• Tunnel and Underground Space
• /
• v.23 no.6
• /
• pp.572-580
• /
• 2013

In this case study, I examined the microseismic safety management system of Deep Heat Mining Basel (DHMB) as EGS Geothermal Project which was conducted in Basel, Switzerland. EGS Geothermal Power projects which require induced seismic event by stimulation for creation of EGS geothermal reservoir have to be controlled pressure and flow rate of stimulation by establishment of microseismic safety management system. Traffic light system and Communication response procedure of DHMB project to respond step by step corresponding microseismic event intensity through continuous monitoring during stimulation period have been managed and established in advance of stimulation. However, the project was discontinued because of an earthquake to occur larger than expected one due to post-injection seismicity occurring in the geothermal reservoir after completion of injection for stimulation. The result of post analysis, Real-time traffic light system was verified to need a establishment of new microseismic safe management system to be considered post-injection seismicity phenomenon.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.3
• /
• pp.157-162
• /
• 2003

Background : The surgical removal of impacted mandibular third molar can result in considerable pain, swelling, and dysfunction that patient are incapable of work for several days. Factors contributing to post operative swelling, trismus and pain are complex. There is no question but that the procedure of surgically removing an impacted mandibular third molar is inherently a traumatic one and that some sequelae related to the inflammation response are expected. Meticulous surgical technique will minimize the sequelae of inflammation but will not prevent them. In an effort to minimize these sequelae the use of steroid was instituted. Patients and Methods : Present study was to investigate the effect of one preoperative steroid injection in the masseter muscle to the patients(male 9, female 11) who needed prophylactic removal of bilateral, symmetrical, impacted wisdom teeth in the mandible on the complaint like swelling, trismus and pain. through Double-Blind test. Results : 1. After 24 hours investigation, preoperative steroid injection had significantly reduced swelling with 39% and trismus with 57.5%. 2. $7^{th}$ post operative day investigation, reduced swelling and trismus had shown, however, not significant. 3. There wasn't major difference from the group who took preve-ntive steroid in the visual analogue scale, the first analgesic intake time and the pain period. 4. There wasn't any adverse reaction of steroid for 20 patient From the above result, If the patients are not contraindication to steroid and pronounced post operative reaction can be expected the use of steroid to the surgical removal of impacted mandibular third molar is recommended.

• Clinics in Shoulder and Elbow
• /
• v.26 no.1
• /
• pp.64-70
• /
• 2023

Background: This study aimed to analyze the efficacy of single-dose corticosteroid injection (CSI) administered at 6 weeks postoperative to treat stiffness following arthroscopic rotator cuff repair (ARCR). Methods: In this prospective, multicentric, case-control study, post-ARCR stiffness at 6 weeks was treated with either a single dose of intra-articular CSI (CSI group) or physical therapy with oral analgesics (non-CSI group). Pain intensity according to visual analog scale (VAS), functional outcome using the Constant Murley Shoulder Score, time to return to activities of daily living (ADLs), and retear rate were recorded at 6 weeks, 9 weeks, 12 weeks, 6 months, 12 months, and 18 months postoperatively in both groups. Results: A total of 149 patients (54.5%) in the CSI group and 124 patients (45.5%) in the non-CSI group were included in this study. Pain and function were significantly better in the CSI group at 9-week, 12-week, and 6-month (P<0.001) follow-up, whereas they were not significantly different when the groups were compared at 12- and 18-month follow-up. The mean duration to return to ADLs was significantly shorter (P<0.001) in the CSI group. The incidence of retears was not significantly different (P=0.36) between groups at the end of 18 months of follow-up. Conclusions: Single-dose intra-articular CSI administered at 6 weeks postoperative to treat post-ARCR stiffness significantly improved pain, function, and duration of return to ADLs without increasing the risk of retears compared to patients who did not receive intra-articular CSI. Level of evidence: III.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.654-659
• /
• 2009

Purpose: A botulinum toxin type A (BoNT - A) injection has been used as a noninvasive management for lower face contouring since 2000. The aim of this study was to compare reduction rate of lower face width for a longtime according to repeated Botox$^{(R)}$ injections on masseter muscles for lower face contouring procedure. Methods: Forty - five patients were analyzed for single session of Botox$^{(R)}$ injection and 13 patients were evaluated for repeated Botox$^{(R)}$ injections for over two years. Single injection group was tracked regular intervals at 1, 3, 6, 10, 12 months after injection, and repeated injection group was measured at every injection time. Twenty - five to thirty units of Botox$^{(R)}$ was injected into each masseteric muscle at five to six points at the prominent portions of the mandibular angle. Standardized frontal view of digital photographs were analyzed by Adobe Photoshop$^{(R)}$ (version CS3) to measure an reduction rate of lower face width. Results: Reduction rate was 3.7%, 6.9%, 6.2%, 4%, 4% at 1, 3, 6, 10, 12 months post injection each other in single injection group. However, more than 8% reduction rate was found in repeated injection group persistently for more than two years. Conclusion: This study shows that effective duration of Botox$^{(R)}$ injection for lower face contouring is expected to continue over one year clinically. Moreover, repeated injections maintained lower reduction rate consistently for a long time. Therefore, repeated injections on masseter muscles at regular intervals are most effective procedure for lower face contouring.

• Korean Journal of Animal Reproduction
• /
• v.21 no.3
• /
• pp.229-238
• /
• 1997

Chromosome condensation and swelling of the donor nucleus have been known as the early morphological indicators of chromatin remodelling after injection of a foreign nucleus into an enucleated recipient cytoplasm. The effects of non-preactivation and electrical preactivation of recipient cytoplasm, prior to fusing a donor nucleus, on the profile of nuclear remodelling in the nuclear transplant rabbit embryos were evaluated. The embryos of 16-cell stage were collected and synchronized to G1 phase of 32-cell stage. The recipient cytoplasms were obtained by removing the first polar body and chromosome mass by non-disruptive microsurgical procedure. The separated G1 phase blastomeres of 32-cell stage were injected into non-preactivated recipient cytoplasms. Otherwise, the enucleated recipient cytoplasms were preactivated by electrical stimulation and the separated G1 phase blastomeres of 32-cell stage were injected. After culture until 20h post-hCG injection, the nuclear transplant oocytes were electrofused by electrical stimulation. The nuclei of nuclear transplant embryos fused into non-preactivated and/or preactivated recipient cytoplasm were stained by Hoechst 33342 at 0, 1.5, 2, 4, 6, 8, 10 hrs post-fusion and were observed under an fluorescence microscopy. Accurate measurements of nuclear diameter were revealed with an ocular micrometer at 200$\times$. Upon blastomere fusion into non-preactivated recipient cytoplasm, a prematurely chromosome condensation at 1.5 hrs post-fusion and nuclear swelling at 8 hrs post-fusion were occurred as 91.6% and 86.1%, respectively. But the nuclei of nuclear transplant embryos fused into preactivated recipient cytoplasm, as o, pp.sed to non-preactivated recipient cytoplasm, were not occurred chromosome condensation and extensive nuclear swelling. Nuclear diameter fused into non-preactivated and preactivated recipient cytoplasm at hrs post-fusion was 30.2$\pm$0.74 and 15.2$\pm$1.32${\mu}{\textrm}{m}$, respectively. These results indicated that onset of unclear condensation and swelling which was associated with oocytes activation were critical steps in the process of chromatin swelling. Futhermore, complete reprogramming seemed only possible after remodelling of the donor nucleus by chromosome condensation and nuclear swelling.

• Journal of Acupuncture Research
• /
• v.36 no.3
• /
• pp.147-153
• /
• 2019

Background: The aim of this study was to investigate the safety and analgesic effects of Datura Flos pharmacopuncture (DFP). Methods: The analgesic effects of DFP were assessed using mechanical (hot plate), chemical (formalin test), and thermal (von Frey filament test) pain tests. Forty male Sprague Dawley rats were assigned randomly into DFP (75 mg/kg, 150 mg/kg), lidocaine 0.5%, or normal saline group for treatment on Kl3. Gross pathology, histopathology, biochemistry and hematology were performed. Results: In the hot plate test, DFP at a high dose (HDDFP; 150 mg/kg) produced a significant analgesic effect, at 10 and 20-minutes post injection (p < 0.01). Low dose DFP (LDDFP; 75 mg/kg) also showed an analgesic effect at 10 minutes post injection (p < 0.01). In the formalin test, HDDFP produced an analgesic effect, for 0-10 and 10-20 minutes (p < 0.01) post treatment, whereas LDDFP showed analgesic effects between 10-20 minutes (p < 0.05). In the von Frey filament test, DF-H produced an analgesic effect, 10 (p < 0.01) and 20 minutes post treatment (p < 0.05). LDDFP showed analgesic effect at 10 minutes (p < 0.05). In the acupuncture response test, HDDFP produced an analgesic effect at 10 minutes post treatment (p < 0.05). DF-H did not cause any anatomical changes to the liver or kidney and there were no abnormalities in biochemistry or hematology. Conclusion: DF-H was not toxic and provided short term analgesia, suggesting it may be useful in the management of pain.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1119-1124
• /
• 2008

This study presents the preform injection molding and the blow molding of the injection stretch-blow molding process for PET bottles. The numerical analysis of the injection molding and the blow molding of a preform is considered in this paper using CAE with a view to minimize the warpage and the thickness. In order to determine the design parameters and processing conditions in injection/blow molding, it is very important to establish the numerical model with physical phenomenon. In this study, a three dimensional model has been introduced for the purpose and flow simulations of filling, post-filling and cooling process are carried out. The simulations resulted in the warpage in good agreement with the measurements. Also, from the result of numerical analysis, we appropriately predicted the warpage, deformation and thickness distribution along the product walls.

• Journal of Power System Engineering
• /
• v.18 no.3
• /
• pp.51-58
• /
• 2014

Injection molding simulation provided optimized design results by analyzing quality problems while the product is in assembly or in the process of manufacturing with make automobile plastics. Frequent change of design, change of injection molding, repetition of test injection which was held in the old way can now be stopped. And quality upgrade is expected instead. This report deals with the effect which the position of injection molding automobile console gate and number has on product quality including pressure at end of fill, bulk temperature at end of fill, shear stress of end of fill, residual stress at post filling end, product weld lines and warpage results. Simpoe-Mold simulates the complete manufacturing process of plastic injected parts, from filling to warpage. Simpoe-Mold users, whether they are product designers, mold makers or part manufacturers, can identify early into the design stage potential manufacturing problems, study alternative solutions and directly assess the impact of such part modification, whatever the complexity and geometry of such parts, shell part as plain solid parts.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.4
• /
• pp.305-311
• /
• 2005

Flash memory software running on cellular phones and PDAs need to be tested extensively to cope with abrupt power and media faults. For those tests, we designed and implemented a Flash memory emulator with fault injection features. The fault injection tester has provided a helpful framework for designing fault recovery schemes and also for analyzing fault damages to the FTL (Flash Translation Layer) and file system for a Flash memory based system. In this paper, we discuss Plash memory fault types and fault injection features implemented on this Flash memory emulator. We then discuss in detail a design flaw revealed during fault injection tests. Specifically, it was revealed that a scheme that was believed to improve reliability instead, turned out to be harmful. In addition, we discuss post-fault behaviors of the FTL and the file system.

• The Journal of Korean Medicine
• /
• v.38 no.1
• /
• pp.34-45
• /
• 2017

Objectives: This study aimed to investigate the effect of banhasasim-tang intravenous herbal acupuncture (BST-IVHA) on emesis induced by chemotherapy in rats. Methods: This study used methotrexate(MTX)-induced Rat-Pica model. The rats were randomly allocated into seven groups; normal group, two saline groups, four Banhasasim-tang(BST) groups (groups treated with BST-IVHA). All the experimental animals except those in the normal group were injected with MTX. Those in the pre-treatment groups were treated with saline injection (saline group) or BST-IVHA (BST group) before MTX injection. Those in the post-treatment groups were treated with saline injection or BST-IVHA after MTX injection. Two different dosages of BST-IVHA solution (low dose; BST-1 group, high dose; BST-2 group) were used. The changes in body weight, food intake, and kaolin consumption at 24h, 48h, and 60h were monitored and analyzed. Results: 1. No significant change was found in body weight. 2. The food intake at 48h was increased significantly in the BST-1 pre-treatment group($19.89{\pm}0.01g$) compared to the pre-saline group($18.68{\pm}0.26g$). 3. The kaolin consumption was significantly decreased in the BST-1 pre-treatment group at 24h($0.24{\pm}0.02g$) and 60h($0.36{\pm}0.14g$), in the BST-2 pre-treatment group at 48h($0.02{\pm}0.01g$) and 60h($0.80{\pm}0.31g$) compared to the pre-saline group($24h:0.81{\pm}0.37g$, $48h:0.76{\pm}0.43g$, $60h:1.56{\pm}0.03g$). The kaolin consumption was also significantly decreased in the in the BST-1 post-treatment group at 24h($0.05{\pm}0.02g$), 48h($0.64{\pm}0.06g$) and 60h($0.14{\pm}0.05g$), in the BST-2 post-treatment group at 48h($0.01{\pm}0.01g$) and 60h($0.01{\pm}0.01g$) compared to the post-saline group($24h:0.51{\pm}0.4g$, $48h:3.58{\pm}0.33g$, $60h:2.5{\pm}0.2g$). Conclusions: BST-IVHA showed an anti-emetic effect in MTX-induced rat-pica model. This result suggests that BST-IVHA could be an effective treatment for chemotherapy-induced emesis.