• 항공우주시스템공학회지
• /
• 제6권1호
• /
• pp.13-18
• /
• 2012

This paper presents a structural health monitoring method of aircraft reciprocating engine using Principal Component Analysis (PCA) which analyzes vibration expressed by Averaged Normalized Power Spectral Density (ANPSD). Because ANPSD of the rotating shaft is sensitive to the rotating speed, this paper proposes to use a post-processing method of ANPSD is used to reduce the sensitivity. The PCA extracts compressed information from the post-processed ANPSDs and the information means the difference between current and normal cases of the engine. The experimental results demonstrate the feasibility and effectiveness of the proposed method to detect abnormal cases of the engine.

• Journal of Radiation Protection and Research
• /
• 제31권4호
• /
• pp.197-201
• /
• 2006

Daily and seasonal variations of the ambient gamma ray exposure rates were measured by using a pressurized ion chamber from January 2003 to December 2005 in the CheongJu Regional Radiation Monitoring Post and the patterns of the distributions were studied. The annual average of the daily variation of the exposure rate was $\sim0.17{\mu}R/h$. The exposure rate was found to be maximum during 8:00 am to 9:00 am and minimum during 8:00 pm to 10:00 pm. For the annual data, the exposure rate was the minimum during the month of February. The exposure rate increased from February to mid-October (except during the period from May to July with no change) and decreased from October to February. The seasonal variation was found to be about $1{\mu}R/h$. Most of the measured values (96%) of the exposure rates fell under the normal distribution with a deviation of less than 4.8% and the remaining 4% had large fluctuations caused mainly by the rainfalls.

• 한국해양공학회지
• /
• 제16권4호
• /
• pp.32-36
• /
• 2002

In this paper, a numerical methodology for health monitoring of weldment was proposed using finite element method coupled with continuum damage mechanics. The welding-induced residual stress distribution of T-joint weldment was calculated using a commercial finite element package SYSWELD+. The distribution of latent damage was evaluated from the stress and strain components taken as the output of a finite element calculation. Numerical examples were given to demonstrate the usefulness of this so-called "post-processing approach" in the case of welding-induced damage assessment.

• Advances in Computational Design
• /
• 제5권1호
• /
• pp.91-109
• /
• 2020

Over the past few decades, the impact of natural, manmade and natech (natural hazard triggering technological disasters) disasters has been devastating, affecting over 4.4 billion people. In spite of recent technological advances, the increasing frequency and intensity of natural disasters and the escalation of manmade threats is presenting a number of challenges that warrant immediate attention. This paper explores the integration of drones or Unmanned Aerial Vehicles (UAV's) into infrastructure monitoring and post-disaster assessment. Through reviewing some of the recent disasters, effectiveness of utilizing UAV's in different stages of disaster life cycle is demonstrated and needed steps for successful integration of UAV's in infrastructure monitoring, hazard mitigation and post-incident assessment applications are discussed. In addition, some of the challenges associated with implementing UAV's in disaster monitoring, together with research needs to overcome associated knowledge gaps, is presented.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.902-909
• /
• 2020

It is announced a new procedure for the real-time overall hull response monitoring system depends on inclinometer sensor data. The procedure requires a few inclinometer sensors' data, located on the deck. Sensor data is used to obtain curvature values; and curvature values are used to find out displacements or relevant moment values according to pre-calculated moment-curvature diagrams. Numerical studies are demonstrated with reasonable accuracy for the pre-ultimate and the post-ultimate nonlinear behaviors. Elastic, inelastic, and post-collapse structural bending moment capacity determination of the hull has been presented. The proposed inverse engineering technique will be able to see the response of the hull in real-time with high accuracy to manage the course and speed when cruising or control the loading and the unloading process at the port.

• 한국환경복원기술학회지
• /
• 제21권2호
• /
• pp.77-85
• /
• 2018

The intensive habitats loss of natural organisms as a consequence of anthropogenic activities has lead to the use of alternative habitats for species conservation. We reviewed the current status of alternative habitats and suggest the improvement of alternative habitats. Most of alternative habitats regarded in this study are not following the pre-arranged consultation at environmental impact assessment. These alternative habitats are rendered useless due to the insufficient consideration of ecological characteristics of species and lack of detailed plans. A number of alternative habitats are influenced by disturbance such as environmental pollution and construction. Post-monitoring of alternative habitats are needed to estimate immigration rate of species. Post management is also needed to assess the status of population stability. Overall, low effectiveness of alternative habitats is presented in this study. According to the status survey, methods for improvement of alternative habitats are required such as detailed guidelines, establishment of post-monitoring system, improvement of habitat restoration techniques, and guidelines for management and operation of alternative habitats.

• Journal of Korean Neurosurgical Society
• /
• 제66권5호
• /
• pp.543-551
• /
• 2023

Objective : This study aimed to investigate the current status of intracranial pressure (ICP) monitoring in patients with severe traumatic brain injury (sTBI) in Korea and the association between ICP monitoring and prognosis. In addition, a survey was administered to Korean neurosurgeons to investigate the perception of ICP monitoring in patients with sTBI. Methods : This study used data from the second Korea Neurotrauma Databank. Among the enrolled patients with sTBI, the following available clinical data were analyzed in 912 patients : Glasgow coma scale score on admission, ICP monitoring, mortality, and extended Glasgow outcome scale score at 6 months. In addition, we administered a survey, entitled "current status and perception of ICP monitoring in Korean patients with sTBI" to 399 neurosurgeons who were interested in traumatic brain injury. Results : Among the 912 patients, 79 patients (8.7%) underwent ICP monitoring. The mortality and favorable outcome were compared between the groups with and without ICP monitoring, and no statistically significant results were found. Regarding the survey, there were 61 respondents. Among them, 70.4% of neurosurgeons responded negatively to performing ICP monitoring after craniectomy/craniotomy, while 96.7% of neurosurgeons responded negatively to performing ICP monitoring when craniectomy/craniotomy was not conducted. The reasons why ICP monitoring was not performed were investigated, and most respondents answered that there were no actual guidelines or experiences with post-operative ICP monitoring for craniectomy/craniotomy. However, in cases wherein craniectomy/craniotomy was not performed, most respondents answered that ICP monitoring was not helpful, as other signs were comparatively more important. Conclusion : The proportion of performing ICP monitoring in patients with sTBI was low in Korea. The outcome and mortality were compared between the patient groups with and without ICP monitoring, and no statistically significant differences were noted in prognosis between these groups. Further, the survey showed that ICP monitoring in patients with sTBI was somewhat negatively recognized in Korea.

• Smart Structures and Systems
• /
• 제4권6호
• /
• pp.711-726
• /
• 2008

A number of efforts had been sought to instrument bridges for the purpose of structural monitoring and assessment. The outcome of these efforts, as gauged by advances in the understanding of the definition of structural damage and their role in sensor selection as well as in the design of cost and data-effective monitoring systems, has itself been difficult to assess. The authors' experience with the design, calibration, and operation of a monitoring system for the Kishwaukee Bridge in Illinois has provided several lessons that bear upon these concerns. The systems have performed well in providing a continuous, low-cost monitoring platform for bridge engineers with immediate relevant information.

• 대한이식학회지
• /
• 제32권4호
• /
• pp.75-83
• /
• 2018

Background: This study was designed to analyze the clinical usefulness of mycophenolic acid trough concentration monitoring in kidney transplantation patients who were maintained with cyclosporine. Methods: The data of patients who underwent mycophenolic acid trough concentration monitoring after their first kidney transplant between November 2006 and August 2013 and were prescribed with cyclosporine, mycophenolate, and methylprednisolone were reviewed retrospectively. Cox analysis was used to analyze the risk factors for acute rejection within 1 year post-transplantation. Results: Among 90 patients, 41 (45.6%) achieved both the target levels of cyclosporine and mycophenolic acid, while three patients (3.3%) failed to achieve the target level of either cyclosporine or mycophenolic acid. Nine patients (10.0%) only achieved the mycophenolic acid target level and 37 patients (41.1%) only achieved the cyclosporine target level. While patients who achieved only the mycophenolic acid target concentration had no statistically increased risk compared to patients who achieved both target levels (hazard ratio [HR], 1.569; 95% confidence interval [CI], 0.316 to 7.778; P=0.581), patients who only achieved the cyclosporine target concentration showed an increased risk of rejection compared to the both achievement group (HR, 4.112; 95% CI, 1.583 to 10.683; P=0.004). Patients who had no achievement in the target levels showed significantly increased rejection risk compared to the patients who achieved both target levels (HR, 17.811; 95% CI, 3.072 to 103.28; P=0.001). Conclusions: Mycophenolic acid trough concentration monitoring combined with cyclosporine trough concentration monitoring is useful for avoiding acute cellular rejection if the first 1 year post-transplantation.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.1-9
• /
• 2016

본 우리나라 철도 영업 구간중 철도교량은 2012년 기준 약 25%를 차지한다. 이러한 교량 구조들은 시공 직후부터 열차의 충격하중, 태풍, 선박 및 차량 충돌 등 다양한 하중을 받게 된다. 특히 고속 철도 교량의 경우, 열차의 속도로부터 전가되는 매우 큰 충격하중을 받게 되며, 이러한 교량에 가해지는 충격 응답을 분석하는 것은 교량의 안전성 평가에 매우 중요하다. 최근 무선 센서를 이용해 교량의 건전성을 평가하는 연구들이 주목받고 있다. 무선 센서는 가격 및 설치의 용이성으로 인해 교량의 응답계측에 유용하게 적용되고 있다. 하지만 고속철도 교량에서 발생하는 충격 하중은 그 지속시간이 10초 내외로 매우 짧게 발생하므로, 기존 무선 센서의 시스템의 자체 실행 후 시간 지연으로 인해, 이러한 충격하중의 계측은 매우 어렵게 된다. 따라서 본 연구에서는 철도 교량의 충격하중에 의한 구조물의 응답을 계측하기 위한 하드웨어 및 소프트웨어 프레임워크를 제안한다. 구체적으로 1) 초저전력 가속도계를 이용한 구조물의 과도응답 감지 및 평가, 2) 무선 센서 네트워크의 트리거링 후 계측이 시작되는 지연 시간의 단축, 그리고 네트워크의 시간 및 데이터 동기화 기법을 개발하였다. 최종적으로 제안된 프레임 워크에서 소수의 진동 감지 센서 노드들이 상시진동을 계측하며, 열차의 진입으로 인한 진동이 감지될 시, 전체 센서 네트워크의 계측을 시작한다. 시간 지연을 최소화하기 위해 모든 센서는 다른 시작시간을 가지며, 이를 제어하기 위해 후처리 기반 시간 동기화를 한다. 제안된 프레임워크는 실내실험 및 수치해석을 통해 그 효용성을 입증하였다.