• 제목/요약/키워드: Post tensioned

검색결과 196건 처리시간 0.022초

중력하중으로 설계된 포스트텐션 플랫플레이트 골조의 내진성능 (Seismic Performance of Gravity-Load Designed Post-Tensioned Flat Plate Frames)

  • 박영미;유연호;한상환
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.127-128
    • /
    • 2010
  • 본 연구에서는 기둥을 관통하는 슬래브 하부 철근이 중력하중만으로 설계된 포스트텐션 플랫플레이트 골조의 내진성능에 미치는 영향을 평가하였다. PT 플랫플레이트 골조에서는 슬래브 하부 철근에 대해 ACI 318-08에서는 특별한 언급이 없기 때문에 흔히 생략하고 있다. 대상건물을 비선형 시간이력해석으로 평가한 결과, PT 플랫플레이트 골조의 내진성능은 기둥을 관통하는 슬래브 하부철근이 위치할 때 눈에 띄게 향상되었다.

  • PDF

고속축중시스템 설치구간 PTCP 공법의 현장 적용성 (Field Application of Post-Tensioned Concrete Pavement for High Speed Weigh-in-motion System)

  • 김동호;이현호;강재규;배종오;김기헌
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.449-450
    • /
    • 2010
  • 고속축하중측정시스템이 설치되는 구간의 포장은 소성변형이 없고 내구성이 우수해야 센서의 정확도와 측정의 반복성이 유지될 뿐만 아니라 센서가 파손되지 않고 장기간 운용될 수 있다. 따라서 본 연구에서는 중차량에 대한 저항성과 내구성이 우수한 콘크리트 포장 공법 중 균열발생이 방지되고 파손과 유지보수가 최소화 될 수 있어 WIM 시스템을 효율적으로 운영할 수 있는 포스트텐션 콘크리트 포장 공법을 시공, 현장 적용성을 평가하였다.

  • PDF

포스트텐션 콘크리트 포장의 고속축중계 센서 설치구간 적용을 위한 현장실험 (Field Experiment of Post-Tensioned Prestressed Concrete Pavement for Weigh-in-Motion Sensor Installed Section)

  • 박희범;김성민;윤동주;김동호
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.15-16
    • /
    • 2010
  • 본 연구는 고속축중계 센서(Weigh-in-Motion)를 PTCP 슬래브 구간에 적용하기 위한 현장실험과 거동분석을 수행하였다. 실험결과 PTCP에 부분 절삭을 하여 WIM 센서를 설치하더라도 절삭부분의 변위 변화가 무시 할 수 있을 정도로 작으므로 안정성이 확보된다고 할 수 있다.

  • PDF

포스트텐션 콘크리트 포장 공법 설계지침 개발 (Design Guide of Post-Tensioned Prestressed Concrete Pavement)

  • 박희범;김성민;배종오
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.17-18
    • /
    • 2010
  • 이 연구는 포스트텐션 콘크리트 포장(PTCP) 공법의 설계지침을 개발하기 위하여 수행되었다. 구조해석 및 실험을 통해 PTCP의 거동을 분석하였으며 이를 바탕으로 슬래브 크기, 설계 환경 및 차륜 하중, 종방향 및 횡방향 긴장과 긴장방식 결정을 통해 최적의 PTCP 설계지침을 개발하였다.

  • PDF

Analysis of stress distribution in anchorage zones of pretensioned beams

  • Gens, F.;Dotreppe, J.C.
    • Computers and Concrete
    • /
    • 제1권3호
    • /
    • pp.249-260
    • /
    • 2004
  • The stress transmission mechanism in pretensioned concrete beams, though very interesting from an economical point of view, is very complex, integrating various phenomenons such as sliding, bond, bursting. For long the complexity of this mechanism has led engineers to provide a massive rectangular anchorage zone at each end of the beam. The necessity of using such a concrete reinforcement is certainly unquestionable in post-tensioned beams. However in pretensioned elements the stresses induced in concrete in the anchorage zone are smaller than in post-tensioned elements. In this article the stress field in the end zone is calculated numerically and from this analysis the possible reduction of the cross-section of the anchorage block is examined.

PSC 박스거더 교량부재의 횡방향 프리스트레싱에 따른 구조거동 실험연구 (An Experimental Study on Structural Behavior of Concrete Box Girder Member with Transverse Prestressing)

  • 오병환;최영철;최정선;이성철
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
    • /
    • pp.77-80
    • /
    • 2004
  • In bridge deck systems, deflections and cracking can be controlled by longitudinal and transverse prestressing, There are some benefits, longitudinal cracking control, the thickness reduction of deck slab, the widening of deck width and the reduction of the cross section area, in transversely post-tensioned concrete box girder bridges. However, it has been not sufficient to study the structural behaviors of transversely post-tensioned concrete box girder. Therefore, It is needed to predict the structural behaviors by prestressing and static loading. In this study, the analytical and experimental load tests are carried out to study the effect of transverse prestressing on concrete box girder. For these objectives, four test specimens are fabricated with various tendon spacing and steel ratio of top slab. The analytical and experimental studies are performed to estimate effects of the prestressing and failure tests.

  • PDF

The influences of equivalent viscous damping ratio determination on direct displacement-based design of un-bonded post-tensioned (UPT) concrete wall systems

  • Anqi, Gu;Shao-Dong, Shen
    • Smart Structures and Systems
    • /
    • 제30권6호
    • /
    • pp.627-637
    • /
    • 2022
  • Recent years, direct displacement-based design (DDBD) procedure is proposed for the design of un-bonded posttensioned (UPT) concrete wall systems. In the DDBD procedure, the determination of the equivalent viscous damping (EVD) ratio is critical since it would influence the strength demand of the UPT wall systems. Nevertheless, the influence of EVD ratio determination of the UPT wall systems were not thoroughly evaluated. This study was aimed to investigate the influence of different EVD ratio determinations on the DDBD procedure of UPT wall systems. Case study structures with four, twelve and twenty storeys have been designed with DDBD procedure considering different EVD ratio determinations. Nonlinear time history analysis was performed to validate the design results of those UPT wall systems. And the simulation results showed that the global responses of the case study structures were influenced by the EVD ratio determination.