-2413
• /
• 2005

Finite element method (FEM) has been widely used as a useful numerical method that can analyze complex engineering problems in electro-magnetics, mechanics, and others. CEMTool, which is similar to MATLAB, is a command style design and analyzing package for scientific and technological algorithm and a matrix based computation language. In this paper, we present new 3D FEM package in CEMTool environment. In contrast to the existing CEMTool 2D FEM package and MATLAB PDE (Partial Differential Equation) Toolbox, our proposed 3D FEM package can deal with complex 3D models, not a cross-section of 3D models. In the pre-processor of 3D FEM package, a new 3D mesh generating algorithm can make information on 3D Delaunay tetrahedral mesh elements for analyses of 3D FEM problems. The solver of the 3D FEM package offers three methods for solving the linear algebraic matrix equation, i.e., Gauss-Jordan elimination solver, Band solver, and Skyline solver. The post-processor visualizes the results for 3D FEM problems such as the deformed position and the stress. Consequently, with our new 3D FEM toolbox, we can analyze more diverse engineering problems which the existing CEMTool 2D FEM package or MATLAB PDE Toolbox can not solve.

• Journal of Korea Foundry Society
• /
• v.13 no.3
• /
• pp.268-275
• /
• 1993

In gravity die casting, die cooling systems are frequently employed with water cooling to remove the heat of the solidifying metal. Thermal modeling is an important technique in mold design for improving the productivity of the process. Computer simulation system which consists of pre-processor, main solidification simulator and post-processor has been developed for three dimensional solidification analysis of cyclic gravity die casting. The pre-processor is used for mesh generation in a PC system. The modified finite difference method is adopted for the main solidification simulation algorithm during all the casting cycles. The post-processor graphically presents the simulation results. Several experiments in automotive cast piston were carried out. The temperature variations in casting and mold with time are measured experimentally, and the results are compared with calculation results. The effects of cycle number on solidification pattern are also studied. Several experimental results for the prediction of shrinkage defects are compared with calculated results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.4
• /
• pp.263-268
• /
• 2004

In this paper, we motivate the post-mask performance enhancement technique combined with the Multi-Threshold Voltage CMOS (MTCMOS) leakage current suppression technology, and integrate the new design issues related to the MTCMOS technology into the ASIC design methodology. The issues include short-circuit current and sneak leakage current prevention. Towards validating the proposed techniques, a Personal Digital Assistant (PDA) processor has been implemented using the methodology, and a 0.18um process. The fabricated PDA processor operates at 333MHz which has been improved about 23% at no additional cost of redesign and masks, and consumes about 2uW of standby mode leakage power which could have been three orders of magnitude larger if the MTCMOS technology was not applied.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.3
• /
• pp.69-78
• /
• 2001

This paper presents a process and operation planning system and an NC code post-processor for effective machining of press dies for production of cars. Based on the machining feature, major parts of press dies are categorized into 15 groups and a standard process plan is defined for each group. The standard process plan consists of a series of processes where a process is defined as a group of operations that can be done with one setup. Details such as cutting tools, cutting conditions, and tool paths are decided at the operation planning stage. At the final stage of process and operation planning, the NC code post-processor adjusts feedrates along the tool path to reduce machining time while maintaining the quality. The adjustment rule is selected based on the machining load estimated by virtual machining.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.1
• /
• pp.89-97
• /
• 2009

In this paper, a computer software for dynamic analysis of a high mobility tracked vehicle with pre/post processor is developed. Model of a tracked vehicle is composed of chassis, turret, mount, gun, and road-wheel assembly. Track is modeled as an extensible cable and the track tensions are applied on the wheels as external forces. The system equations of motion and constraint acceleration equations are derived in the joint coordinate space using the velocity transformation method. The pre and post processors are developed using the Visual C++.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.3
• /
• pp.35-40
• /
• 2011

5-axis laser cutting has great advantages when it is applied to three dimensional machining requiring high cutting quality. For developing 5-axis CNC laser cutting systems, however, many problems such as rotating a laser head or a working table, 5-axis servo-control mechanism, tool path generation and post-processing, and collision avoidance between a laser head and a work-piece should be solved. In this paper, we deal with developing a motion simulator for 5-axis laser cutting machine with a nutating cutting head whose rotational axis is in an inclined plane. Two essential modules such as post-processor and cutting motion simulator was developed based on a commercial 3D CAD of UG-NX. The developed system was applied to three dimensional cutting products and showed the validity of the developed methods.